Skip to content

Latest commit

 

History

History
34 lines (20 loc) · 2.57 KB

firewalls.md

File metadata and controls

34 lines (20 loc) · 2.57 KB

AlgoVPN and Firewalls

Your AlgoVPN requires properly configured firewalls. The key points to know are:

  • If you deploy to a cloud provider all firewall configuration will done automatically.

  • If you perform a local installation on an existing server you are responsible for configuring any external firewalls. You must also take care not to interfere with the server firewall configuration of the AlgoVPN.

The Two Types of Firewall

Firewall Illustration

Server Firewall

During installation Algo configures the Linux Netfilter firewall on the server. The rules added are required for AlgoVPN to work properly. The package netfilter-persistent is used to load the IPv4 and IPv6 rules files that Algo generates and stores in /etc/iptables. The rules for IPv6 are only generated if the server appears to be properly configured for IPv6. The use of conflicting firewall packages on the server such as ufw will likely break AlgoVPN.

External Firewall

Most cloud service providers offer a firewall that sits between the Internet and your AlgoVPN. With some providers (such as EC2, Lightsail, and GCE) this firewall is required and is configured by Algo during a cloud deployment. If the firewall is not required by the provider then Algo does not configure it.

External firewalls are not configured when performing a local installation, even when using a server from a cloud service provider.

Any external firewall must be configured to pass the following incoming ports over IPv4 :

Port Protocol Description Related variables in config.cfg
4160 TCP Secure Shell (SSH) ssh_port (cloud only; for local port remains 22)
500 UDP IPsec IKEv2 ipsec_enabled
4500 UDP IPsec NAT-T ipsec_enabled
51820 UDP WireGuard wireguard_enabled, wireguard_port

If you have chosen to disable either IPsec or WireGuard in config.cfg before running ./algo then the corresponding ports don't need to pass through the firewall. SSH is used when performing a cloud deployment and when subsequently modifying the list of VPN users by running ./algo update-users.

Even when not required by the cloud service provider, you still might wish to use an external firewall to limit SSH access to your AlgoVPN to connections from certain IP addresses, or perhaps to block SSH access altogether if you don't need it. Every service provider firewall is different so refer to the provider's documentation for more information.