esp32-boqiang-bms001-example-debug.yaml

<<: !include esp32-boqiang-bms001-example.yaml

logger:
  level: DEBUG

uart:
  id: uart_0
  # Please set the default baudrate of your Seplos BMS model here. It's sometimes 19200 baud instead of 9600.
  baud_rate: 9600
  tx_pin: ${tx_pin}
  rx_pin: ${rx_pin}
  # The increased RX buffer size is important because
  # the full BMS response must fit into the buffer
  rx_buffer_size: 384
  debug:
    dummy_receiver: false
    direction: BOTH
    # after:
    #   delimiter: "\r"
    # sequence:
    #   - lambda: UARTDebug::log_string(direction, bytes);