[defect]: checkrad: Unknown NAS (IPv6 address), not checking #4954

fabricioviana · 2023-04-03T02:00:37Z

What type of defect/bug is this?

Unexpected behaviour (obvious or verified by project member)

How can the issue be reproduced?

Hello.
I'm having problems with checkrad script and NAS with IPv6 address. I use Freeradius with MySQL.

Authentication, authorization and accouting work normally. Radclient disconnects the user normally.

The problem occurs when it is necessary to run the verification of simultaneous users, using the checkrad script. I am having the following error message:

checkrad: Unknown NAS 2901:452:9:a::2, not checking

In the MySQL nas table is the IP 2901:452:9:a::2 (remembering that the authentications are working normally with this configuration).

(remembering that the authentications are working normally with this configuration).

If you use IPv4 as the NAS address, the checkrad works normally. The problem with checkrad only occurs when using IPv6 as the NAS address.

I compiled the latest version of FreeRadius 3.2.

Could someone help please?
Thanks

Log output from the FreeRADIUS daemon

FreeRADIUS Version 3.2.3
Copyright (C) 1999-2022 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/sqlippool
including configuration file /etc/freeradius/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/sql
including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/ddns_exec
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/digest
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/accounting
/etc/freeradius/policy.d/accounting[42]: Reference "${IDRADIUSSERVER}" not found
/etc/freeradius/policy.d/accounting[54]: Reference "${IDRADIUSSERVER}" not found
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/control
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/freeradius.env
including configuration file /etc/freeradius/ddns.env
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	postauth_client_lost = no
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	nonblock = no
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
  recv_coa {
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost_ipv6 {
 	ipv6addr = ::1
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
  	filename = "/etc/freeradius/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_sqlippool
  # Loading module "sqlippool" from file /etc/freeradius/mods-enabled/sqlippool
  sqlippool {
  	sql_module_instance = "sql"
  	lease_duration = 3600
  	pool_name = "Pool-Name"
  	default_pool = "main_pool"
  	ipv6 = yes
  	allocate_begin = "START TRANSACTION"
  	allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'"
  	allocate_clear_timeout = 1
  	allocate_existing = ""
  	allocate_requested = ""
  	allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) AND banned = 0 ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
  	allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL"
  	allocate_commit = "COMMIT"
  	pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
  	start_begin = ""
  	start_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
  	start_commit = ""
  	alive_begin = ""
  	alive_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
  	alive_commit = ""
  	stop_begin = ""
  	stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
  	stop_commit = ""
  	on_begin = ""
  	on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
  	on_commit = ""
  	off_begin = ""
  	off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
  	off_commit = ""
   messages {
   	exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
   	success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
   	clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
   	failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
   	nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
   }
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/freeradius/mods-enabled/sql
  sql {
  	driver = "rlm_sql_mysql"
  	server = "192.0.2.2"
  	port = 3306
  	login = "radius_user"
  	password = <<< secret >>>
  	radius_db = "radius"
  	read_groups = yes
  	read_profiles = yes
  	read_clients = yes
  	delete_stale_sessions = yes
  	sql_user_name = "%{User-Name}"
  	default_user_profile = ""
  	client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
  	authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
  	authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
  	authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
  	authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
  	group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
  	simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
  	simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  	auto_escape = no
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
     	query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime	= UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}' AND acctstarttime <= UTC_TIMESTAMP()"
     }
     accounting-off {
     	query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime	= UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}' AND acctstarttime <= UTC_TIMESTAMP()"
     }
     start {
     	query = "INSERT INTO radacct (acctsessionid,		acctuniqueid,		username, realm,			nasipaddress,		nasportid, nasporttype,		acctstarttime,		acctupdatetime, acctstoptime,		acctsessiontime, 	acctauthentic, connectinfo_start,	connectinfo_stop, 	acctinputoctets, acctoutputoctets,	calledstationid, 	callingstationid, acctterminatecause,	servicetype,		framedprotocol, framedipaddress, framedipv6prefix, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', UTC_TIMESTAMP(), UTC_TIMESTAMP(), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Prefix}', '%{Delegated-IPv6-Prefix}')"
     }
     interim-update {
     	query = "UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = UTC_TIMESTAMP(), acctinterval    = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', framedipv6prefix = '%{Framed-IPv6-Prefix}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctstoptime = NULL, nasportid = '%{NAS-Port-Id}', calledstationid = '%{Called-Station-Id}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' OR AcctUniqueId = '%{Segundo-AcctUnique-Id}' OR AcctUniqueId = '%{Terceiro-AcctUnique-Id}'"
     }
     stop {
     	query = "UPDATE radacct SET acctstoptime	= UTC_TIMESTAMP(), acctsessiontime	= %{%{Acct-Session-Time}:-NULL}, acctinputoctets	= '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid   = '%{Acct-Session-Id}' AND username          = '%{SQL-User-Name}' AND nasipaddress      = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}'"
     }
    }
   }
   post-auth {
   	reference = ".query"
   	query = "INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{Calling-Station-Id}')"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loading module "ddns_del" from file /etc/freeradius/mods-enabled/ddns_exec
  exec ddns_del {
  	wait = yes
  	program = "/var/scriptsradius/ddns.php del %{User-Name} %{Framed-IP-Address}"
  	input_pairs = "request"
  	shell_escape = no
  }
  # Loading module "ddns_add" from file /etc/freeradius/mods-enabled/ddns_exec
  exec ddns_add {
  	wait = yes
  	program = "/var/scriptsradius/ddns.php add %{User-Name} %{Framed-IP-Address}"
  	input_pairs = "request"
  	shell_escape = no
  }
  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  instantiate {
  }
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
  # Instantiating module "sqlippool" from file /etc/freeradius/mods-enabled/sqlippool
  # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.7.41
   mysql {
    tls {
    	tls_required = no
    	check_cert = no
    	check_cert_cn = no
    }
   	warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
   	start = 5
   	min = 3
   	max = 32
   	spare = 10
   	uses = 0
   	lifetime = 0
   	cleanup_interval = 30
   	idle_timeout = 60
   	retry_delay = 30
   	max_retries = 5
   	spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 2901:452:9:a::2 (R1.ITU) to global clients list
rlm_sql (2901:452:9:a::2): Client "R1.ITU" (sql) added
rlm_sql (sql): Released connection (0)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT". 
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
  # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 58287
Listening on proxy address :: port 39344
Ready to process requests

...

(46) Received Access-Request Id 115 from [2901:452:9:a::2]:53885 to [2601:3c13::a23c:9aa4:aa32:a133]:1812 length 187
(46)   Service-Type = Framed-User
(46)   Framed-Protocol = PPP
(46)   NAS-Port = 15784515
(46)   NAS-Port-Type = Ethernet
(46)   User-Name = "test-user"
(46)   Calling-Station-Id = "AA:AA:2F:8F:AA:BB"
(46)   Called-Station-Id = "pppoe-server-oltXX"
(46)   NAS-Port-Id = "bonding1.500-PPPoE-OLTXX"
(46)   CHAP-Challenge = 0x8f9fe5e689f9b1760b84ad54bf05cbe1
(46)   CHAP-Password = 0x014c4df3abbcc0c28f554d93b775b65e43
(46)   NAS-Identifier = "R1.ITU"
(46)   NAS-IPv6-Address = 2901:452:9:a::2
(46) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(46)   authorize {
(46)     if (Service-Type == "Login-User") {
(46)     if (Service-Type == "Login-User")  -> FALSE
(46)     if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) {
(46)     EXPAND %{Cisco-AVPair[*]}
(46)        --> 
(46)     if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/)  -> FALSE
(46)     elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
(46)     ERROR: Failed retrieving values required to evaluate condition
(46)     else {
(46)       update request {
(46)         EXPAND %{toupper:%{Calling-Station-Id}}
(46)            --> AA:AA:2F:8F:AA:BB
(46)         Calling-Station-Id := AA:AA:2F:8F:AA:BB
(46)       } # update request = noop
(46)     } # else = noop
(46)     if (!control:Cleartext-Password){
(46)     if (!control:Cleartext-Password) -> TRUE
(46)     if (!control:Cleartext-Password) {
(46)       update control {
(46)         Cleartext-Password := "no_user_found_radiusnet"
(46)       } # update control = noop
(46)     } # if (!control:Cleartext-Password) = noop
(46)     [preprocess] = ok
(46) chap:   &control:Auth-Type := CHAP
(46)     [chap] = ok
(46)     [mschap] = noop
(46) sql: EXPAND %{User-Name}
(46) sql:    --> test-user
(46) sql: SQL-User-Name set to 'test-user'
rlm_sql (sql): Reserved connection (3)
(46) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(46) sql:    --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test-user' ORDER BY id
(46) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test-user' ORDER BY id
(46) sql: User found in radcheck table
(46) sql: Conditional check items matched, merging assignment check items
(46) sql:   Cleartext-Password := "adair2800"
(46) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(46) sql:    --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test-user' ORDER BY id
(46) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test-user' ORDER BY id
(46) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(46) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'test-user' ORDER BY priority
(46) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'test-user' ORDER BY priority
(46) sql: User found in the group table
(46) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(46) sql:    --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '18' ORDER BY id
(46) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '18' ORDER BY id
(46) sql: Group "18": Conditional check items matched
(46) sql: Group "18": Merging assignment check items
(46) sql:   Simultaneous-Use := 1
(46) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(46) sql:    --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '18' ORDER BY id
(46) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '18' ORDER BY id
(46) sql: Group "18": Merging reply items
(46) sql:   Mikrotik-Rate-Limit = "206848k/206848k 0k/0k 0k/0k 0/0 5 206848k/206848k "
(46) sql:   WISPr-Bandwidth-Max-Down = 206848000
(46) sql:   WISPr-Bandwidth-Max-Up = 206848000
rlm_sql (sql): Released connection (3)
(46)     [sql] = ok
(46) pap: WARNING: Auth-Type already set.  Not setting to PAP
(46)     [pap] = noop
(46)   } # authorize = ok
(46) Found Auth-Type = CHAP
(46) # Executing group from file /etc/freeradius/sites-enabled/default
(46)   Auth-Type CHAP {
(46) chap: Comparing with "known good" Cleartext-Password
(46) chap: CHAP user "test-user" authenticated successfully
(46)     [chap] = ok
(46)     if (request:Service-Type == Login-User && !request:NAS-Port-Type && !reply:Mikrotik-Group){
(46)     if (request:Service-Type == Login-User && !request:NAS-Port-Type && !reply:Mikrotik-Group) -> FALSE
(46)     if (request:Service-Type == Login-User && request:NAS-Port-Type && reply:Mikrotik-Group){
(46)     if (request:Service-Type == Login-User && request:NAS-Port-Type && reply:Mikrotik-Group) -> FALSE
(46)     if (request:Service-Type == Framed-User && reply:Mikrotik-Group){
(46)     if (request:Service-Type == Framed-User && reply:Mikrotik-Group) -> FALSE
(46)     if (reject && Framed-Protocol == PPP) {
(46)     if (reject && Framed-Protocol == PPP)  -> FALSE
(46)     if (invalid && Framed-Protocol == PPP) {
(46)     if (invalid && Framed-Protocol == PPP)  -> FALSE
(46)   } # Auth-Type CHAP = ok
(46) # Executing section session from file /etc/freeradius/sites-enabled/default
(46)   session {
(46) sql: EXPAND %{User-Name}
(46) sql:    --> test-user
(46) sql: SQL-User-Name set to 'test-user'
rlm_sql (sql): Reserved connection (4)
(46) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(46) sql:    --> SELECT COUNT(*) FROM radacct WHERE username = 'test-user' AND acctstoptime IS NULL
(46) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'test-user' AND acctstoptime IS NULL
(46) sql: EXPAND SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(46) sql:    --> SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test-user' AND acctstoptime IS NULL
(46) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test-user' AND acctstoptime IS NULL
checkrad: Unknown NAS 2901:452:9:a::2, not checking
rlm_sql (sql): Released connection (4)
(46)     [sql] = ok
(46)   } # session = ok
(46) Using Post-Auth-Type Reject
(46) # Executing group from file /etc/freeradius/sites-enabled/default
(46)   Post-Auth-Type REJECT {
(46) sql: EXPAND .query
(46) sql:    --> .query
(46) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (0)
(46) sql: EXPAND %{User-Name}
(46) sql:    --> test-user
(46) sql: SQL-User-Name set to 'test-user'
(46) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{Calling-Station-Id}')
(46) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'test-user', '0x014c4df3abbcc0c28f554d93b775b65e43', 'Access-Reject', UTC_TIMESTAMP(), '2901:452:9:a::2', 'AA:AA:2F:8F:AA:BB')
(46) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'test-user', '0x014c4df3abbcc0c28f554d93b775b65e43', 'Access-Reject', UTC_TIMESTAMP(), '2901:452:9:a::2', 'AA:AA:2F:8F:AA:BB')
(46) sql: SQL query returned: success
(46) sql: 1 record(s) updated
rlm_sql (sql): Released connection (0)
(46)     [sql] = ok
(46) attr_filter.access_reject: EXPAND %{User-Name}
(46) attr_filter.access_reject:    --> test-user
(46) attr_filter.access_reject: Matched entry DEFAULT at line 11
(46)     [attr_filter.access_reject] = updated
(46)     policy remove_reply_message_if_eap {
(46)       if (&reply:EAP-Message && &reply:Reply-Message) {
(46)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(46)       else {
(46)         [noop] = noop
(46)       } # else = noop
(46)     } # policy remove_reply_message_if_eap = noop
(46)   } # Post-Auth-Type REJECT = updated
(46) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.

Relevant log output from client utilities

No response

Backtrace from LLDB or GDB

No response

The text was updated successfully, but these errors were encountered:

alandekok · 2023-04-03T14:51:45Z

The message Unknown NAS .., not checking is because that IP isn't listed as a RADIUS client.

Maybe you have the client tied to a virtual server? checkrad only works with global clients, which are usually defined in clients.conf.

You might try listing that IP address in clients.conf, and seeing it it helps.

fabricioviana · 2023-04-04T03:06:23Z

Hello Allan, how are you? Thanks for your reply.

I ran the following tests:

I commented out the option "read_clients = yes" inside the SQL module. This way Freeradius will no longer use the MySQL "nas" table.
I created at the end of the clients.conf file:

client test_ipv6 {
ipv6addr = 2901:452:9:a::2
secret = secret
}

Authentication, accounting and disconnection work normally. But the simultaneous connection test returns the same error:

checkrad: Unknown NAS 2901:452:9:a::2, not checking

I changed the clients.conf file to the IPv4 I have on the same router:

client test_ipv6 {
         ipaddr = 200.200.200.1
         secret = secret
}

Everything works normally.

It seems to me that the behavior is the same, both using MySQL and clients.conf: when the NAS has IPv6, the checkrad script does not recognize it.

Hope this helps
Best Regards
Fabricio

fabricioviana added the defect category: a defect or misbehaviour label Apr 3, 2023

jpereira added the v3.2.x meta: relates to the v3.2.x branch label Apr 6, 2023

AXLancelot mentioned this issue Jul 12, 2023

IPV6 test failed #5101

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[defect]: checkrad: Unknown NAS (IPv6 address), not checking #4954

[defect]: checkrad: Unknown NAS (IPv6 address), not checking #4954

fabricioviana commented Apr 3, 2023

alandekok commented Apr 3, 2023

fabricioviana commented Apr 4, 2023

[defect]: checkrad: Unknown NAS (IPv6 address), not checking #4954

[defect]: checkrad: Unknown NAS (IPv6 address), not checking #4954

Comments

fabricioviana commented Apr 3, 2023

What type of defect/bug is this?

How can the issue be reproduced?

Log output from the FreeRADIUS daemon

Relevant log output from client utilities

Backtrace from LLDB or GDB

alandekok commented Apr 3, 2023

fabricioviana commented Apr 4, 2023