Skip to content

Latest commit

 

History

History
53 lines (27 loc) · 2.65 KB

README.md

File metadata and controls

53 lines (27 loc) · 2.65 KB
Raw

Hori Real Arcade Pro N PS4 (RAP N PS4) Drop-in Replacement Board

Hori RAP N PS4

Attribution

The following text must be included in any distribution of derivatives of this board. All links must also be included.

Copyright © 2023 TheTrain

Licensed under CC BY 4.0

Changes from the original design:

  • list any changes you make here

Summary

The Hori Real Arcade Pro N PS4 (RAP N PS4) Drop-in Replacement Board is designed to be a quick and easy drop in solution for the Hori Real Arcade Pro N PS4 (RAP N PS4). Please note that this does not work as a drop in board for the PS3 or Xbox version of the RAP N and I have no current plans to make additional versions of it.

Please note that I do not consider this board to be finished. Hori uses some tricks to get their three-way sliders working so currently those are not mapped here. There may be a further revision if I can figure that out.

The Trackpad is currently mapped as a single button press assigned to a GPIO pin.

Please also note that there is no set configuration for this board and you may need to configure on your own until I poset a dedicated configuration for it. Until then please reference the source files for the pinout of the RP2040.

Given that I do not consider this board finished, please proceed at your own risk! I will not answer any questions about ordering the boards or setup, and no support will be offered on it. If you do not know how to order a board from JLCPCB with aseembly this might not be for you.

When ordering through JLCPCB you may see that one of the screw terminal sets is backwards. I am not sure why this is as it is correct in EasyEDA. Make sure to add a note about its orientation and pay the extra $0.50 to have placement and the board checked.

A STEP modle is available HERE although it is not really needed since this board directly replaces the original board.

Sales recommendations

It is not recommended to sell this board as it is not completed yet and should only be used for hobby purposes.

Donations

Donations are not necessary but always welcome! I typically use donations to try out new designs or send boards to people for testing, iterations and helping people get board setups that might not be in an economic position to get one themselves.

https://www.paypal.com/donate/?hosted_button_id=2JMTZVCGLDYC2

Revision History

v1.0

  • Initial open source design

Acknowledgments