Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

pi-blaster crashes when started on 64 bit systems #122

Open
szampardi opened this issue Oct 27, 2023 · 10 comments
Open

pi-blaster crashes when started on 64 bit systems #122

szampardi opened this issue Oct 27, 2023 · 10 comments

Comments

@szampardi
Copy link

pretty much same as #119, only I'm on a fresh install of archlinuxarm on a pi zero 2w

PWM

Starting program: /usr/bin/pi-blaster -g12,13 -f
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
MBox Board Revision: 0x902120
DMA Channels Info: 0x7ff5, using DMA Channel: 14
Using hardware:                   PWM
Number of channels:                 2
PWM frequency:                 100 Hz
PWM steps:                       1000
Maximum period (100  %):      10000us
Minimum period (0.100%):         10us
DMA Base:                  0x20007000

Program received signal SIGBUS, Bus error.
0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6

PCM

Starting program: /usr/bin/pi-blaster -g12,13 -f -p
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
MBox Board Revision: 0x902120
DMA Channels Info: 0x7ff5, using DMA Channel: 14
Using hardware:                   PCM
Number of channels:                 2
PWM frequency:                 100 Hz
PWM steps:                       1000
Maximum period (100  %):      10000us
Minimum period (0.100%):         10us
DMA Base:                  0x20007000

Program received signal SIGBUS, Bus error.
0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6

PWM enabled in /boot/config.txt with dtoverlay=pwm-2chan,pin=12,func=4,pin2=13,func2=4
@szampardi
Copy link
Author

Linux alarm 6.1.58-2-rpi-ARCH #1 SMP PREEMPT Fri Oct 20 14:01:47 MDT 2023 aarch64 GNU/Linux

@sarfata
Copy link
Owner

sarfata commented Oct 28, 2023

Thanks for firing up GDB and looking into this.

When it crashes, can you type bt to see what it was doing before the crash?

@szampardi
Copy link
Author

PWM

Reading symbols from pi-blaster...
(gdb) r
Starting program: /usr/bin/pi-blaster -f -g 18,19
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
MBox Board Revision: 0x902120
DMA Channels Info: 0x7ff5, using DMA Channel: 14
Using hardware:                   PWM
Number of channels:                 2
PWM frequency:                 100 Hz
PWM steps:                       1000
Maximum period (100  %):      10000us
Minimum period (0.100%):         10us
DMA Base:                  0x20007000

Program received signal SIGBUS, Bus error.
0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6
(gdb) bt
#0  0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6
#1  0x00000055555522bc in init_ctrl_data ()
#2  0x0000005555553348 in main ()
(gdb)

PCM

Reading symbols from pi-blaster...
(gdb) r
Starting program: /usr/bin/pi-blaster -f -g 18,19 -p
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
MBox Board Revision: 0x902120
DMA Channels Info: 0x7ff5, using DMA Channel: 14
Using hardware:                   PCM
Number of channels:                 2
PWM frequency:                 100 Hz
PWM steps:                       1000
Maximum period (100  %):      10000us
Minimum period (0.100%):         10us
DMA Base:                  0x20007000

Program received signal SIGBUS, Bus error.
0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6
(gdb) bt
#0  0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6
#1  0x00000055555522bc in init_ctrl_data ()
#2  0x0000005555553348 in main ()
(gdb)

@sarfata
Copy link
Owner

sarfata commented Oct 28, 2023

Can you build with debugging symbols (edit makefile.am, add -g -DDEBUG to the end of the CFLAGS, and then re-build everything.

GDB should give you more details in the backtrace and a line number.

thanks

@szampardi
Copy link
Author

recompiled with -g -rdynamic

(gdb) bt
#0  0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6
#1  0x00000055555527bc in init_ctrl_data () at pi-blaster.c:681
#2  0x0000005555553848 in main (argc=5, argv=0x7ffffffbe8) at pi-blaster.c:1084

@szampardi
Copy link
Author 

(gdb) b 667
Breakpoint 1 at 0x5555552708: file pi-blaster.c, line 668.
(gdb) r
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Starting program: /usr/local/src/pi-blaster/pi-blaster -f -g 18,19 -p
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
MBox Board Revision: 0x902120
DMA Channels Info: 0x7ff5, using DMA Channel: 14
Using hardware:                   PCM
Number of channels:                 2
PWM frequency:                 100 Hz
PWM steps:                       1000
Maximum period (100  %):      10000us
Minimum period (0.100%):         10us
DMA Base:                  0x20007000

Breakpoint 1, init_ctrl_data () at pi-blaster.c:668
668	  struct ctl *ctl = (struct ctl *)mbox.virt_addr;
(gdb) 
(gdb) 
(gdb) r
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Starting program: /usr/local/src/pi-blaster/pi-blaster -f -g 18,19 -p
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
MBox Board Revision: 0x902120
DMA Channels Info: 0x7ff5, using DMA Channel: 14
Using hardware:                   PCM
Number of channels:                 2
PWM frequency:                 100 Hz
PWM steps:                       1000
Maximum period (100  %):      10000us
Minimum period (0.100%):         10us
DMA Base:                  0x20007000

Breakpoint 1, init_ctrl_data () at pi-blaster.c:668
668	  struct ctl *ctl = (struct ctl *)mbox.virt_addr;
(gdb) step
669	  dma_cb_t *cbp = ctl->cb;
(gdb) step
671	  uint32_t phys_gpclr0 = GPIO_PHYS_BASE + 0x28;
(gdb) step
672	  uint32_t phys_gpset0 = GPIO_PHYS_BASE + 0x1c;
(gdb) 
675	  if (delay_hw == DELAY_VIA_PWM) {
(gdb) 
679	    phys_fifo_addr = PCM_PHYS_BASE + 0x04;
(gdb) 
681	  memset(ctl->sample, 0, sizeof(ctl->sample));
(gdb) 

Program received signal SIGBUS, Bus error.
0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6
(gdb)

@szampardi
Copy link
Author 

Starting program: /usr/local/src/pi-blaster/pi-blaster -f -g 18,19 -p
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
MBox Request:
0000: 0x0000001c
0004: 0x00000000
0008: 0x00010002
000c: 0x00000004
0010: 0x00000000
0014: 0x00000000
0018: 0x00000000
MBox Response:
0000: 0x0000001c
0004: 0x80000000
0008: 0x00010002
000c: 0x00000004
0010: 0x80000004
0014: 0x00902120
0018: 0x00000000
MBox Board Revision: 0x902120
MBox Request:
0000: 0x0000001c
0004: 0x00000000
0008: 0x00060001
000c: 0x00000004
0010: 0x00000000
0014: 0x00000000
0018: 0x00000000
MBox Response:
0000: 0x0000001c
0004: 0x80000000
0008: 0x00060001
000c: 0x00000004
0010: 0x80000004
0014: 0x00007ff5
0018: 0x00000000
DMA Channels Info: 0x7ff5, using DMA Channel: 14
Using hardware:                   PCM
Number of channels:                 2
PWM frequency:                 100 Hz
PWM steps:                       1000
Maximum period (100  %):      10000us
Minimum period (0.100%):         10us
DMA Base:                  0x20007000
Requesting 69632 bytes
Alignment: 4096 bytes
mem_alloc flags:  0x1c
MBox Request:
0000: 0x00000024
0004: 0x00000000
0008: 0x0003000c
000c: 0x0000000c
0010: 0x0000000c
0014: 0x00011000
0018: 0x00001000
001c: 0x0000001c
0020: 0x00000000
MBox Response:
0000: 0x00000024
0004: 0x80000000
0008: 0x0003000c
000c: 0x0000000c
0010: 0x80000004
0014: 0x0000000a
0018: 0x00001000
001c: 0x0000001c
0020: 0x00000000
mem_ref 10
MBox Request:
0000: 0x0000001c
0004: 0x00000000
0008: 0x0003000d
000c: 0x00000004
0010: 0x00000004
0014: 0x0000000a
0018: 0x00000000
MBox Response:
0000: 0x0000001c
0004: 0x80000000
0008: 0x0003000d
000c: 0x00000004
0010: 0x80000004
0014: 0x9eb7d000
0018: 0x00000000
bus_addr = 0x9eb7d000
base=0x1eb7d000, mem=0x7ff7def000
virt_addr 0x7ff7def000
Initializing DMA ...

Program received signal SIGBUS, Bus error.
0x0000007ff7e95b90 in memset () from /usr/lib/libc.so.6
(gdb)

@sarfata
Copy link
Owner

sarfata commented Oct 28, 2023

great thanks

@sarfata
Copy link
Owner

sarfata commented Oct 28, 2023

I don't see anything obviously wrong but I have not touched this code in a long time. I want to get back into it, I will report back if I have ideas but would definitely welcome help from anyone willing to spend time looking into this crash.

@szampardi
Copy link
Author

I'm sadly not experienced enough with C programming to help debug this deeper but am more than willing to test things out if you have anything to try, will stand by for updates.

Thanks!

@sarfata sarfata changed the title doesnt start Daemon crashes when started on 64 bit systems Feb 16, 2024
@sarfata sarfata changed the title Daemon crashes when started on 64 bit systems pi-blaster crashes when started on 64 bit systems Feb 16, 2024
@sarfata sarfata mentioned this issue Feb 16, 2024
Open
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@sarfata @szampardi