Radxa zero 3w not receiving any packets through wlan0

[botam4]

Hello, I have tried getting support through facebook and telegram and i can say task failed succesfully, despite i had enough evidence that my hardware setup is functional the people could not help me because they dont understand how to properly debug the issue. First of all i would like to address the installation process: i downloaded the image, used balena etcher and it booted. Pressing CTRL+ALT+F1 returned me to the terminal,i resized the filsystem connecting to my network through the inbuilt wifi went fine and also got a successful ssh connection. After that i used the keygen to make a drone.key and gs.key and transfered the key to the camera. checking the wifibroadcast.cfg file on the radxa and the wfb.cfg file on the camera they were on the same channel. I also checked the majestic.yaml file and it was set on h265 . by executing the lsusb command on both groundstation and camera the groundstation shows
realtek 8812au wifi adapter and the camera doesent show a name it just shows device id 0bda:881a witch is the device id for the rtl8812au, so basically i know that both air unit and ground station have been propely connected to the module. i have also went to the etc folder of the camera after transfering the drone key and removed it using rm -rf drone.key than used the following command:
root@openipc-ssc338q:scp root@192.168.1.245:/etc/drone.key . to retry copying the new drone key to the radxa. i attach the evidence of what happened in the terminal in the screenshots. even if it were to be a broken rf frontend on the wifi adapter, its highly unlikely and it should be easy to test, the wlan boards im using are basically brand new