Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Pinecil v2 doesn't boot on Baseus Blade 100w 20 000 mAh #1823

Open
mmaciejak opened this issue Oct 3, 2023 · 2 comments
Open

Pinecil v2 doesn't boot on Baseus Blade 100w 20 000 mAh #1823

mmaciejak opened this issue Oct 3, 2023 · 2 comments
Assignees

Comments

@mmaciejak
Copy link

Describe the bug
When trying to power the device through the Baseus Blade 100w 20 000 mAh powerbank, screen of the Pinencil stays black, sames happen when trying to boot in debug mode by holding the plus button while plugging the device in. Powerbank briefly displays 5V 0A on it's screen. Powerbank works fine with other devices, some as cable (Baseus 100W USB C). Pinencil also works fine when powered through Baseus 65W charger and boots normally when powered through PC USB C port

Details of your device:

  • Device: [Pinecil V2]
  • Release: [2.22.E.C0A5E244], same behaviour was present with 2.20 before upgrading

Additional context
Tried updating from 2.20 to 2.22 RC2, and changing PD timeout from 1-50 by 5 step and turning it off as well as turning off PD VPO

@Ralim
Copy link
Owner

Ralim commented Oct 6, 2023

Hia,
Really the main thing to help debug this would be a capture of the USB-PD traffic. Without that I'm guessing to be quite honest.
If you connect the Pinecil while holding the rear button (programming) does the power supply "start up" (though of course Iron will stay turned off)?

@mmaciejak
Copy link
Author

Hey @Ralim,
I just tried and by holding the minus button when plugging in, exactly the same thing happens. Powerbank briefly displays 5V 0A and then it seems to turn off. I don't have any hardware to capture PD traffic, unfortunately.

I also tried powering the iron through USB A port of the same power bank with some off-brand USB A to USB C cable and it gives mixed results sometimes the iron stays at 5 V and sometimes it seems to negotiate successfully for 9V, obviously, it is not operating normally on 9V but starts heating up. Also when powered through USB A port and pencil is left idle the power bank seems to kill the charging frequently. The pencil flashes the electric plug symbol, and it sporadically reboots, I tried to see if adjusting the power pulse settings would help, and it somehow helps but even on the highest settings, when the tip gets over 100°C on idle it still reboots sporadically on idle.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants