Skip to content

Latest commit

 

History

History
121 lines (100 loc) · 5.77 KB

CHANGELOG.md

File metadata and controls

121 lines (100 loc) · 5.77 KB
Raw

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

[1.1.1] - 2024-03-30

Fixed

  • Bypass open hours in function get_operating_hours used the wrong entries from the dataset.

[1.1.0] - 2023-08-06

Added

  • Add function get_delay_timers.
  • Extend wtw.yaml with delay timer MQTT topics.

Fixed

  • Function get_fan_status had the wrong command in the documentation part.
  • Reformatted the code using Black.

[1.0.1] - 2023-08-05

Added

  • Add CHANGELOG.md.
  • Start releasing this project.

Fixed

  • MQTT entity naming according new requirement from Home Assistant (#28).

[1.0.0]

Added

  • Small interface change. When WTW is set to off, the level is changed to 0, which by default is a speed of 15%.
  • Save energy. Lower the ventilation speed when nobody is home.
  • Support Docker and configuration from file (#23).
  • Use a pull down menu to set the ventilation instead of using a slider.
  • Use debug_msg instead of print in function debug_data.
  • Incoming command queue (#13).
  • Validate incoming checksum (#14).
  • Update values for temperature and fan levels after update.
  • Check for incoming commands between each remote call.
  • Add incoming mqtt messages to queue to be handled in main loop.
  • Add information about voice integration.
  • Add exception handling for the sitation where incomple data is received.
  • Function set_comfort_temperature: limit the temperature range to the specification from Stork.
  • Set measurement units.
  • New screenshot.
  • Add the P# states in a folded menu.
  • Add P# state sensors.
  • Show all P# states.
  • Lovelace plugin lovelace-fold-entity-row added.
  • Always call debug_data and only show the debug data when debug_level is 1 or higher.
  • New home-assistant layout.
  • Set sleep timer to 5 seconds, since all the steps are taking longer then I like.
  • Publish return and supply air level.
  • Document how a packet is build up and do not expose the pre heating valve status from get_valve_status since it is also exposed by get_preheating_status.
  • Add frost protection information.
  • Using booleans for 'yes', 'no', 'present', 'not present', 'active', 'not active'.
  • Add function get_preheating_status.
  • Add function get_status.
  • removed debug code.
  • Add function create_packet: create a serial_command packet based on input.
  • Add function calculate_checksum: used by funcion create_packet, calculates the checksum for the serial data command.
  • Every get_ and _set function uses create_packet.
  • Function set_comfort_temperature added. Sent a message on MQTT topic house/2/attic/wtw/set_comfort_temperature with a temperature in celsius to the Comfort Temperature.
  • Function get_temp now also shows the current comfort temperature.
  • Code formatting done using Black.
  • Publish data in from functions get_valve_status and get_bypass_control.
  • Add extra funtions to get data from the WHR930.
  • Make the stdout unbufferd.
  • Function set_ventilation_level: check if an ACK is received from the WHR930 and return an 'INFO' message if we did, else return a WARNING message.
  • Add installation and configuration info.
  • Add Makefile and systemd service file.
  • Move whr930 to src dir and did a rewrite from python2 to python3.
  • Convert the input to an integer and use integers in the set_ventilation_level function.
  • Add IntakeFanActive (this is the house 'button' on the unit self) and moved the function debug_data up in the code (style).
  • Add more home-assistant integration examples and added a new screenshot.
  • Add function get_fan_status: get fan speed in RPM and percent.
  • Add function debug_data: Use this function to debug the returned data from a serial command.
  • Add function get_filter_status: get the filter status (Ok/Full).
  • Cleaned up some code.

Fixed

  • Re-add logic to set the comfort temperature. This logic was accidentally removed in the previous change.
  • Adopt configuration to MQTT changes in Home Assistant.
  • Fix debug data function for out of index if debug >1 (#22).
  • Change MQTT fan setup to be compatible with latest HomeAssistant (#20).
  • Formatted using Black.
  • Testing revealed that automation to update the slider (input_number) value could trigger a loop, there I disable it until a fix is available.
  • Do not try to debug an empty serial packet, detect an Ack and code reformating using Black.
  • Function get_status ValueError and KeyError exception handling added, (#9).
  • Warning messages are not shown anymore by default. Add exception handlers (#8).
  • Warning text in get_fan_status is now in line with the other same type warning messages (#6).
  • Function get_status type fix (#7).
  • Fix loop with slider updating automation.
  • Fix get_filter_status, the filter status is in data byte 9 (array nr: 15) instead of data byte 12 (array nr: 18) (#4).
  • Add slider to set the comfort temperature and moved the ventilition slider together with the temp slider in it's own card (#5).
  • Add input_number to set the WTW comfort temperature and Add 2 automations to set the sliders to the current value (#5).
  • Rename summermode -> summer_mode.
  • Fix image url.
  • Fix indenting in functions get_valve_status and get_bypass_control.
  • Bug fix/added serial data validation.
  • Python style fix.
  • Fix issues reported by Dick-W.
  • Function set_ventilation_level: Fetch the None if we do not get data back from the serial command.
  • Function set_ventilation_level: fix for the WARNING message.
  • Function get_fan_status: Checksum comment was wrong.
  • Function get_fan_status: Act only when data is received.
  • Function debug_data: Also print the number in the data array for data packets.
  • Move screenshot above the HA examples.
  • Rename function get_fan_status to get_ventilation_status.