You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
The first link has the correct beacon mounting height whereas the second link changes the mounting height of the beacon causing nozzle crashes. I think there should be a second version in the STLs where the original mounting height of the beacon is included for rapido users.
The text was updated successfully, but these errors were encountered:
The 3rd revision of the mount had a change in the mounting height of the beacon causing the rapido nozzle to crash into the bed. Compare these two links with the same rev3 label:
https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/blob/17229e6174104a9cb21d33a0cb7ea2c23882a710/Printers/Non_Annex_Printers/VORON_Printers/VORON_V2dot4/annex_dev-stealthburner_beacon_x_carriage/STLs/x_carriage_right_x1_rev3.stl
https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/blob/4cb96361011dc72d3039e8c95225dbc5614b5aa5/Printers/Non_Annex_Printers/VORON_Printers/VORON_V2dot4/annex_dev-stealthburner_beacon_x_carriage/STLs/x_carriage_x1_rev3.STL
The first link has the correct beacon mounting height whereas the second link changes the mounting height of the beacon causing nozzle crashes. I think there should be a second version in the STLs where the original mounting height of the beacon is included for rapido users.
The text was updated successfully, but these errors were encountered: