Skip to content

Latest commit

 

History

History
68 lines (57 loc) · 2.33 KB

blinky.md

File metadata and controls

68 lines (57 loc) · 2.33 KB
Raw

Blinky example

Introduction

This blinky example demonstrates the integration of FreeRTOS kernel and TrustedFirmware-M. The FreeRTOS application running on non-secure side uses PSA APIs to fetch the firmware framework version of TrustedFirmware-M running on the secure-side and prints it on the console. In addition, to simulate LED blinking, LED On and LED off are printed onto the console at regular intervals.

Development environment

The document describes the steps to setup the development environment. Ensure that, it is setup correctly before proceeding.

Building the application

To build the blinky example, run the following command:

./tools/scripts/build.sh blinky --target <corstone300/corstone310/corstone315> --toolchain <ARMCLANG/GNU>

Run the command below to perform a clean build:

./tools/scripts/build.sh blinky --target <corstone300/corstone310/corstone315> --toolchain <ARMCLANG/GNU> -c

Running the application

To run the blinky example, run the following command:

./tools/scripts/run.sh blinky --target <corstone300/corstone310/corstone315>

Expected output

[INF] Starting bootloader
[INF] Beginning BL2 provisioning
[WRN] TFM_DUMMY_PROVISIONING is not suitable for production! This device is NOT SECURE
[INF] Primary image: magic=good, swap_type=0x1, copy_done=0x3, image_ok=0x3
[INF] Scratch: magic=bad, swap_type=0x1, copy_done=0x2, image_ok=0x2
[INF] Boot source: primary slot
[INF] Swap type: none
[INF] Primary image: magic=good, swap_type=0x1, copy_done=0x3, image_ok=0x1
[INF] Scratch: magic=bad, swap_type=0x1, copy_done=0x2, image_ok=0x2
[INF] Boot source: primary slot
[INF] Swap type: none
[INF] Bootloader chainload address offset: 0x0
[INF] Jumping to the first image slot
[INF] Beginning TF-M provisioning
<NUL>[WRN] <NUL>TFM_DUMMY_PROVISIONING is not suitable for production! <NUL>This device is NOT SECURE<NUL>
<NUL>[Sec Thread] Secure image initializing!
<NUL>Booting TF-M v1.8.0
<NUL>Creating an empty ITS flash layout.
Creating an empty PS flash layout.
[INF][Crypto] Provisioning entropy seed... complete.
[DBG][Crypto] Initialising mbed TLS 3.4.0 as PSA Crypto backend library... complete.
psa_framework_version is: 257
LED on
LED off
LED on
LED off
LED on
LED off