eem_configdiff_to_spark

EEM: Config Diff to Cisco Spark

An EEM+Python policy that pushes config change diffs to Spark.

Setup

This script requires the IOS-XE guestshell feature. To enable guestshell, configure:

iox

Then type the following in EXEC mode:

guestshell enable

Guestshell may not include the needed requests module. Enter guestshell with the following command:

guestshell

From the guestshell prompt, run the following command:

sudo pip install requests

If this returns an error about not being able to establish a connection to download the module, you may need to update your DNS settings within guestshell. If you know your DNS server, you can use that address. If you don't, just use 8.8.8.8. Run the command:

sudo echo 'nameserver DNSSERVER' > /etc/resolv.conf

Where DNSSERVER is the IP address of your DNS server (or 8.8.8.8). After doing that, repeat the pip command, and it should install successfully. If pip tells you requests is already installed, then your guestshell environment is good. You can type exit to return to IOS-XE.

NOTE The guestshell environment will persist across reboots. It will not revert to the default state unless you do a guestshell destory followed by another guestshell enable.

Next, define the following EEM environment. Be sure NOT to put quotes around the variable values:

• spark_token : Bearer token for your Spark user/bot

• spark_room : Spark room name to which messages will be sent

  event manager environment spark_token Bearer 1234abd...
  event manager environment spark_room Network Operators
  

Once the environment variables have been defined, copy the script to the EEM user policy directory. If you have not defined an EEM user policy directory yet, a good choice is to create a directory called flash:/policies in which to store EEM policies. Once the directory has been created, configure:

event manager directory user policy flash:policies

Once your policy has been copied into that directory, register it with the following command:

event manager policy sl_config_diff_to_spark.py

Once configuration changes start to happen, check your specified Spark room for updates.