Trouble setting up a SPI 240 x 380 V1.2 TFT display

[tirejas]

I'm having trouble setting up a SPI
240 x 380 V1.2 TFT display from a raspberry pi pico W with micropython V1.22.2
For this I am using the MicroPython ILI9341Display & XPT2046 Touch Screen Driver libraries from Rdagger. When running the program demo_touch.py, which I attached, the touch application does not work.
demo_touch.py_.txt

Could you help me with this problem?
Another issue would be the SD card configuration.
Could I use SPI0 together with the LCD?
Would you have any configuration example to read and write to the SD card?
Thanks you

[ricksorensen]

In the your demo_touch.py you are passing spi0 into the Demo class, which does not explicitly define the miso pin.
Maybe you meant:

Demo(display, spi1)

or if you want to use same SPI bus for both display and touch

spi0 = SPI(0, baudrate=10000000, sck=Pin(6), mosi=Pin(7), miso=Pin(8))  # Baud is too high for xpt2046 ..

Default MISO for SPI0 is Pin(4), and the default MISO for SPI1 is Pin(8)

Not sure what ramifications with SD Card would be.

[tirejas]

Thank you very much for your prompt response and sorry for my late response, I have been in the hospital for the last 5 weeks, I am well back home.
The idea is to use spi0 for the screen and spi1 for the xpt2040.
I have lowered the speed to 600000 but it doesn't work for me either.
I'm just starting out in micropython and I'm not really sure what you're telling me.
I would like to create a push button on the screen in such a way that touching it would activate an LED. Would you have any example code that covers this button?
Thank you so much

[peterhinch]

The ILI9341 is only capable of 240x320 pixels, not 240x380.

[tirejas]

Thank you very much, it is indeed a writing failure I wanted to have written 240 x 320. Thank you