BoardConfig.mk

#
# Copyright (C) 2015-2018 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This contains the module build definitions for the hardware-specific
# components for this device.
#
# As much as possible, those components should be built unconditionally,
# with device-specific names to avoid collisions, to avoid device-specific
# bitrot and build breakages. Building a component unconditionally does
# *not* include it on all devices, so it is safe even with hardware-specific
# components.

DEVICE_TREE := device/xiaomi/kenzo

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := msm8952
TARGET_NO_BOOTLOADER := true

# Platform
TARGET_BOARD_PLATFORM := msm8952
TARGET_BOARD_PLATFORM_GPU := qcom-adreno510

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := cortex-a53

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a53.a57

TARGET_CPU_CORTEX_A53 := true

TARGET_USES_64_BIT_BINDER := true
ENABLE_CPUSETS := true

# Kernel
#TARGET_KERNEL_SOURCE := kernel/xiaomi/msm8956
#TARGET_KERNEL_CONFIG := kenzo_defconfig
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
#TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
#BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb

TARGET_PREBUILT_KERNEL := $(DEVICE_TREE)/prebuilt/Image.gz-dtb

BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk ramoops_memreserve=4M
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
BOARD_KERNEL_BASE := 0x80000000
BOARD_KERNEL_PAGESIZE := 2048
BOARD_MKBOOTIMG_ARGS := --kernel_offset 0x00008000 --ramdisk_offset 0x01000000 --tags_offset 0x00000100

# Partitions
BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2684354560
BOARD_USERDATAIMAGE_PARTITION_SIZE := 26838785024
BOARD_FLASH_BLOCK_SIZE := 131072

# Partition Format
TARGET_RECOVERY_FSTAB := $(DEVICE_TREE)/recovery/root/etc/recovery.fstab

# File systems
BOARD_HAS_LARGE_FILESYSTEM := true
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# TWRP specific build flags
TW_THEME := portrait_hdpi
RECOVERY_SDCARD_ON_DATA := true
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"
TARGET_RECOVERY_QCOM_RTC_FIX := true
TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun0/file
TW_BRIGHTNESS_PATH := /sys/class/leds/lcd-backlight/brightness
TW_DEFAULT_BRIGHTNESS := 70
TW_DEFAULT_EXTERNAL_STORAGE := true
TW_EXCLUDE_SUPERSU := true
TW_INCLUDE_NTFS_3G := true
TW_INPUT_BLACKLIST := "hbtp_vm"
TW_IGNORE_MISC_WIPE_DATA := true

# Asian region languages
TW_EXTRA_LANGUAGES := true

# Encryption support
TW_INCLUDE_CRYPTO := true
TARGET_HW_DISK_ENCRYPTION := true
TARGET_KEYMASTER_WAIT_FOR_QSEE := true

# Debug flags
TWRP_INCLUDE_LOGCAT := true

# Init properties from bootloader BoardID version, ex. model info
TARGET_INIT_VENDOR_LIB := libinit_kenzo
TARGET_RECOVERY_DEVICE_MODULES := libinit_kenzo
TARGET_UNIFIED_DEVICE := true