-
Hi I installed a fresh new phoniebox, using the one line command and v 2.5.0 - 4101984 - master. I have rhe USB RFID reader configured from the first installation steps. When I swipe, I have the bip from the reader, but I do not see the card ID in the webinterface. Also, I do not have the latestID.txt file in the shared folder, the file does not exist. this sounds a bit weird. Any advice please? thanks! my phoniebox-rfid-reader service is up. SoftwareBase image and version2.5.0 - 4101984 Raspbian GNU/Linux 10 (buster) HardwareRaspberryPi version3B 1.2 RFID ReaderBus 001 Device 004: ID 1a86:dd01 QinHeng Electronics |
Beta Was this translation helpful? Give feedback.
Replies: 7 comments
-
What's the output of If you use Raspberry Pi OS "Bookworm", please use the command |
Beta Was this translation helpful? Give feedback.
-
please see the output here
|
Beta Was this translation helpful? Give feedback.
-
just in case this can help, I used the options 1) and then 1 in the last configuration steps (I was a bit confused and wonder if I should have used the option 0 "RFID reader RFID Reader keyboard"? Have you connected your RFID reader? [Y/n] y
|
Beta Was this translation helpful? Give feedback.
-
You could try to use the keyboard entry. Run |
Beta Was this translation helpful? Give feedback.
-
Just for clarification, did you swiped a card before retrieving the logs above? |
Beta Was this translation helpful? Give feedback.
-
This worked after choosing keyboard and a reboot!!!! :) :) :) My daughter thanks you soooo much!!! :) :) |
Beta Was this translation helpful? Give feedback.
-
Glad it worked! |
Beta Was this translation helpful? Give feedback.
You could try to use the keyboard entry.
Run
python3 ./scripts/RegisterDevice.py
to register the reader again.