nray-conf_discovery_example.yaml

debug: true
listen: [8601]
host: "0.0.0.0"
targetgenerator:
  bufferSize: 5
  # The default target generator
  standard:
    enabled: true
    targets: ["172.0.0.0/16"]
    #targetFile: "./targets.txt"
    tcpports: ["top25", "80","443","8080","445","22","1099","3389","5432","111","2049","8443","8000","3306","5900","21","8888","8009","1433", "5985", "5986", "8008", "8010", "8020", "1434"]
    # https://twitter.com/ptswarm/status/1311310897592315905
    #tcpports: ["1090","1098","1099","4444","11099","47001","47002","10999", "7000-7004","8000-8003","9000-9003","9503","7070","7071", "45000","45001","8686","9012","50500","4848","11111","4444","4445","4786","5555","5556"]
    udpports: ["top5", "1433"]
    blacklist: []
    #blacklistFile: "./blacklist.txt"
    maxHostsPerBatch: 500
    maxTcpPortsPerBatch: 50
    maxUdpPortsPerBatch: 25

# Configuration of scanners goes here
scannerconfig:
  workers: 1000
  # ratelimit defines how many workers call the scan() function per second. 
  # Having a rate limit allows us to utilize most ressources by having lots
  # of workers that may wait for network IO/timeouts whereas in case of a 
  # burst (e.g. start of a scan) the rate limit blocks all workers from
  # starting their job at once
  # Expects a number or 'none' (lowercase!) if no limit should be applied.
  #ratelimit: "none"

  # tcp port scanner
  tcp:
    # Connect timeout in milliseconds
    timeout: 1500ms
    
  udp:
    # Fast sends only probes for known protocols
    fast: false
    # Default payload. This is sent when the scanner is not aware of the protocol. See documentation
    # for a complete list of protocols supported by the scanner
    defaultHexPayload: "\x6e\x72\x61\x79"
    # You may define/overwrite port:payloads at your wish. For encoding arbitrary data, see https://golang.org/ref/spec#Rune_literals
    #customHexPayloads: 
    #  "19": "A" # chargen. "A" is the same as "\x41" (hex) or "\101" (oct)
    # Timeout to wait for a response
    timeout: 1000ms

events:
  terminal:
    # Any matching filter is going to be printed
    filter: 
      environment: # empty filter is printed if a element of this type exists
      #result.port: 80
      result.portscan.open: true
    internal:
      channelsize: 1000
  json-file: 
    filename: "nray-results-fastrun.json"
    overwriteExisting: false 
    internal: # Don't touch these unless you know what you do
      channelsize: 10000 # Internal event buffer
      synctimer: 10s # flush interval