SEQURE SI012 (TS100 clone w/ USB-PD)

[Zipties]

I picked this up the other day and I think it should run IronOS alright being it is mostly a clone of the ts100, but having USB-PD I am not sure which firmware package I should go with.

[Ralim]

Hello, If sequre release schematics it would be interesting to look at support.

It looks like an expensive copy of the pinecil at first glance but if hardware is similar to others support should be doable.

[Zipties]

It looks like an expensive copy of the pinecil at first glance but if hardware is similar to others support should be doable.

Eek, it sure does. I was looking at their ts100 clone and grabbed this one because it had PD and the same specs.

That’s embarrassing 🤦‍♂️

[Egrchs]

Hello! I would like to know if you managed to install the IRON OS firmware on SEQURE SI 012? Thanks!

[mr-sm1th]

a friend just got screwed by this company,
there are 2 SI012 versions, old and new.
new version identifies as a usb mass-storage on the pc,
old version identifies as a usb serial port.
the scumbags - i mean company says the older version cant be upgraded and is using the "final" software version.
this iron running old bootloader/firmware or whatever was only delivered 2 days ago!

so a question to anybody who has a "SI012", does it identify as mass-storage or serial? and what is the cpu part number in it?
i want to find out if they changed the hardware or only the firmware.

if your thinking of buying one of these - dont!

[mr-sm1th]

just got sent some pcb pics.
i hope it has a second microcontroller under the oled,
because in the pictures this crap has an Atmel atmega328p in it!!!!!
incase anybody asks, the pcb is black. i have been told some have a red pcb so i dont know if that relates.

[River-Mochi]

old version identifies as a usb serial port.

usb serial port is ok for updating. This is how Pinecil works. Pinecil V2 identifies in Windows as Serial COM port when you hold down the [-] button before plugging into the PC.
Pinecil is not like ts100, Pinecil will also never show up as a USB mass storage device and that is done on purpose.

On newest V2 pinecil, We simply hold down [-] button, Plug it into USB-C cable. The windows PC for example device manager adds it as a new Serial Port COMM. then we run an updater from the chip manufacturer or convenient Community made flasher that is CLI .
grab IronOS from here, and it's done.

Therefore you might Still be able to upgrade your Sequire S1012.

1. Ask them what buttons to press to enter flashing / Update mode. how long and procedure basically.
2. ask them for a link to schematic, tell them that is the only way that open source Ralim's IronOS could start looking at it for possible use of IronOS on the device.
3. find out from them EXACTLY which MCU chip is used on it. sometimes you can use a chip flasher from the manufacturer of the chip to flash it with IronOS also.

[mr-sm1th]

they dont care, they offered a 10% refund because it cant be updated as described and left it at that.
the usb-serial shows up without pressing buttons and the cpu is an atmega328p with a huge 32k of flash and i actually doubt it's connected to the usb directly because running a soft usb-core takes a lot from the cpu.
maybe it has a WCH usb-serial chip, but even then there is no known upload protocol to use.
if software was written for it, you would have to use something like a USBasp to write a new bootloader first - maybe the arduino one would be a good choice.

[Dmitriy369856]

SI012

Microcontroller CKS32F103C8T6

Identification is possible only with a clamped button A or B with a subsequent connection to a PC
Pressed button A, connection to PC

Pressed button B, connection to PC

[mr-sm1th]

looks like a clone of an ST 32f103 with 64k of flash

[Dmitriy369856]

Yes, CKS32F103C8T6 is the Chinese ? analogue STM32F103C8T6 only with 64KB flash memory, and not 128kb like most STM
CKS32F103C8T6 Package LQFP-48 ARM Cortex-M3 72MHz Flash Memory: 64K@x8bit RAM: 20KB MCU (MCU/MPU/SOC)
there is a little more here, if interesting https://hackaday.com/2020/10/22/stm32-clones-the-good-the-bad-and-the-ugly/

[Dmitriy369856]

An attempt to update the firmware on TS100. The sting of the soldering iron does not heat up. The screen resolution does not correspond

[PhilipWhiteside]

An attempt to update the firmware on TS100. The sting of the soldering iron does not heat up. The screen resolution does not correspond

Same result for me. I have a USB power monitor which showed 0W too. With the Sequre OS it pulls 25W when heating up.

The text appears to be reversed on the display as well as scrambled, using TS100 image. Here is an example I did a "flip horizontally" on.

What I see with my eyes:

After flipping horizontally on the PC:

I tested all the IronOS options, it would only flash the TS based images, and only HEX. Flashing back to Sequre OS worked too.

File	Flashed?
SI012_V2.21.hex	Yes
TS100_EN.hex	Yes
TS80_EN.hex	Yes
TS80P_EN.hex	Yes
TS100_EN.dfu	No
TS100_EN.bin	No
Pinecilv2_EN.hex	No
Pinecil_EN.hex	No
MHP30_EN.hex	No

My Board

• Board print: SEQURE SI012 V1.4
• Board colour: Black
• Chips: Same as Dmitriy369856

USB Info

Holding (A) at boot

• Screen shows "UPDATE V6.0 [READY]" text only
• Buttons do nothing
• Mass storage is readable
  • 2.1 MB (1.6 MB free)
  • FAT (12-bit version)

[26908.823509] usb 3-4: new full-speed USB device number 6 using xhci_hcd
[26908.973592] usb 3-4: New USB device found, idVendor=0483, idProduct=5720, bcdDevice= 2.00
[26908.973603] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26908.973608] usb 3-4: Product: STM32 Mass Storage
[26908.973611] usb 3-4: Manufacturer: STMicroelectronics
[26908.973614] usb 3-4: SerialNumber: 005A7A7A4E59
[26908.977568] usb-storage 3-4:1.0: USB Mass Storage device detected
[26908.978065] scsi host1: usb-storage 3-4:1.0
[26909.988670] scsi 1:0:0:0: Direct-Access     SEQURE   UPDATE                PQ: 0 ANSI: 2
[26909.989216] sd 1:0:0:0: Attached scsi generic sg1 type 0
[26909.989848] sd 1:0:0:0: [sdb] 4096 512-byte logical blocks: (2.10 MB/2.00 MiB)
[26909.990069] sd 1:0:0:0: [sdb] Write Protect is off
[26909.990073] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[26909.990272] sd 1:0:0:0: [sdb] No Caching mode page found
[26909.990275] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[26909.997970]  sdb:
[26909.998268] sd 1:0:0:0: [sdb] Attached SCSI removable disk

Holding (B) at boot

• Screen shows "LOGO" text only
• Buttons do nothing
• Mass storage is not readable

[27020.282403] usb 3-4: USB disconnect, device number 6
[27020.299697] FAT-fs (sdb): unable to read boot sector to mark fs as dirty
[27025.915729] usb 3-4: new full-speed USB device number 7 using xhci_hcd
[27026.066253] usb 3-4: New USB device found, idVendor=0483, idProduct=5720, bcdDevice= 2.00
[27026.066264] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27026.066268] usb 3-4: Product: STM32 Mass Storage
[27026.066271] usb 3-4: Manufacturer: STMicroelectronics
[27026.066274] usb 3-4: SerialNumber: .(

[27026.068743] usb-storage 3-4:1.0: USB Mass Storage device detected
[27026.069238] scsi host1: usb-storage 3-4:1.0
[27027.076865] scsi 1:0:0:0: Direct-Access     LOGO                           PQ: 0 ANSI: 2
[27027.077434] sd 1:0:0:0: Attached scsi generic sg1 type 0
[27027.077850] sd 1:0:0:0: [sdb] 4096 512-byte logical blocks: (2.10 MB/2.00 MiB)
[27027.078083] sd 1:0:0:0: [sdb] Write Protect is off
[27027.078088] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[27027.078301] sd 1:0:0:0: [sdb] No Caching mode page found
[27027.078304] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[27027.171277]  sdb:
[27027.171726] sd 1:0:0:0: [sdb] Attached SCSI removable disk

[Dmitriy369856]

Manual how to install your logo https://sequremall.com/blogs/frontpage-blog/how-to-customize-the-boot-logo-of-si012-si012-pro
Here is mine ) useless

[mr-sm1th]

old mcu version:

[rudrakabir]

any updates on this? Has anyone installed ironos on a si012?

[TeqTinkerer]

Also interested!