Flickering on 6th segment on WS2805 BTF strip after 30 brightness

[LydellMoore]

What happened?

I've noted on my setup and testing with B2 and WS2805 strips from BTF that any brighter than 30 brightness there is distinct flickering on the 6th segment on multiple cut strips (all 7 segments long) but NOT on strips that are 6 segments long. I've run the strip[s in multiple series (ie different series of 6/7 segment strips( and this always affects the 7 segments but starts to affect the 6 segment (on segment 5 aka one before the end) when 80% bright on any effect.

To Reproduce Bug

Turn strips up over 30 brightness in any effect setting.

Expected Behavior

no flickering at all

Install Method

Binary from WLED.me

What version of WLED?

WLED V .15.0-b2

Which microcontroller/board are you seeing the problem on?

ESP32

Relevant log/trace output

No response

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct

[sansillusion]

Sounds like a possible power delivery issue. I might be wrong but I would make sure the strips are getting enough amperage/voltage to run reliably.

…

On Mon, Apr 8, 2024, 4:17 p.m. Lydell Moore ***@***.***> wrote: What happened? I've noted on my setup and testing with B2 and WS2805 strips from BTF that any brighter than 30 brightness there is distinct flickering on the 6th segment on multiple cut strips (all 7 segments long) but NOT on strips that are 6 segments long. I've run the strip[s in multiple series (ie different series of 6/7 segment strips( and this always affects the 7 segments but starts to affect the 6 segment (on segment 5 aka one before the end) when 80% bright on any effect. To Reproduce Bug Turn strips up over 30 brightness in any effect setting. Expected Behavior no flickering at all Install Method Binary from WLED.me What version of WLED? WLED V .15.0-b2 Which microcontroller/board are you seeing the problem on? ESP32 Relevant log/trace output *No response* Anything else? *No response* Code of Conduct - I agree to follow this project's Code of Conduct — Reply to this email directly, view it on GitHub <#3891>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHBFDCVOMFCY3OJ5MAP3FPTY4L3OFAVCNFSM6AAAAABF5KX4HOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGIZTEMBQHE2DKNY> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[blazoncek]

@LydellMoore please use WLED forum or Discord for help and support questions.
Please also consult KB.