Skip to content

Latest commit

 

History

History
268 lines (193 loc) · 8.17 KB

CONTRIBUTING.md

File metadata and controls

268 lines (193 loc) · 8.17 KB
Raw

Contributing Guide

We welcome all kinds of contributions. You don't need to be an expert in frontend or Python development to help out.

Checklist

Contributions are made through pull requests. Before sending a pull request, make sure to do the following:

Please reach out to the marimo team before starting work on a large contribution. Get in touch at GitHub issues or on Discord.

Prerequisites

To build marimo from source, you'll need to have Node.js, pnpm, GNU make, and Python (>=3.8) installed.

  • Install Node.js >= 18
    • We use Node.js version 20
  • Install pnpm == 8.x
    • npm install -g pnpm@8
  • Install GNU Make (you may already have it installed)
  • Install Python >= 3.8. (You may already it installed. To see your version, use python -v at the command line.)

And you'll need pre-commit to run some validation checks:

pipx install pre-commit  # or `pip install pre-commit` if you have a virtualenv

You can optionally install pre-commit hooks to automatically run the validation checks when making a commit:

pre-commit install

Building from source

Be sure to install the dependencies above before building from source.

Build from source

After installing the dependencies, run the following in a fresh Python virtual environment (such as venv or virtualenv):

make fe && make py

make fe builds the frontend. make py does an editable install of marimo.

(All make commands should be run in the project's root directory.)

Building from source, unminified

To build the frontend unminified, run:

NODE_OPTIONS=--max_old_space_size=8192 NODE_ENV=development make fe -B

make commands

Command Category Description
help General Show this help
py Setup Editable python install; only need to run once
install-all Setup Install everything; takes a long time due to editable install
fe Build Package frontend into marimo/
wheel Build Build wheel
check Test Run all checks
check-test Test Run all checks and tests
test Test Run all tests
fe-check Lint/Test Check frontend
fe-test Test Test frontend
e2e Test Test end-to-end
fe-lint Lint Lint frontend
fe-typecheck Lint Typecheck frontend
py-check Lint Check python
py-test Test Test python
py-snapshots Test Update HTML snapshots
storybook Docs Run Storybook
docs Docs Build docs. Use make ARGS="-a" docs to force docs to rebuild
docs-auto Docs Autobuild docs
docs-clean Docs Remove built docs

Lint, Typecheck, Format

All checks.

make check

Frontend.

make fe-check

Python.

make py-check

Tests

We have frontend unit tests, Python unit tests, and end-to-end tests. Code changes should be accompanied by unit tests. Some changes should also be accompanied by end-to-end tests.

To run all tests:

make test

This can take some time. To run just frontend tests, just Python tests, or just end-to-end tests, read below.

Frontend

In the root directory, run:

make fe-test

Python

In the root directory, run

make py-test

End-to-end

We use playwright to write and run end-to-end tests, which exercise both the marimo library and the frontend.

(The first time you run, you may be prompted by playwright to install some dependencies; follow those instructions.)

For best practices on writing end-to-end tests, check out the Best Practices doc.

Run end-to-end tests.

In the root directory, run:

make e2e

Run tests interactively.

In frontend/:

npx playwright test --ui

Run a specific test.

In frontend/:

npx playwright test <filename> --ui
# e.g.
npx playwright test cells.test.ts --ui

or

npx playwright test --debug <filename>

Storybook

To open Storybook, run the following:

cd frontend/
pnpm storybook

Hot reloading / development mode

You can develop on marimo with hot reloading on the frontend and/or development mode on the server (which automatically restarts the server on code changes). These modes especially helpful when you're making many small changes and want to see changes end-to-end very quickly.

For the frontend, you can run either

# starts a dev server on localhost:3000 and proxy requests to your marimo server
# has hot reloading and the fastest way to develop the frontend
# read caveats below
pnpm dev

OR

# OR, in order to test closer to production, you can build the frontend and watch for changes
pnpm build:watch

For the backend, we recommend running without auth (--no-token):

marimo edit --no-token
# or in debug mode
marimo -d edit --no-token
  • When to run with hot-reloading?: When you are developing on the frontend and want to see changes immediately. This is useful for styling, layout, new plugins, etc. Developing through the Vite server may have inconsistent behavior due to proxied api/websocket request and since the marimo Python server is not serving the HTML.
  • When to develop with the frontend in watch mode?: When you are making few frontend changes, or when you want to test the frontend in a way that is closer to production.
  • When to run marimo CLI with development mode?: When you are making changes to the backend and want to see debug logs. When developing on marimo plugins, you can run with "On module change" as "autorun" to see changes immediately.

Caveats for running pnpm dev

Running pnpm dev will serve the frontend from a Vite dev server, not from the marimo server. This means that:

  1. You will want to run your marimo server with --headless and --no-token so it does not open a new browser tab, as it will interfere with the frontend dev server.
  2. The tradeoff of using the frontend dev server is that it is faster to develop on the frontend, but you will not be able to test the frontend in the same way that it will be used in production.

Editor settings

If use use vscode, you might find the following settings.json useful:

{
  "editor.formatOnSave": true,
  "editor.formatOnPaste": false,
  "[typescript]": {
    "editor.defaultFormatter": "biomejs.biome"
  },
  "[typescriptreact]": {
    "editor.defaultFormatter": "biomejs.biome"
  }
}