Raspberry Pi PICO RP2040

[hicksan]

Can this library be used with RP2040? Apparently lots of Arduino libraries have been ported already. It would be nice to have a menu interface consistent across devices.

[datorvictor]

works fine on my Pi PICO

[mikejr83]

I'm also having the same issue. I cannot get this to build with my platform.io setup:

Getting this at the end of a ton of warnings (and a few other errors):

*** [.pio\build\pico\lib8d7\ArduinoMenu library\menuIo.cpp.o] Error 1
*** [.pio\build\pico\lib8d7\ArduinoMenu library\nav.cpp.o] Error 1
*** [.pio\build\pico\src\main.cpp.o] Error 1

Here's the platformio.ini file:

[env:pico]
platform = raspberrypi
board = pico
framework = arduino
monitor_speed = 115200
lib_deps =
  neu-rah/ArduinoMenu library @ 4.21.3

@datorvictor Would you mind sharing a basic example?

[mikejr83]

@hicksan I was able to get this to work for my pico. I have an easy way to do this if you're using platformio with VSCode. Look in ./.pio/libdeps/pico/Arduino Menu library/src/macros.h. Head to line 55. Comment out lines 55-57.

[mikejr83]

Digging deeper I found you can add a build flag -D USE_PGM. Forces the storage into flash memory. I wish I new how to fix those lines to detect the pico and not use them somehow.

[datorvictor]

I do not remember doing anythin special. I use VS Code with arduino.

This is propably relevant from my code:

#include <Arduino.h>
#include <U8x8lib.h>
#include <U8g2lib.h>


#include <Wire.h>
#include <WiFi.h>
#include <menu.h>
#include <menuIO/serialOut.h>
#include <menuIO/serialIn.h>
#include <menuIO/chainStream.h>
#include <menuIO/U8x8Out.h>
#include <Keypad_MC17.h>
#include <menuIO/keypadIn.h>

.....

U8X8_SSD1322_NHD_256X64_4W_SW_SPI u8x8(/* clock=*/_PIN_SCK_, /* data=*/_PIN_MOSI_, /* cs=*/_PIN_CS_, /* dc=*/_PIN_DC_, /* reset=*/_PIN_RST_);

...
serialIn serial(Serial);
keypadIn kpad(customKeypad);

MENU_INPUTS(in, &kpad);  //, &serial);

#define MAX_DEPTH 2

MENU_OUTPUTS(out, MAX_DEPTH, SERIAL_OUT(Serial), U8X8_OUT(u8x8, { 0, 0, 28, 8 }));
NAVROOT(nav, mainMenu, MAX_DEPTH, in, out);`

my arduino.json:
{ "configuration": "flash=2097152_1048576,freq=133,opt=Small,rtti=Disabled,stackprotect=Disabled,exceptions=Disabled,dbgport=Disabled,dbglvl=None,usbstack=picosdk,wificountry=worldwide,ipbtstack=ipv4only,uploadmethod=default", "board": "rp2040:rp2040:rpipicow", "sketch": "PicoKBD.ino" }

some of the 10000 defines generated automatically:
"ARDUINO_VARIANT=\"rpipicow\"", "TARGET_RP2040", "PICO_FLASH_SIZE_BYTES=2097152", "ARM_MATH_CM0_FAMILY", "ARM_MATH_CM0_PLUS", "F_CPU=133000000L", "ARDUINO=10607", "ARDUINO_RASPBERRY_PI_PICO_W", "BOARD_NAME=\"RASPBERRY_PI_PICO_W\"", "ARDUINO_ARCH_RP2040",