README.Rmd

---
output: github_document
bibliography: man/README/citations.bib
---

<!-- README.md is generated from README.Rmd. Please edit that file -->

```{r, echo = FALSE, message=FALSE}
knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>",
  fig.path = "man/README/README-"
)
library(fs)
library(tidyverse)
Sys.setenv(HOME = tempdir())
Sys.unsetenv("PROJECTS_FOLDER_PATH")
```

# projects

[![CRAN\_Status\_Badge](https://www.r-pkg.org/badges/version/projects)](https://cran.r-project.org/package=projects)
![CRAN\_Download\_Counter](http://cranlogs.r-pkg.org/badges/grand-total/projects)

### Authors

| Nikolas I. Krieger, M.S.;^1^ Adam T. Perzynski, Ph.D.;^2^ and Jarrod E. Dalton, Ph.D.^1,3^

| ^1^ Department of Quantitative Health Sciences, Lerner Research Institute, Cleveland Clinic, 9500 Euclid Avenue (JJN3), Cleveland, OH, 44195
| ^2^ Center for Healthcare Research and Policy, Case Western Reserve University at MetroHealth, 2500 MetroHealth Drive, Cleveland, OH 44109
| ^3^ Cleveland Clinic Lerner College of Medicine, Case Western Reserve University

| Acknowledgements:
| The authors of this package acknowledge the support provided by members of the Northeast Ohio Cohort for Atherosclerotic Risk Estimation (NEOCARE) investigative team: Claudia Coulton, Douglas Gunzler, Darcy Freedman, Neal Dawson, Michael Rothberg, David Zidar, David Kaelber, Douglas Einstadter, Alex Milinovich, Monica Webb Hooper, Kristen Hassmiller-Lich, Ye Tian (Devin), Kristen Berg, and Sandy Andrukat.

| Funding:
| This work was supported by The National Institute on Aging of the National Institutes of Health under award number R01AG055480. The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institutes of Health.

### Installation

You can install `projects` with:

```{r installation, eval = FALSE}
install.packages("projects")
```

## Introduction

The goal of the `projects` R package is to provide a set of tools that support an efficient project management workflow for statisticians and data scientists who perform reproducible research within team science environments. The `projects` package is built upon some existing tools for reproducible research, particularly RStudio, the R integrated development environment in which it dwells, and R Markdown, the file structure that allows users to assemble datasets, to perform analyses and to write manuscripts in a single file. The `projects` package is oriented towards efficient and reproducible academic research manuscript development and incorporates protocol and analysis templates based on widely-accepted reporting guidelines (viz., CONSORT and STROBE). When used on a shared file system (e.g., a server), the `projects` package provides infrastructure for collaborative research: multiple researchers can work on the same project and keep track of its progress without having to request updates.

The primary features of the projects R package are the following:

* Relational database containing details of projects, project coauthors and their affiliations, so that author details generally need to be entered only once;
* Tools for editing metadata associated with projects, authors and affiliations;
* Automated file structure supporting reproducible research workflow;
* Report templates that automatically generate title page headers, including a numbered author list and corresponding affiliations;
* Full RStudio integration via R Markdown, including customizable styling via cascading style sheets (CSS); 
* Customization, including the ability to add and to edit templates for protocols and reports, and the ability to change default project directory and file structures; and
* Organization and management functionality, including the ability to group, archive and delete projects.

At its outset, the `projects` package creates a folder called */projects* in a user-specified location. This directory will contain all research projects created and maintained by the user. The */projects* folder will also contain a relational database of the research projects and the persons who contribute to them. The database allows for users to input important metadata about the projects and authors, including stage of research and contact information. Once this higher-level folder is created, users run R functions to create projects, each of which is given its own folder. New project folders automatically include aptly named subfolders and templates in order to guide the project workflow (e.g., a "data" subfolder; a "datawork" R Markdown template). Right away, users can begin working on the research project and edit the metadata of the project itself and its authors. To lessen the burden of the mundane details of manuscript writing, the `projects` package can output lines to the console that, when copied into an R Markdown file, generates a title page with all relevant authorship information of any given project. Finally, since users may create dozens of projects over time, users can run functions to organize their projects within grouping subfolders of the main */projects* folder. 

## Conceptual Framework: Reproducible Research Workflows

Reproducibility in research is the focus of the much debated replication crisis and is therefore an increasingly central goal of the contemporary scientific process. In addition to a final report of study results, reproducible research processes include the entire workflow that the researchers used to generate those results. Actively maintaining and archiving this workflow is important to the evaluation and validation of the research. If other researchers can follow the same workflow to achieve the same results, it corroborates the results as scientific knowledge. When results are not produced by the same workflow, however, scientific knowledge is still advanced, as the workflow is shown not to yield generalizable results. [@baker20161]

There exist today widely available tools that aid with reproducible research, such as R and other statistical programming languages, that allow for precise documentation of some of the most detail-oriented portions of a project workflow. Researchers can distribute their code scripts alongside their results in order to communicate the integrity of their data processing and analysis. Unfortunately, statistical programming languages per se only contribute to research reproducibility insofar as individual statistical programmers are able (1) to use these tools effectively and (2) to integrate their own use of these tools with their collaborators' work---which may not necessarily be oriented towards reproducibility.

![](man/README/README-workflow.png)

Although researchers of different disciplines may operate in nuanced ways, there are aspects of the project workflow that are common to most investigations. First, studies are conceptualized and designed according to a protocol that details the research questions and planned analyses. Data are collected, manipulated (or "tidied") in order to make data analysis possible. The results of the analyses are compiled into a report, and ultimately an academic manuscript is drafted and submitted for wider distribution.

When navigating this workflow, researchers strive for reproducibility wherever possible, but especially during the intermediate, data-focused phases of the workflow. Readers of the final manuscript should have access to the study data in its most unrefined state possible: a frozen dataset. A frozen dataset is almost invariably a digital file or set of files that standard data analysis software can process. Whereas study data may have been initially collected in a non-digital manner, a frozen data set represents the study data's earliest state of simultaneous digitization and consolidation. From this point forward through the reporting stage, total reproducibility is expected. Thanks to modern data analysis via statistical programming languages, a reader should be able to exactly reproduce all data-derived results from the frozen data set alone. With access to the exact scripts the researchers used to produce their results, readers can scrutinize every function call performed on the frozen data set and its descendants.

The middle stage of the assumed study workflow can be performed with near perfect reproducibility, but the beginning and ending stages may not. Researchers cannot document every thought process, literature probe and informal conversation that contributes to the development of the initial study protocol, but they should strive to document it as meticulously as possible. Databases tend to be dynamic such that a given analytic data set is merely a snapshot in time. As for the final stages of project development, journals require that manuscripts adhere to specific and unique stylistic guidelines and that they be digitally submitted with file types that are not independently conducive to reproducibility (e.g., *.pdf*). For instance, even as RStudio supports the creation of submission-ready documents directly from frozen datasets, the vast majority of project teams include experts who do not use RStudio; therefore, the collaborative manuscript editing process ultimately takes place in an environment (e.g., Microsoft Word) that only supports total reproducibility with extraordinary effort. In light of these realities, researchers must do their best during manuscript creation, keeping the process in reproducible environments for as long as possible and otherwise documenting significant changes and alterations.

## The `projects` package

### Initial Setup 

All projects that the user creates with the `projects` package---as well as its infrastructure---reside in a main folder called */projects*. Users need not manually create this directory, and in fact they are encouraged not to manually manipulate any folders that the `projects` package involves. Instead, users run the function `setup_projects()`, providing the full file path of the directory in which the user wants the */projects* folder to reside.

### Metadata

Data about authors, institutional and/or department affiliations and projects are stored in *.rds* files within the main */project* directory, so that the user only needs to enter these details once (unless, for example, a co-author changes their name or affiliations). These data are also used to assemble title pages of reports, with automatically generated author lists and lists of author affiliations. We provide a complete example of this process below in the **Demonstration** section below.

The main metadata tables accessible to the user are `projects()`, `authors()` and `affiliations()`, via functions thusly named. Two additional tables are internally created to keep track of associations between authors and projects and between authors and affiliations (see the **Internal Tables** section).

#### Projects Table Columns

* `id` – an identification number, specifically an integer, unique among the other projects. This number can be used whenever needing to identify this project within `projects` package functions.
* `title` – the title of the project. A nonambiguous substring of `title` (i.e., a substring that does not match any other project) can be used whenever needing to identify this project within `projects` package functions.
* `short_title` – an optional unique nickname for the project. A nonambiguous substring of `short_title` (i.e., a substring that does not match any other project) can be used whenever needing to identify this project within `projects` package functions. This is useful if users cannot remember the long, formal project `title` nor the project `id`.
* `current_owner` – the `id` of the author who is responsible for taking action in order that work on the project may proceed further.
* `status` – a short description of the status of the project. For example, it may elaborate on the value of `current_owner` and/or `stage`.
* `deadline_type` – a simple description of the meaning of the date contained in the next field, `deadline`.
* `deadline` – a date indicating some kind of deadline whose meaning is described in the previous field, `deadline_type`.
* `stage` – one of seven predefined stages of project development that the project is currently in:
  - `c("0: idea",`
  - &nbsp;&nbsp;&nbsp;&nbsp;`"1: design",`
  - &nbsp;&nbsp;&nbsp;&nbsp;`"2: data collection",`
  - &nbsp;&nbsp;&nbsp;&nbsp;`"3: analysis",`
  - &nbsp;&nbsp;&nbsp;&nbsp;`"4: manuscript",`
  - &nbsp;&nbsp;&nbsp;&nbsp;`"5: under review",`
  - &nbsp;&nbsp;&nbsp;&nbsp;`"6: accepted")`
* `path` – the full file path where the project folder is located.
* `corresp_auth` – the `id` of the author who should be contacted for any correspondence relating to the project. This author's name will be especially marked on automatically generated title pages for this project, and his or her contact information will be especially displayed there as well in a "Corresponding Author" section.
* `creator` – the `id` of the author who initially created the project, or the value of `Sys.info()["user"]` if the author who ran `new_project()` did not enter a value.

#### Authors Table

* `id` – an identification number, specifically an integer, unique among the other authors. This number can be used whenever needing to identify this author within `projects` package functions. 
* `given_names` – the given name or names of the author. A nonambiguous substring of `given_names` (i.e., a substring that does not match any other author) can be used whenever needing to identify this author within `projects` package functions. This is included in the automatically generated title pages of the projects associated with this author.
* `last_name` – the last name or names of the author. A nonambiguous substring of `last_name` (i.e., a substring that does not match any other author) can be used whenever needing to identify this author within `projects` package functions. This is included after `given_names` in the automatically generated title pages of the projects associated with this author.
* `title` – the job title of the author.
* `degree` – the abbreviation(s) of the author's academic degree(s). This is included after `last_name` in the automatically generated title pages of the projects associated with this author.
* `email` – the email address of the author. This is included in the "Corresponding Author" section of the automatically generated title pages of projects whose `corresp_auth` field contains this author.
* `phone` – the phone number of the author. This is included in the "Corresponding Author" section of the automatically generated title pages of projects whose `corresp_auth` field contains this author.

#### Affiliations Table

* `id` – an identification number, specifically an integer, unique among the other affiliations. This number can be used whenever needing to identify this affiliation within `projects` package functions.
* `department_name` – the department name of the affiliation. A nonambiguous substring of `department_name` (i.e., a substring that does not match any other affiliation) can be used whenever needing to identify this affiliation within `projects` package functions. This is included in the affiliations section of the automatically generated title page of projects associated with authors with this affiliation. 
* `institution_name` – the name of the overall institution of the affiliation. A nonambiguous substring of `institution_name` (i.e., a substring that does not match any other affiliation) can be used whenever needing to identify this affiliation within `projects` package functions. This is included after `department_name` in the affiliations section of the automatically generated title page of projects associated with authors with this affiliation.
* `address` – the address of the affiliation. This is included after `institution_name` in the affiliations section of the automatically generated title page of projects associated with authors with this affiliation. It is also included in the "Corresponding Author" section of the title page when a project's corresponding author has this affiliation as his or her primary (i.e., first) affiliation (see the **Internal Tables** section).

#### Internal Tables

In keeping with relational database theory, there are two *.rds* files that keep track of the many-to-many relationships between projects and authors and between authors and affiliations. Each has two columns, `id1` and `id2`, that contain the `id` numbers of these items. Each row of this table describes an association. Furthermore, the `projects` package keeps track of the order in which these associations appear so that the automatically generated title pages list authors and affiliations in the correct order. Users are able to run functions to reorder these associations as needed.

### Project File Structure

Users create individual project folders with the function `new_project()`. By default, the name of each project folder is of the form p*XXXX*, where *XXXX* is the project's `id` padded with 0s on the left side. Its contents are copied from a template project folder within the *.templates* directory in the main */projects* folder.

The default project folder template is structured as follows:

- */p*XXXX
    + */data*
    + */data\_raw*
    + */figures*
    + */manuscript*
    + */progs*
        - *01\_protocol.Rmd*
        - *02\_datawork.Rmd*
        - *03\_analysis.Rmd*
        - *04\_report.Rmd*
        - *style.css*
        - *styles.docx*
        - *citations.bib*
    + *p*XXXX.*Rproj*
  
The included subfolders serve to organize the project, while the *.Rmd* files are templates that facilitate the user's workflow. The *style.css* and *styles.docx* files are a cascading style sheets (CSS) file and a Word style template, which allow for custom styling of knitted HTML files and Word documents, respectively. The *citations.bib* file is an empty BibTeX file. The default *01\_protocol.Rmd* and *04\_report.Rmd* files already reference the *.bib* and style files, easing the implementation of these features for the user.

### File Management

The goal of the `projects` package is to provide a comprehensive set of tools managing project files in a way that is self-contained in R and independent of the underlying operating system. On a daily basis, researchers make, move, copy, delete and archive files. Through the `projects` package, researchers can perform all these actions in an organized manner with an automated file structure. In fact, users are advised not to manipulate the */projects* folder and its content with their operating system, so that the package does not lose track of these files. Multiuser application of `projects` requires a server or an otherwise shared directory where multiple users can access the */projects* folder. File-managing functions---along with all functions---are demonstrated below in the **Demonstration** section.

# Demonstration

Upon installation, the `projects` package must be set up using `setup_projects()`. The user is to input the file path of the directory wherein the */projects* folder is to be located.

```{r proj_library, message=FALSE, warning=FALSE}
library(projects)
```

```{r setup_projects}
setup_projects("~")
```

As the message suggests, it is in the user's best interest to add affiliations, followed by authors and projects.

```{r affiliation1}
new_affiliation(
  department_name  = "Department of Physics",
  institution_name = "University of North Science",
  address = "314 Newton Blvd, Springfield CT 06003"
)
```

This affiliation has been successfully added to the "affiliations" table in the `projects` relational database. Now to create a few more affiliations:

```{r affiliation2, echo = TRUE}
new_affiliation(
  department_name  = "Impossibles Investigation Team",
  institution_name = "Creekshirebrook Academy of Thinks",
  address = "Let Gade 27182, 1566 Copenhagen, Denmark"
)

new_affiliation(
  department_name  = "Statistical Consulting Unit",
  institution_name = "Creekshirebrook Academy of Thinks",
  address = "196 Normal Ave, Columbus, OH ",
  id = 50
)
```

Note that we chose a specific `id` number (50) for the affiliation called the "Impossibles Investigation Team."

Now we are ready to add authors to the "authors" table of the `projects` database.

```{r authors1}
new_author(
  given_names = "Scott",
  last_name = "Bug",
  title = "Professor",
  affiliations = c(2, "Physics"),
  degree = "PhD",
  email = "scottbug@imPOSSible.net",
  phone = "965-555-5556"
)
```

Notice that in creating associations between Scott Bug and his affiliations, we were able to enter both the `id` number of one of them (2) and a substring of the `department_name` of the other ("Physics"). Also notice that the email address was coerced to be lowercase.

Now we'll add more authors.

```{r authors2, echo = TRUE}
new_author(
  given_names = "Marie",
  last_name = "Curie",
  title = "Chemist",
  affiliations = "Unit",
  phone = "553-867-5309",
  id = 86
)

new_author(
  given_names = "George Washington",
  last_name = "Carver",
  title = "Astrophysicist",
  degree = "MA, MPhil, PhD",
  affiliations = c(1, 2, 50),
  id = 1337
)

new_author(last_name = "Archimedes", title = "Mathematician")

new_author(
  last_name = "Wu",
  given_names = "Chien-Shiung",
  title = "Physicist",
  affiliations = c("of North", "Statistical Consulting"),
  degree = "PhD",
  email = "wu@WU.wU"
)
```

Now that some authors and affiliations have been created, we can view these tables:

```{r view_aa}
authors()
affiliations()
```

Now we will showcase project creation:

```{r new_project1}
new_project(
  title = "Achieving Cold Fusion",
  short_title = "ACF",
  authors = c("Bug", "Chien-Shiung", 86, 1337),
  current_owner = "Carver",
  corresp_auth = "Bug",
  stage = "1: design",
  deadline_type = "Pilot study",
  deadline = "2020-12-31"
)
```

Notice that since a `creator` was not specified, this field was populated with the value of `Sys.info()["user"]`.

Notice also that the author order given to the `authors` argument in `new_project()` command has been preserved. Also notice that Scott Bug has been marked as the corresponding author, and his contact information has been included. When knitted, this will be a proper title page.

Now a few more projects will be created:

```{r new_project2, echo = TRUE}
new_project(
  title = "Weighing the Crown",
  short_title = "Eureka!", 
  authors = "Archimedes", 
  current_owner = "Archimedes", 
  corresp_auth = "Archimedes", 
  stage = 4
)

new_project(
  title = "How I Learned to Stop Worrying and Love the Bomb",
  short_title = "Dr. Strangelove",
  authors = c("wu", 1),
  creator = "wu",
  current_owner = "George",
  corresp_auth = "George",
  stage = "under review",
  deadline_type = "2nd revision",
  deadline = "2030-10-8",
  id = 1945,
  status = "debating leadership changes",
  parent_directory = "top_secret",
  make_directories = TRUE
)

new_project(
  title = "Understanding Radon",
  short_title = "Rn86",
  authors = 86,
  creator = 86,
  corresp_auth = 86,
  stage = "3",
  status = "Safety procedures"
)
```

Here is the list of all projects that have been created:

```{r projects_list}
projects()
```

Projects, authors, and affiliations can all be edited with their respective `edit_*()` functions. For example, we can add to and remove affiliations from an author with:

```{r add_affil}
edit_author(author = "Bug", affiliations = ~ + 50 - impossibles)
```

When adding or removing affiliations/authors from an author/project, a one-sided `formula` is used: it must begin with a tilde `~`, and elements are added with `+` and removed with `-`. Elements can be referred to by their `id` numbers or their names, as described above.

A formula is also used in the `authors` argument in `edit_project()`:

```{r edit_project}
edit_project(
  "Cold",
  title = "Cold Fusion Is Actually Impossible",
  authors = ~ "archi",
  stage = "accepted"
)
```

Here, the `title` and `stage` of the project have also been edited.

Note that the default behavior when adding elements is to place them before the last author (unless there was only one author). This occurs **after** elements are removed, as specified by any minus signs (`-`) in the `formula`.

The `reorder_authors()` function allows for the user to change author order:

```{r reorder_authors}
reorder_authors(project = "Cold Fusion", "George", "Bug", 86)
```

Author order matters when obtaining title page YAML text to paste into a protocol or manuscript *.Rmd* file. Best practice is to do so late in the writing process, if, for example, the name of an affiliation changes in the middle of a research project:

```{r edit_affil, echo = TRUE}
edit_affiliation(
  affiliation     = "Impossibles",
  department_name = "Pseudoscience Debunking Unit"
)
```

The text to be pasted in the YAML can be obtained for any given project using `header()`:

```{r reprint_header, comment=NA}
header(project = "Cold")
```

In order to organize projects, users can create subdirectories within the main */projects* folder where individual project folders can dwell. Among the examples above, this has already occurred with the project with the nickname (i.e., `short_title`) "Dr. Strangelove" because on its creation the arguments `path = top_secret` and `make_directories = TRUE` were included. The latter argument must be `TRUE` if the desired path does not already exist. Observe the `path` column among the existing projects (including the `path` column in `projects()` output requires the argument `verbose = TRUE`):

```{r projects_path_demo}
projects(verbose = TRUE) %>% select(id, short_title, path)
```

Users can also create subdirectories with the function `new_project_group()`:

```{r new_proj_group}
new_project_group("Greek_studies/ancient_studies")
```

If a project has already been created, it can be moved **not** with `edit_project()` but `move_project()`. Users can also copy projects using `copy_project()`; everything in the copy will be the same except its `id`, folder name (which, again, is based on its `id`), `path` (which, again, is based on its folder name), and the name of its *.Rproj* file (which has the same name as the folder name).

```{r move_proj, echo=TRUE}
move_project("Crown", path = "Greek_studies/ancient_studies")

copy_project(
  project_to_copy = "Radon",
  path = "dangerous_studies/radioactive_studies/radon_studies", 
  make_directories = TRUE
)
```

```{r view_crown_radon}
projects(c("Crown", "Radon"), verbose = TRUE) %>% select(id, title, path)
```

Projects can also be archived; they are moved into a subdirectory called */archive* that is at the same level as the project folder (*/p*XXXX) before it was run. If this */archive* folder does not exist, it will be created.

```{r archive}
archive_project("Strangelove")
```

When a project is archived, it is no longer included in `projects()` output unless the user sets `archived = TRUE`.

```{r show_no_archived_projects}
projects(verbose = TRUE) %>% select(id, short_title, path)

projects(verbose = TRUE, archived = TRUE) %>% select(id, short_title, path)
```

Lastly, affiliations, authors and projects can be deleted with the `delete_*()` functions. Deleting an author is complete: doing so removes the author from the `creator`, `current_owner` and `corresp_auth` fields of all projects. Furthermore, deleting a project also deletes the entire project folder. Use the `delete_*()` functions with caution.

```{r deleting things}
delete_affiliation("north science")
delete_author(2)
delete_project("Crown")
```


# Conclusions

The `projects` package provides a comprehensive set of tools for reproducible team science workflows. Efficiency in project management, including manuscript development, is facilitated by an internal database that keeps record of project details as well as team members' affiliations and contact information. For manuscripts, title pages are automatically generated from this database, and a selection of manuscript outlines compliant with reporting guidelines are available in R Markdown format. We believe that the `projects` package may be useful for teams that manage multiple collaborative research projects in various stages of development.


# References