Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

can't run in raspberrypi 3B+ #862

Closed
ghost opened this issue Jun 29, 2019 · 3 comments
Closed

can't run in raspberrypi 3B+ #862

ghost opened this issue Jun 29, 2019 · 3 comments

Comments

@ghost
Copy link

ghost commented Jun 29, 2019

I install adguardhome on 3b+,after set up,always appear that"Error: control/version.json | Network Error",and then the web can't open anymore

@mmotti
Copy link

mmotti commented Jun 29, 2019

I don't mean to discredit this issue but it works on my 3b running Raspbian Stretch or Buster - So it's not an issue across the board

@ghost
Copy link

ghost commented Jun 30, 2019

Also running fine on my 3 B+.

The error seems that AdGuard Home can't connect to the Internet. Does your 3 B+ have an active internet connection? If you run this command below, does Raspbian successfully download and check for updates?

sudo apt-get update && sudo apt-get upgrade && sudo apt-get dist-upgrade

Also if you are coming from a Pi-hole installation, you will need to remove the settings left over.

sudo nano /etc/dhcpcd.conf and remove the static DNS set (usually at bottom of file).
You also need to sudo nano /etc/systemd/resolved.conf and remove any entries and comment out DNSStubListener=yes so it is #DNSStubListener=yes so it's back to default.

A surefire way to get things back to normal is running the following cmds:

sudo apt-get remove --purge resolvconf && sudo apt-get install resolvconf 
sudo resolvconf -u
sudo reboot

If you have time, I would fresh install Raspbian again and install AdGuard Home. Check that your Pi is getting an active working internet connection as well.

@stale
Copy link

stale bot commented Aug 30, 2019

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

@stale stale bot added the wontfix label Aug 30, 2019
@stale stale bot closed this as completed Sep 6, 2019
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

No branches or pull requests

2 participants