Skip to content

Latest commit

 

History

History
247 lines (180 loc) · 8.53 KB

BuildInstructions.md

File metadata and controls

247 lines (180 loc) · 8.53 KB
Raw

Dependencies

One needs Go v1.19 and the latest stable rust to build the app. Go can be installed via

brew install go@1.19

Rust should be installed via rustup. Once rust is installed, do not forget to install the iOS targets:

rustup target install aarch64-apple-ios aarch64-apple-ios-sim x86_64-apple-ios

Pick between the ARM or x86 simulator targets, selecting the one that matches the host system.

Once both rust and go are installed, ensure they are available in your path.

Configure Xcode project

Copy template files of Xcode build configuration:

for file in ./ios/Configurations/*.template ; do cp $file ${file//.template/} ; done

Template files provide our team ID and correct provisioning profiles and generally do not require any changes when configuring our build server or developer machines for members of Mullvad development team. In all other cases perform the following steps to configure the project:

  1. Edit Base.xcconfig and fill in your Apple development team ID, which can be found on Apple developer portal in the top right corner next to your organization name (uppercase letters and digits).
  2. Edit App.xcconfig and PacketTunnel.xcconfig and supply the names of your provisioning profiles for development (Debug) and distribution (Release).
  3. Edit Screenshots.xcconfig and supply the name of your provisioning profile. We only specify development profile here as we never build UI testing targets for distribution. Skip this step if you do not intend to generate screenshots for the app.

Ensure you have a valid build profile for a development build for both MullvadVPN and PacketTunnel, both need the packet-tunnel-provider-systemextension NetworkExtension entitlement.

The following instructions are only relevant for release builds.

Create private key and Certificate Signing Request (CSR)

Create new private key and CSR

OpenSSL will ask you the password for the private key, make sure to memorize it, you'll need it later.

openssl req -new -newkey rsa:2048 \
  -outform pem -keyform pem \
  -keyout private_key.pem \
  -out cert_signing_request \
  -subj "/C=SE/O=<ORGANIZATION_NAME>/emailAddress=<YOUR_EMAIL>"

[Alternative] Create CSR using an existing private key

openssl req -new \
  -outform pem -keyform pem \
  -key private_key.pem \
  -out cert_signing_request \
  -subj "/C=SE/O=<ORGANIZATION_NAME>/emailAddress=<YOUR_EMAIL>"

Upload Certificate Signing Request (CSR) to Apple

  1. Go to https://developer.apple.com/account/resources/certificates/list
  2. Click the plus button (+) in the heading to create a new certificate
  3. Select "Apple Distribution" option from the given list, press "Continue"
  4. Select the previously created cert_signing_request file for upload
  5. Download the provided distribution.cer on disk

Download Apple WWDR certificate

WWDR certificate is used to verify the development and distribution certificates issued by Apple.

curl https://www.apple.com/certificateauthority/AppleWWDRCAG3.cer -O

Convert certificates to PEM format

openssl x509 -inform der -outform pem \
  -in distribution.cer \
  -out distribution.pem

openssl x509 -inform der -outform pem \
  -in AppleWWDRCAG3.cer \
  -out AppleWWDRCAG3.pem

Export private key and certificates

Produce a PKCS12 container with the private key and all certificates. You will be asked to enter two passphrases:

  1. Private key passphrase
  2. Export passphrase for PKCS12 file

You can store the produced apple_code_signing.p12 file as a backup to be able to restore the keys in the event of hardware failure. However you should always be able to re-create everything from scratch.

openssl pkcs12 -export \
  -inkey private_key.pem \
  -in distribution.pem \
  -certfile AppleWWDRCAG3.pem \
  -out apple_code_signing.p12 \
  -name "<FRIENDLY_KEYCHAIN_NAME>"

Remove old private key and certificates from Keychain

Skip this section if you create the private key for the very first time.

If you happen to re-create the keys, you will have to remove the old keys and certificates from Keychain.

You can list all certificates with corresponding keys by using the following command:

security find-identity

You'll get a list of identities that looks like that:

Valid identities only
1) <HASH_ID> "Apple Distribution: <COMPANY NAME> (<TEAM ID>)"
2) <HASH_ID> "Apple Development: <COMPANY NAME> (<TEAM ID>)"

Pick the one that you don't want anymore and copy the <HASH_ID> from the output, then paste into the command below:

security delete-identity -Z <HASH_ID>

This should take care of removing both private keys and certificates. Repeat as many times as needed if you wish to remove multiple identities.

Import private key and certificates into Keychain

security import apple_code_signing.p12 -f pkcs12 \
  -T /usr/bin/codesign \
  -P <EXPORT_PASSPHRASE>

Note: -T /usr/bin/codesign instructs Keychain to suppress password prompt during code signing, although you still have to unlock Keychain for that to have any effect. This instruction is equivalent to choosing "Always allow" in the password prompt GUI on the first run of codesign tool.

Note: providing the export passphrase using the -P flag is considered unsafe. Leave the -P <EXPORT_PASSPHRASE> out to enter the passphrase via GUI.

Technically after that you can clean up all created keys and certificates since all of them are securely stored in Keychain now.

rm distribution.{pem,cer} \
  AppleWWDRCAG3.{pem,cer} \
  cert_signing_request \
  apple_code_signing.p12 \
  private_key.pem

Create iOS provisioning profiles

We will now create the provisioning profiles listed below using the Apple developer console.

App ID Provisioning Profile Name
net.mullvad.MullvadVPN Mullvad VPN Release
net.mullvad.MullvadVPN.PacketTunnel Packet Tunnel Release

Follow these steps to add each of provisioning profiles:

  1. Go to https://developer.apple.com/account/resources/profiles/list

  2. Click the plus button (+) in the heading to create a new provisioning profile

  3. Choose "App Store" under "Distribution", then hit "Continue"

  4. Choose the App ID (see the table above) and hit "Continue"

  5. Choose the distribution certificate that you had created after uploading the CSR (i.e <ORGANIZATION_NAME> (Distribution))

  6. Type in the profile name (see the table above) and hit "Generate"

  7. Download the certificate in ios/iOS Provisioning Profiles directory. Create the directory if it does not exist.

    Note: you can use a different directory for storing provisioning profiles, however in that case, make sure to provide the path to the custom location via IOS_PROVISIONING_PROFILES_DIR environment variable when running build.sh (more on that later).

Setup AppStore credentials

For the automatic uploads to work properly, make sure to provide the Apple ID and password via environment variables:

  1. IOS_APPLE_ID - Your Apple ID (Email)
  2. IOS_APPLE_ID_PASSWORD - Your Apple ID password or keychain reference (see explanation below)

IOS_APPLE_ID_PASSWORD accepts a keychain reference in form of @keychain:<KEYCHAIN_ITEM_NAME>.

Use the app specific password instead of the actual account password and save it to Keychain. The app specific password can be created via Apple ID website and added to Keychain using the following command (note that altool will be authorized to access the saved password):

xcrun altool --store-password-in-keychain-item <KEYCHAIN_ITEM_NAME> \
  -u <APPLE_ID_EMAIL> \
  -p "<APP_SPECIFIC_PASSWORD>"

Keychain quirks

It's possible that codesign will keep throwing the password prompts for Keychain, in that case try running the following commands after importing the credentials into Keychain:

security unlock-keychain <KEYCHAIN>
security set-key-partition-list -S apple-tool:,apple: -s <KEYCHAIN>

where <KEYCHAIN> is the name of the target Keychain where the signing credentials are stored. This guide does not use a separate Keychain store, so use login.keychain-db then.

Reference: https://docs.travis-ci.com/user/common-build-problems/#mac-macos-sierra-1012-code-signing-errors

SSL pinning

The iOS app utilizes SSL pinning. Root certificates can be updated by using the source certificates shipped along with mullvad-api:

openssl x509 -in ../mullvad-api/le_root_cert.pem -outform der -out MullvadREST/Assets/le_root_cert.cer