You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
cam link here
flash via uart+burn+tftpd - full image or separeta u-boot, uImage, rootfs.
The camera boots into openipc but only once, after resetting the power or resetting via sssh I get an "uncompress fail!" error. https://pastebin.com/eG2YL4Ex here is the bootloader firmware, after reset I get into it, after power reset it remains alive https://pastebin.com/DRFgqbEL this is the markup (after a power reset), that is, the bootloader has been flashed https://pastebin.com/JhU2DXDB here is the kernel and file firmware after the reset, it is written slowly as it should be https://pastebin.com/wF0Kpqj5 here is the download after the reset, obviously successful, via ssh it’s also included
then I unsoldered the flash drive and flashed it on the programmer, as a result the firmware began the first stage of loading, rebooted in the process (this is normal) and everything stops at the message "starting kernel", log here: https://pastebin.com/v7DYSyfg
The text was updated successfully, but these errors were encountered:
cam link here
flash via uart+burn+tftpd - full image or separeta u-boot, uImage, rootfs.
The camera boots into openipc but only once, after resetting the power or resetting via sssh I get an "uncompress fail!" error.
https://pastebin.com/eG2YL4Ex here is the bootloader firmware, after reset I get into it, after power reset it remains alive
https://pastebin.com/DRFgqbEL this is the markup (after a power reset), that is, the bootloader has been flashed
https://pastebin.com/JhU2DXDB here is the kernel and file firmware after the reset, it is written slowly as it should be
https://pastebin.com/wF0Kpqj5 here is the download after the reset, obviously successful, via ssh it’s also included
then I unsoldered the flash drive and flashed it on the programmer, as a result the firmware began the first stage of loading, rebooted in the process (this is normal) and everything stops at the message "starting kernel", log here: https://pastebin.com/v7DYSyfg
The text was updated successfully, but these errors were encountered: