-
-
Notifications
You must be signed in to change notification settings - Fork 150
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Driver Fails to Start #1062
Comments
It seems that after the last reboot you are not getting any logs anymore. Are you sure, you selected the right port? You could try with |
Looks like USB0 and USB1 are assinged to serial battery; see log at bottom. I've tried physically moving the cable to try each of the ports; I'm beginning to wonder if i have a cable issue, but it is a new generic RS232, although i also tried a another USB-RS485 but with CH343.
|
Very strange that there are no new logs. Try to reinstall the driver and reboot the GX device after. |
Results look very similar.
|
The log will be shorter If you directly set your BMS type via config.ini |
The serial starter is not starting the driver. Probably your adapter is not recognized anymore correctly. Check with Are you using a USB hub? If yes, connect the USB to serial adapter directly to a USB port. The log of the serial starter should contain this output: https://louisvdw.github.io/dbus-serialbattery/troubleshoot/#datalogserial-startercurrent |
No USB hub; I'm going to get a new cable; will take a few days. |
What is the output of |
|
Your USB to serial adapter is not recognized. That is the problem. |
Do you still need assistance? |
I have ordered a victron cable (after trying 3 different generic ones); I wont have it until the weekend. Ill let you know if i get things to work, or if i still have issues. Thx |
Describe the problem
I can't get the driver to load and connect to a USB Port.
It looks like the serial service is not starting.
Driver version
nightly build "v1.3.20240510passthrough"
Venus OS device type
Cerbo GX
Venus OS version
v3.31
BMS type
Renogy BMS
Cell count
4
Battery count
1
Connection type
Serial USB adapter to RS485
Config file
Relevant log output
Any other information that may be helpful
I tried a these driver versions as well:
I did have other Renogy batteries linked; but have unlinked them (ie removed the link cable connecting the BMS's) to just get one renogy battery to talk to the Cerbo GX.
The text was updated successfully, but these errors were encountered: