-
Notifications
You must be signed in to change notification settings - Fork 62
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Devel branch problem with recordings #87
Comments
One more thing, if I take out the VHF and leave just one : sdr-sdr-scanner-1 | [2023-11-12 14:00:10.567674] [info ] [Scanner ] average samples time: 63.99 ms |
I already solved the broken sound , I had to reduce the grouping size from 10000Hz to 1000Hz, it was hitting the frequency wrong , this solved the problem with the broken wav. But still the problem persists with multiple freq range on one sdr device. |
Hey, thanks for the great work. I have a problem here, I have one SDR running with frequencies:
frequency range start: 152.000 kHz, stop: 154.000 kHz, sample rate: 002.048 kHz, fft: 0
frequency range start: 446.000 kHz, stop: 448.000 kHz, sample rate: 002.048 kHz, fft: 0
Spectrograms are generated , but when there is a broadcast, they are drawn on the spectrogram, but no wav is created with the recording. And after 8 minutes it completely stops generating spectrograms and even after restart it doesn't continue writing spectrograms. it just gets stuck.
Here is my log: https://pastebin.com/mRXbraFH
thank you very much!
The text was updated successfully, but these errors were encountered: