compiler_options.md

Compiler options

tl supports some compiler options. These can either be specified on the command line or inside a tlconfig.lua file.

Project configuration

When running tl, the compiler will try to read the compilation options from a file called tlconfig.lua inside the current working directory.

Here is an example of a tlconfig.lua file:

return {
    include_dir = {
        "folder1/",
        "folder2/"
    },
}

List of compiler options

Command line option	Config key	Type	Relevant Commands	Description
-l --require		{string}	run	Require a module prior to executing the script. This is similar in behavior to the -l flag in the Lua interpreter.
-I --include-dir	include_dir	{string}	build check gen run	Prepend this directory to the module search path.
--gen-compat	gen_compat	string	build gen run	Generate compatibility code for targeting different Lua VM versions. See below for details.
--gen-target	gen_target	string	build gen run	Minimum targeted Lua version for generated code. Options are 5.1, 5.3 and 5.4. See below for details.
	include	{string}	build	The set of files to compile/check. See below for details on patterns.
	exclude	{string}	build	The set of files to exclude. See below for details on patterns.
--keep-hashbang			gen	Preserve hashbang line (#!) at the top of file if present.
-s --source-dir	source_dir	string	build	Set the directory to be searched for files. build will compile every .tl file in every subdirectory by default.
-b --build-dir	build_dir	string	build	Set the directory for generated files, mimicking the file structure of the source files.
	files	{string}	build	The names of files to be compiled. Does not accept patterns like include.
-p --pretend			build gen	Don't compile/write to any files, but type check and log what files would be written to.
--wdisable	disable_warnings	{string}	build check run	Disable the given warnings.
--werror	warning_error	{string}	build check run	Promote the given warnings to errors.
--run-build-script	run_build_script	boolean	run check gen	Runs the build script as if tl build was being run
	build_file_output_dir	string	run check gen build	Folder where the generated files from the build script will be accessible in
	internal_compiler_output	string	run check gen build	Folder to store cache files for use by the compiler
--global-env-def	global_env_def	string	build check gen run	Specify a definition module declaring any custom globals predefined in your Lua environment. See the declaration files page for details.

Generated code

Teal is a Lua dialect that most closely resembles Lua 5.3-5.4, but it is able to target Lua 5.1 (including LuaJIT) and Lua 5.2 as well. The compiler attempts to produce code that, given an input .tl file, generates the same behavior on various Lua versions.

However, there are limitations in the portability across Lua versions, and the options --gen-target and --gen-compat give you some control over the generated code.

Target version

The configuration option gen_target (--gen-target in the CLI) allow you to choose what is the minimum Lua version you want to target. Valid options are 5.1 (for Lua 5.1 and above, including LuaJIT) and 5.3 for Lua 5.3 and above.

Using 5.1, Teal will generate compatibility code for the integer division operator, a compatibility forward declaration for table.unpack and will use the bit32 library for bitwise operators.

Using 5.3, Teal will generate code using the native // and bitwise operators.

The option 5.4 is equivalent to 5.3, but it also allows using the <close> variable annotation. Since that is incompatible with other Lua versions, using this option requires using --gen-compat=off.

Code generated with --gen-target=5.1 will still run on Lua 5.3+, but not optimally: the native Lua 5.3+ operators have better performance and better precision. For example, if you are targeting Lua 5.1, the Teal code x // y will generate math.floor(x / y) instead.

If you do not use these options, the Teal compiler will infer a default target implicitly.

Which Lua version does the Teal compiler target by default?

If set explicitly via the --gen-target flag of the tl CLI (or the equivalent options in the programmatic API), the generated code will target the Lua version requested: 5.1, 5.3 or 5.4.

If the code generation target is not set explicitly via --gen-target, Teal will target the Lua version most compatible with the version of the Lua VM under which the compiler itself is running. For example, if running under something that reports _VERSION as "Lua 5.1" or "Lua 5.2" (such as LuaJIT), it will generate 5.1-compatible code. If running under Lua 5.3 or greater, it will output code that uses 5.3 extensions.

The stand-alone tl binaries are built using Lua 5.4, so they default to generating 5.3-compatible code. If you install tl using LuaRocks, the CLI will use the Lua version you use with LuaRocks, so it will default to that Lua's version.

If you require the tl Lua module and use the tl.loader(), it will do the implicit version selection, picking the right choice based on the Lua version you're running it on.

Compatibility wrappers

Another source of incompatibility across Lua versions is the standard library. This is mostly fixable via compatibility wrappers, implemented by the compat53 Lua library.

Teal's own standard library definition as used by its type checker most closely resembles that of Lua 5.3+, and the compiler's code generator can generate code that uses compat53 in order to produce consistent behavior across Lua versions, at the cost of adding a dependency when running on older Lua versions. For Lua 5.3 and above, compat53 is never needed.

To avoid forcing a dependency on Teal users running Lua 5.1, 5.2 or LuaJIT, especially those who take care to avoid incompatibilities in the Lua standard library and hence wouldn't need compat53 in their code, Teal offers three modes of operation for compatibility wrapper generation via the gen_compat flag (and --gen-compat CLI option):

• off - you can choose to disable generating compatibility code entirely. When type checking, Teal will still assume the standard library is 5.3-compatible. If you run the Teal module on an older Lua version and use any functionality from the standard library that is not available on that version, you will get a runtime error, similar to trying to run Lua 5.3 code on an older version.
• optional (default) - Teal will generate compatibility code which initializes the the compat53 library wrapping require with a pcall, so that it doesn't produce a failure if the library is missing. This means that, if compat53 is installed, you'll get the compliant standard library behavior when running on Lua 5.2 and below, but if compat53 is missing, you'll get the same behavior as described for off above.
• required - Teal will generate compatibility code which initializes compat53 with a plain require, meaning that you'll get a runtime error when loading the generated module from Lua if compat53 is missing. You can use this option if you are distributing the generated Lua code for users running different Lua versions and you want to ensure that your Teal code behaves the same way on all Lua versions, even if at the cost of an additional dependency.

Global environment definition

To make the Teal compiler aware of global variables in your execution environment, you may pass a declaration module to the compiler using the --global-env-def flag in the CLI or the global_env_def string in tlconfig.lua.

For more information, see the declaration files page.

Include/Exclude patterns

The include and exclude fields can have glob-like patterns in them:

• *: Matches any number of characters (excluding directory separators)
• **/: Matches any number subdirectories

In addition

• setting the source_dir has the effect of prepending source_dir to all patterns.
• currently, include will only include .tl files even if the extension isn't specified

For example: If our project was laid out as such:

tlconfig.lua
src/
| foo/
| | bar.tl
| | baz.tl
| bar/
| | a/
| | | foo.tl
| | b/
| | | foo.tl

and our tlconfig.lua contained the following:

return {
   source_dir = "src",
   build_dir = "build",
   include = {
      "foo/*.tl",
      "bar/**/*.tl"
   },
   exclude = {
      "foo/bar.tl"
   }
}

Running tl build -p will type check the included files and show what would be written to. Running tl build will produce the following files.

tlconfig.lua
src/
| foo/
| | bar.tl
| | baz.tl
| bar/
| | a/
| | | foo.tl
| | b/
| | | foo.tl
build/
| foo/
| | baz.lua
| bar/
| | a/
| | | foo.lua
| | b/
| | | foo.lua

Additionally, complex patterns can be used for whatever convoluted file structure we need.

return {
   include = {
      "foo/**/bar/**/baz/**/*.tl"
   }
}

This will compile any .tl file with a sequential foo, bar, and baz directory in its path.