Skip to content

Latest commit

 

History

History
212 lines (149 loc) · 8.17 KB

10-Monitoring.md

File metadata and controls

212 lines (149 loc) · 8.17 KB

Monitoring

Host Check Command

The module provides a CLI command to check a host's certificate. It does so by fetching all the necessary information from this module's own database.

Usage

General: icingacli x509 check host [options]

Options:

--ip                   A hosts IP address
--host                 A hosts name
--port                 The port to check in particular
--warning              Less remaining time results in state WARNING [25%]
--critical             Less remaining time results in state CRITICAL [10%]
--allow-self-signed    Ignore if a certificate or its issuer has been self-signed

Threshold Definition

Thresholds can either be defined relative (in percent) or absolute (time interval). Time intervals consist of a digit and an accompanying unit (e.g. "3M" are three months). Supported units are:

Identifier Description
y, Y Year
M Month
d, D Day
h, H Hour
m Minute
s, S Second

Example:

$ icingacli x509 check host --host example.org --warning 1y
WARNING - *.example.org expires in 219 days|'*.example.org'=18985010s;25574400;10281600;0;102470399

Performance Data

The command outputs a performance data value for each certificate that is served by the host. The value measured is the amount of seconds remaining until the certificate expires.

check host perf data

The value of max is the total amount of seconds the certificate is valid. warning and critical are the seconds remaining after which the respective state is reported.

Icinga 2 Integration

First off, this chapter relies on the fact that you're using the Director already and that you're familiar with some of the terms and functionalities used there.

If you don't want to use the Director, know that Icinga 2 already provides an appropriate template for the host check command in its template library: https://icinga.com/docs/icinga2/latest/doc/10-icinga-template-library/#x509

Director Import Sources

The module provides two different import sources:

Hosts (X509)

Focuses on the hosts the module found when scanning the networks. Use this for the most straightforward way of integrating the results into your environment. It's also the utilized source in the example further below.

Columns provided by this source:

Name Description
host_name_or_ip Default key column. This is primarily host_name, though if this is not unique it falls back to host_ip for individual results
host_ip A host's IP address by which it is known to this module. May be IPv4 or IPv6
host_name A host's name as detected by SNI or a reverse DNS lookup during the scan process
host_ports Separated by comma. All ports where certificates were found
host_address Set to host_ip if it is IPv4 else null
host_address6 Set to host_ip if it is IPv6 else null

Services (X509)

While the hosts import source does not provide any details about the found certificates this one does. This also means that this source may generate multiple results for a single host since it focuses on the found certificates.

Use this source if you want to import service objects directly and relate them to already existing hosts by their utilized certificates. The Director's many utilities provided in this regard will again come in handy here.

Columns provided by this source:

Name Description
host_name_ip_and_port Default key column. This is a combination of host_name, host_ip and host_port in the format name/ip:port
host_ip A host's IP address by which it is known to this module. May be IPv4 or IPv6
host_name A host's name as detected by SNI or a reverse DNS lookup during the scan process
host_port A host's port where a certificate has been found
host_address Set to host_ip if it is IPv4 else null
host_address6 Set to host_ip if it is IPv6 else null
cert_subject A certificate's common name
cert_issuer The issuer's common name
cert_self_signed Whether the certificate is self-signed (y or n)
cert_trusted Whether the certificate is trusted (y or n)
cert_valid_from The certificate's start time of validity (UNIX timestamp)
cert_valid_to The certificate's end time of validity (UNIX timestamp)
cert_fingerprint The certificate's fingerprint (hex-encoded)
cert_dn The certificate's distinguished name
cert_subject_alt_name The certificate's alternative subject names (Comma separated pairs of type:name)

Service Checks With the Hosts Import Source

This example covers the setup of service checks by using a particular host template and suggests then two options utilizing service apply rules.

Preparations

Assuming the check command definition icingacli-x509 has already been imported you need to define a few data fields now:

Field name Data type
certified_ports Array
icingacli_x509_ip String
icingacli_x509_host String
icingacli_x509_port String
icingacli_x509_warning String
icingacli_x509_critical String
icingacli_x509_allow_self_signed Boolean

Then please create a new host template with a name of your choosing. We've chosen x509-host. We're also importing our base template base-host here which defines all the default properties of our hosts.

new host template

This host template also requires three data fields which are shown below.

host template fields

A service template is also needed. We chose the name x509-host-check and icingacli-x509 as check command.

new service template

The service template now requires all data fields which correspond to the check command's parameters.

service template fields

Import Source Setup

Create a new import source of type Hosts (X509).
hosts import source

Configure a property modifier for column host_ports of type Split and use the comma , as delimiter.
ports property modifier

The preview should now produce a similar result to this:
hosts import result

Sync Rule Setup

Create a new sync rule for objects of type Host. Depending on your environment you may choose either Merge or Replace as update policy. Choose Merge to continue with this example.

Which properties this rule defines is also very dependent on what you want to achieve. We now assume that you already have host objects whose object names match exactly those the import source provides. (Hence you should choose Merge as update policy)

sync rule properties

Service Check Setup

There are two choices now. The first checks a host's certificates as a single service. The second creates for each individual certificate (port) a service.

Single Service

This is done by defining a new service as part of the host template created earlier. There add a service and choose the service template also created previously.

host check single service

Once you've triggered the import and synchronisation as well as deployed the resulting changes you should see this in Icinga Web 2:

single service result

Multiple Services

This utilizes a service apply rule. Trigger the import and synchronisation first, otherwise you can't choose a custom variable for the apply for rule.

Once the synchronisation is finished, set up the service apply rule like this:

host check multiple services

After deploying the resulting changes you should see this in Icinga Web 2:

multiple services result