Ardupilot v4.5.1 Batt4 Percentage Issue

[WaqasRauf]

Bug report

Issue details

I've updated arduplane from v4.4.4 to v4.5.1, after the update my reventec fuel level sensor is not giving fuel percentage, I've checked voltages they are accurate but somehow ardupilot is unable to translate these voltages to percentage. My fuel sensor is connected on batt4. I've set the parameters as described in ardupilot wiki, I've checked the integration again by downgrading the version to 4.4.4 it's working properly but on 4.5.1 it's percentage is not accurate it's giving -1 in the batt4 percentage parameter.

Version
Arduplane v4.5.1

Platform
Plane

Airframe type
Quad plane (X)

Hardware type
CUAV X7+ Pro

Logs

[IamPete1]

Please can you provide a log or parameter set. Which physical pin is the sensor connected to?

[WaqasRauf]

Dear Peter, Please find the attached dataflash log file. The Reventec Fuel Level Sensor (LS300-225) is connected on Pin 18 and it is configured on BAT4, You can see in the logs battery voltages are there but there is no percentage. Regards, Waqas 00000044.BIN <https://drive.google.com/file/d/1K88H4qcuiDuArMT89GMEEWjSQHSF0sY4/view?usp=drive_web>

…

On Wed, 8 May 2024 at 23:01, Peter Hall ***@***.***> wrote: Please can you provide a log or parameter set. Which physical pin is the sensor connected to? — Reply to this email directly, view it on GitHub <#27017 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMSK7CY6TGQXCQ2KI4AP3D3ZBJ777AVCNFSM6AAAAABHMNO532VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBRGMZTAMZVG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[IamPete1]

Fix here: #27099