README.md

Rostock MAX v2 3D Printer by SeeMeCNC

A hybrid design between the Rostock MAX build volume and Orion delta shape and overall design.

Larger build volume than Orion Delta (similar to Rostock MAX) but much faster assembly and stiffer frame###

Build volume is appx. 11" diameter by 14+" tall.

Visit seemecnc.com for documentation under the menu tab SUPPORT > ARCHIVE

Specs:

Overall machine size - 20" diameter by 40" tall (including spool mounted on top)

Power Supply - 450w ATX PSU (12v 20+amps)

Heated Bed - Onyx (same as Rostock MAX)

Electronics - RAMBo by UltiMachine

Filament - 1.75mm ABS/PLA/HIPS/Taulman Nylon/T-Glase/other Anything withe less than 240c printing temps

HotEnd - SeeMeCNC 1.75mm bowden

Extruder - EZStruder set up as bowden drive

Human/Machine interface - LCD control with onboard SD card

Frame material - HP Melamine laminate

These files are distributed openly without warranty, as is/where is under the GPL liscense from previous inspirational designs such as the Rostock by Johann. The EZ Struder was inspired by whosawhatsis as well as sgraber's i3 extruders.