Request a firmware build - 2.9.x

[pfeerick]

Ask here if you want/need specific options that are not included in the stock builds. Builds will be uploaded to here (same link as 'By request' below), so check it out before making a request just in case there is already a custom build with your chosen options...

The Language builds are automated builds based on the 2.9 branch.

Please remember to specify your transmitter when requesting a build ;)

• Language builds - zip file per transmitter containing all languages built, with some additional builds for enabling bluetooth or lua mixer scripts for some radios.
• By request

[D4RK3R2]

i need russian language in tx12

[pfeerick]

As you may have realised by now this is not possible yet, but a PR to add RU support will be merged shortly, so it will be an option for 2.10.

[KevinFairgrieve]

Not sure this is possible!!

FrSky X12S BETA MACHINE. So it has the pre production motherboard, and no GPS.

English please.

[pfeerick]

@3djc What flags do I need for the beta X12S?

[3djc]

I think we removed support for those in otx before edgetx fork (since there had been a swap program by frsky) so my guess is you cannot

[KevinFairgrieve]

Thank you for looking at this, I suspected this was the case.

If it is possible in the future I would appreciate it.

[k120189]

could i get
radiolink zorro with LUA mixers enabled?
English please

[pfeerick]

FLAVOR=zorro EXTRA_OPTIONS="-DLUA_MIXER=Y" tools/build-gh.sh

Available via the by requests link in the initial post.

[tulpek]

Can we have a build for Jumper T20 Hall Gimbals ELRS2.4G? Thank You

[pfeerick]

The Jumper T20 is not a supported radio for 2.9. Instead, you should be using the last factory firmware linked at https://edgetx.org/supportedradios/ or trying a nightly build of 2.10 if you're feeling adventurous.

[ilya-88]

Hello, can you help me assemble version 2.9 and 2 10 with External Access of the mod for the r9m long-range module from frsky for the radiomaster tx-16s. Thank you very much. when I assembled it didn’t work

[pfeerick]

Specific build for externalaccessmod is no longer necessary as of 2.9. If you have done the necessary hardware mod, instead set the AUX1 serial port to "External Module". https://manual.edgetx.org/color-radios/radio-settings/hardware#serial-port

[ilya-88]

Thank you! I didn't know how it works, now I know!

[leonardnewnham]

Hi,
Could I please have a firmware build for an X9D Plus 2019 transmitter

• with Lua enabled, and
• without helicopter support
  Many thanks!

[3djc]

Lua is enabled by default, and heli can now be hidden by settings

[leonardnewnham]

OK, thank you, re heli.
Is Lua enabled by default for mixer scripts? I upgraded from OpenTX and could not run my scripts.

[3djc]

Ok, so what you want is LUA_MIXER=Y

You can build it yourself from buddy using cloud build and adding the flag above