[ESP8266] Can other pins be used instead of D1/D2 for dscClockPin/dscReadPin? #293
-
|
I'm not sure if the D1/D2 pins are working correctly on my NodeMcu, I tried the Pushover file, I receive the Initializing and Connected push notifications but nothing else. I was wondering if I could change the pins to test. I tried changing D1/D2 for D3/D4 and D5/D6 but I get nothing more than the two previously mentioned push notifications... |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 2 replies
-
|
My issue was that I'm using a PC1555 and the voltage is not ~12v but more like ~7-9v so I had to use 15k resistors instead of the 33k. |
Beta Was this translation helpful? Give feedback.
-
|
Not really an answer since I'm still using D1/D2 but marking as solved. |
Beta Was this translation helpful? Give feedback.
-
|
I use D6 and D7 and everything work perfect |
Beta Was this translation helpful? Give feedback.
My issue was that I'm using a PC1555 and the voltage is not ~12v but more like ~7-9v so I had to use 15k resistors instead of the 33k.