You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have noticed Bambu Lab printers have the ability to select pressure advance for each loaded spool. I have also found this very useful once it has all been set up properly. Maybe this could be something that can be implemented into Happy Hare? This would be a major nice to have, especially for Print Farms.
Enable individual pressure advance settings for each material tool or filament gate.
Provide a user-friendly interface for adjusting pressure advance via G-code commands or printer interface dropdowns.
Allow users to save and manage presets for different materials.
Flow Rate Control (Future Consideration):
Consider integrating flow rate control alongside pressure advance for optimized print quality.
This could help cater to users of all experience levels. This also increases the speed and use for seasoned users.
Facilitates experimentation with different materials without manual adjustments.
Potential Integration:
This feature could potentially be integrated into Spoolman, though further investigation is needed to explore this possibility as I haven't really looked into it.
The text was updated successfully, but these errors were encountered:
Extrusion and Speed overrides are supported (and retained) per-gate with Happy Hare. The PA is on the wishlist. The question is really whether it is in the gate map or the slicer tool map... The gate map is what the MMU thinks it has loaded whilst the slicer tool map is what the print job expects..
I have noticed Bambu Lab printers have the ability to select pressure advance for each loaded spool. I have also found this very useful once it has all been set up properly. Maybe this could be something that can be implemented into Happy Hare? This would be a major nice to have, especially for Print Farms.
Enable individual pressure advance settings for each material tool or filament gate.
Provide a user-friendly interface for adjusting pressure advance via G-code commands or printer interface dropdowns.
Allow users to save and manage presets for different materials.
Flow Rate Control (Future Consideration):
Consider integrating flow rate control alongside pressure advance for optimized print quality.
This could help cater to users of all experience levels. This also increases the speed and use for seasoned users.
Facilitates experimentation with different materials without manual adjustments.
Potential Integration:
This feature could potentially be integrated into Spoolman, though further investigation is needed to explore this possibility as I haven't really looked into it.
The text was updated successfully, but these errors were encountered: