This repository is for learning NodeMCU (ESP8266).

This repository focuses on the IDEA LAB for 1st and 2nd semester students using SST-IoT-Board. Feel free to open PR's

A project that logs data from sofar solar inverter and sends the data to blynk server using RS485 modbus interface.

Here are the Programs that can be done on a SST IoT Node MCU ESP8266 Board.

ISR-based projects demonstrate how to use ESP8266TimerInterrupt, ESP32TimerInterrupt and TimerInterrupt Library

✨ Node.js Client for Blynk (Legacy) Mobile App Protocol

Tools for working with Blynk IoT Platform

Simple WiFiManager for Blynk and ESP32 with or without SSL, configuration data saved in either SPIFFS or EEPROM. Enable inclusion of both ESP32 Blynk BT/BLE and WiFi libraries. Then select one at reboot or run both. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM. Using AsyncWebServer …

Blynk ESP8266 (NodeMCU) Program for PZEM 004T v3.0 Power Meter.

Home Automation based on Blynk server using Raspberry Pi and Relay, Lamp & PIR Sensor. The User will be able to turn on/off a Lamp or any end appliance connected to the Relay with the click of a button on a Smartphone application at will.

Arduino project for the ESP8266 -- NFC door locks

Smart cradle using ESP8266, PIR sensor, wet sensor, Mic Sensor and Servo Motor

The purpose of this project was to develop an ATM surveillance system that detects if a person's identity is obscured. This project is currently in development and not yet complete.

Controlling the lights in your house using your voice is a great way to dip your toes into the smart homeworld. And if you already have a smartphone you can build your own smart switch using a few bucks.

Remote control an Air Conditioner (Toshiba in this case) with an ESP8266 board (WeMos D1 mini) and Blynk app.

IoT-based Pulse and Blood-oxygen Monitoring System, which will allow doctors to monitor the Pulse and Blood-oxygen level of quarantined/remote patients through the Blynk IoT App.

Electronics Lab Project using Arduino, IOT and necessary sensors

This GitHub repository contains my cloud connectivity code for IoT devices and applications. It focuses on establishing secure and efficient communication between IoT devices and the IoT cloud network. The code aims to optimize real-time operations, data processing, and storage within the IoT cloud infrastructure.

💡 This project proposes an IoT based fall detection and rescue system. The main objective here is to alert the user as well as a guardian/ doctor if there is a possibility of fall.