BoardConfig.mk

# Copyright (C) 2007 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# BoardConfig.mk
#
# Product-specific compile-time definitions.
#

# Set this up here so that BoardVendorConfig.mk can override it
BOARD_USES_GENERIC_AUDIO := false

BOARD_USES_LIBSECRIL_STUB := true

# Use the non-open-source parts, if they exist
-include vendor/samsung/ypg1/BoardConfigVendor.mk

# Processor optimizations
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_ARCH := arm
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_ARCH_VARIANT_CPU := cortex-a8
TARGET_CPU_VARIANT := cortex-a8

TARGET_NO_BOOTLOADER := true
TARGET_NO_RADIOIMAGE := true

TARGET_BOARD_PLATFORM := s5pc110
TARGET_BOARD_PLATFORM_GPU := POWERVR_SGX540_120
TARGET_BOOTLOADER_BOARD_NAME := s5pc110

# Provide our own libaudio
TARGET_PROVIDES_LIBAUDIO := true

# Releasetools
TARGET_RELEASETOOLS_EXTENSIONS := device/samsung/ypg1

# Camera defines
USE_CAMERA_STUB := false
ifeq ($(USE_CAMERA_STUB),false)
BOARD_SECOND_CAMERA_DEVICE := true
BOARD_CAMERA_LIBRARIES := libcamera
endif
ICS_CAMERA_BLOB := true

# OpenGL stuff
USE_OPENGL_RENDERER := true
BOARD_EGL_CFG := device/samsung/ypg1/prebuilt/etc/egl.cfg
BOARD_USE_SKIA_LCDTEXT := true

# Enable WEBGL in WebKit
ENABLE_WEBGL := true

# Bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_BCM := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/samsung/ypg1/bluetooth
BOARD_BLUEDROID_VENDOR_CONF := device/samsung/ypg1/bluetooth/vnd_ypg1.txt

# Video Devices
BOARD_USES_OVERLAY := true
BOARD_V4L2_DEVICE := /dev/video1
BOARD_CAMERA_DEVICE := /dev/video0
BOARD_SECOND_CAMERA_DEVICE := /dev/video2

# XXX
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 395264000

# Max image/partition sizes
# XXX: check and fix
BOARD_BOOTIMAGE_MAX_SIZE := $(call image-size-from-data-size,0x00280000)
BOARD_RECOVERYIMAGE_MAX_SIZE := $(call image-size-from-data-size,0x00500000)
BOARD_SYSTEMIMAGE_MAX_SIZE := $(call image-size-from-data-size,0x07500000)
BOARD_USERDATAIMAGE_MAX_SIZE := $(call image-size-from-data-size,0x04ac0000)
# The size of a block that can be marked bad.
BOARD_FLASH_BLOCK_SIZE := 131072

# Kernel defines
BOARD_NAND_PAGE_SIZE := 4096
BOARD_NAND_SPARE_SIZE := 128
BOARD_KERNEL_BASE := 0x32000000
BOARD_KERNEL_CMDLINE := console=ttyFIQ0,115200 init=/init
BOARD_KERNEL_PAGESIZE := 4096

# hwcomposer: custom vsync ioctl
BOARD_CUSTOM_VSYNC_IOCTL := true

# TARGET_DISABLE_TRIPLE_BUFFERING can be used to disable triple buffering
# on per target basis. On crespo it is possible to do so in theory
# to save memory, however, there are currently some limitations in the
# OpenGL ES driver that in conjunction with disable triple-buffering
# would hurt performance significantly (see b/6016711)
TARGET_DISABLE_TRIPLE_BUFFERING := false
BOARD_ALLOW_EGL_HIBERNATION := true


# Our devices uses old GPU blobs
BOARD_EGL_WORKAROUND_BUG_10194508 := true
 
# Define kernel config for inline building
TARGET_KERNEL_CONFIG := cyanogenmod_ypg1_defconfig
TARGET_KERNEL_SOURCE := kernel/samsung/aries

# WIFI defines
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
WPA_SUPPLICANT_VERSION      := VER_0_8_X
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd
BOARD_HOSTAPD_DRIVER        := NL80211
BOARD_HOSTAPD_PRIVATE_LIB   := lib_driver_cmd_bcmdhd
BOARD_WLAN_DEVICE           := bcmdhd
BOARD_WLAN_DEVICE_REV       := bcm4329
WIFI_DRIVER_MODULE_NAME     := "bcmdhd"
WIFI_DRIVER_FW_PATH_PARAM   := "/sys/module/bcmdhd/parameters/firmware_path"
WIFI_DRIVER_FW_PATH_STA     := "/vendor/firmware/fw_bcmdhd.bin"
WIFI_DRIVER_FW_PATH_AP      := "/vendor/firmware/fw_bcmdhd_apsta.bin"

# Vold
BOARD_VOLD_EMMC_SHARES_DEV_MAJOR := true
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/platform/s3c-usbgadget/gadget/lun%d/file"

# Recovery
TARGET_USERIMAGES_USE_EXT4 := true
BOARD_CUSTOM_GRAPHICS := ../../../device/samsung/ypg1/recovery/graphics.c
BOARD_HAS_NO_SELECT_BUTTON := true
BOARD_RECOVERY_HANDLES_MOUNT := true
BOARD_USES_BML_OVER_MTD := true
BOARD_CUSTOM_RECOVERY_KEYMAPPING:= ../../device/samsung/ypg1/recovery/recovery_keys.c
BOARD_CUSTOM_BOOTIMG_MK := device/samsung/ypg1/shbootimg.mk
TARGET_RECOVERY_FSTAB := device/samsung/ypg1/fstab.aries
RECOVERY_FSTAB_VERSION := 2
TARGET_OTA_ASSERT_DEVICE := YP-G1,ypg1


# Dalvik lower memory footprint
TARGET_ARCH_LOWMEM := true

# Framework sync
TARGET_RUNNING_WITHOUT_SYNC_FRAMEWORK := true

# FM Radio
BOARD_HAVE_FM_RADIO := true
BOARD_GLOBAL_CFLAGS += -DHAVE_FM_RADIO
BOARD_FM_DEVICE := si4709

# Charging mode
BOARD_CHARGING_MODE_BOOTING_LPM := /sys/class/power_supply/battery/charging_mode_booting

# Suspend in charger to disable capacitive keys
BOARD_CHARGER_ENABLE_SUSPEND := true

# Screenrecord
BOARD_SCREENRECORD_LANDSCAPE_ONLY := true

# SELinux
BOARD_SEPOLICY_DIRS := \
        device/samsung/ypg1/sepolicy

BOARD_SEPOLICY_UNION := \
        device.te \
        domain.te \
        file_contexts \
        file.te \
        geomagneticd.te \
        init.te \
        mediaserver.te \
        orientationd.te \
        pvrsrvinit.te \
        system.te \
        wpa_supplicant.te

# Hardware tunables
BOARD_HARDWARE_CLASS := device/samsung/ypg1/cmhw/