BoardConfig.mk

#
# Copyright (C) 2016 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# inherit from Oppo common
-include device/oppo/common/BoardConfigCommon.mk

PLATFORM_PATH := device/oneplus/onyx

# Assertions
TARGET_BOARD_INFO_FILE ?= $(PLATFORM_PATH)/board-info.txt

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := MSM8974
TARGET_NO_BOOTLOADER := true
TARGET_NO_RADIOIMAGE := true

# Platform
TARGET_BOARD_PLATFORM := msm8974
TARGET_BOARD_PLATFORM_GPU := qcom-adreno330

USE_CLANG_PLATFORM_BUILD := true

# Architecture
TARGET_ARCH := arm
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_CPU_VARIANT := krait

# Kernel
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_CMDLINE := androidboot.hardware=qcom user_debug=23 msm_rtb.filter=0x3b7 ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1
BOARD_KERNEL_PAGESIZE := 2048
BOARD_MKBOOTIMG_ARGS := --ramdisk_offset 0x01000000 --tags_offset 0x00000100
BOARD_KERNEL_IMAGE_NAME := zImage-dtb
TARGET_KERNEL_APPEND_DTB := true
TARGET_KERNEL_ARCH := arm
TARGET_KERNEL_CONFIG := cm_onyx_defconfig
TARGET_KERNEL_SOURCE := kernel/oneplus/onyx

# ANT+
BOARD_ANT_WIRELESS_DEVICE := "vfs-prerelease"

# Assert
TARGET_OTA_ASSERT_DEVICE := onyx,OnePlus,E1003,ONE

# Audio
AUDIO_FEATURE_ENABLED_HWDEP_CAL := true
AUDIO_FEATURE_ENABLED_LOW_LATENCY_CAPTURE := true
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
BOARD_USES_ALSA_AUDIO := true
USE_CUSTOM_AUDIO_POLICY := 1

# Bluetooth
BLUETOOTH_HCI_USE_MCT := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(PLATFORM_PATH)/bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
QCOM_BT_USE_SMD_TTY := true

# Camera
USE_DEVICE_SPECIFIC_CAMERA := true
TARGET_HAS_LEGACY_CAMERA_HAL1 := true

# Charger
BOARD_CHARGER_DISABLE_INIT_BLANK := true

# CM Hardware
BOARD_HARDWARE_CLASS += $(PLATFORM_PATH)/cmhw
TARGET_TAP_TO_WAKE_NODE := "/proc/touchpanel/double_tap_enable"

# Enable dexpreopt to speed boot time
ifeq ($(HOST_OS),linux)
  ifeq ($(call match-word-in-list,$(TARGET_BUILD_VARIANT),user),true)
    ifeq ($(WITH_DEXPREOPT_BOOT_IMG_ONLY),)
      WITH_DEXPREOPT_BOOT_IMG_ONLY := true
    endif
  endif
endif

# Filesystem
BOARD_FLASH_BLOCK_SIZE := 131072
BOARD_BOOTIMAGE_PARTITION_SIZE     := 16777216
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_CACHEIMAGE_PARTITION_SIZE    := 536870912
BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_PERSISTIMAGE_PARTITION_SIZE  := 33554432
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 16777216
BOARD_SYSTEMIMAGE_PARTITION_SIZE   := 2147483648
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_USERDATAIMAGE_PARTITION_SIZE := 12611894272
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# Workaround for factory issue
BOARD_VOLD_CRYPTFS_MIGRATE := true

# FM
TARGET_QCOM_NO_FM_FIRMWARE := true

# Fonts
EXTENDED_FONT_FOOTPRINT := true

# GPS
BOARD_VENDOR_QCOM_LOC_PDK_FEATURE_SET := true
USE_DEVICE_SPECIFIC_GPS := true
USE_DEVICE_SPECIFIC_LOC_API := true

# Graphics
HAVE_ADRENO_SOURCE := false
MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024
OVERRIDE_RS_DRIVER := libRSDriver_adreno.so
TARGET_CONTINUOUS_SPLASH_ENABLED := true
TARGET_USES_C2D_COMPOSITION := true
TARGET_USES_ION := true
USE_OPENGL_RENDERER := true
VSYNC_EVENT_PHASE_OFFSET_NS := 2500000
SF_VSYNC_EVENT_PHASE_OFFSET_NS := 0000000
TARGET_USE_COMPAT_GRALLOC_PERFORM := true

# Include path
TARGET_SPECIFIC_HEADER_PATH := $(PLATFORM_PATH)/include

# Init
TARGET_INIT_VENDOR_LIB := libinit_onyx
TARGET_RECOVERY_DEVICE_MODULES := libinit_onyx
TARGET_UNIFIED_DEVICE := true

# Keymaster
TARGET_KEYMASTER_WAIT_FOR_QSEE := true

# Lights
TARGET_PROVIDES_LIBLIGHT := true

# Protobuf-c
PROTOBUF_SUPPORTED := true

# QCOM hardware
BOARD_USES_QCOM_HARDWARE := true

# Recovery
TARGET_RECOVERY_FSTAB := $(PLATFORM_PATH)/rootdir/etc/fstab.qcom

# RIL
BOARD_PROVIDES_LIBRIL := true
TARGET_RIL_VARIANT := caf

# RPC
TARGET_NO_RPC := true

# SELinux
include device/qcom/sepolicy/sepolicy.mk

BOARD_SEPOLICY_DIRS += \
    $(PLATFORM_PATH)/sepolicy

# SnapDragon LLVM Compiler
TARGET_USE_SDCLANG := true

# Wifi
BOARD_HAS_QCOM_WLAN := true
BOARD_HAS_QCOM_WLAN_SDK := true
BOARD_WLAN_DEVICE := qcwcn
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_qcwcn
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_qcwcn
TARGET_USES_WCNSS_CTRL := true
TARGET_USES_QCOM_WCNSS_QMI := true
TARGET_USES_WCNSS_MAC_ADDR_REV := true
WIFI_DRIVER_FW_PATH_STA := "sta"
WIFI_DRIVER_FW_PATH_AP := "ap"
WPA_SUPPLICANT_VERSION := VER_0_8_X

# QCNE
BOARD_USES_QCNE := true

ifeq ($(BOARD_USES_QCNE),true)
TARGET_LDPRELOAD := libNimsWrap.so
endif

-include vendor/oneplus/onyx/BoardConfigVendor.mk