Aurora won't install

[soakland5]

I downloaded Aurora for Cloudlog and installed the necessary Microsoft Net Runtime but it complains of the wrong OS. I am using Windows 11 Pro. Any ideas to fix this? Thanks, Scott, W1AL

[magicbug]

I'm not aware of any issues on Windows 11 the only thing I can think of is that your running ARM-based CPU

What's the exact wording of the error that's presented by the operating system?

[soakland5]

I believe it says “cannot run in this OS”. I’m not home at the moment. Can check again and send the exact screenshot if need be. I’m running a windows 11 mini desktop pc Scott

…

On Sat, Oct 7, 2023 at 10:06 AM Peter Goodhall ***@***.***> wrote: I'm not aware of any issues on Windows 11 the only thing I can think of is that your running ARM-based CPU What's the exact wording of the error that's presented by the operating system? — Reply to this email directly, view it on GitHub <#2550 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMU3GS52ZXS5EOED7SAULWTX6FOX7AVCNFSM6AAAAAA5W5VIV6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TEMJXGUZTE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[magicbug]

In the search box can you type System Information and load up the app (should be on win 11) and screenshot the data for me especially interested in the processor info

[soakland5]

Sure thing. I’ll also try running the app in compatibility mode. Will send a screenshot in a couple of days. Really like CloudLog a lot. Also trying TYqsl but it seems to make WSJT-X freeze up so looking to stick with yours :) Thanks Scott W1AL

…

On Sat, Oct 7, 2023 at 10:22 AM Peter Goodhall ***@***.***> wrote: In the search box can you type System Information and load up the app (should be on win 11) and screenshot the data for me especially interested in the processor info — Reply to this email directly, view it on GitHub <#2550 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMU3GS5KB24ETIRB7K5EVTDX6FQSBAVCNFSM6AAAAAA5W5VIV6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TEMJXGYYTQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[soakland5]

Hi Peter: I got it running in compatibility mode and got it to show WSJT-X as green - connected. However no qsos are sent to Cloudlog. Entered in a cloudlog API and logbook public slug URL as well as the ID of the logbook. Checked your website and followed it the best I could. Can you send detailed instructions I need to put in each Aurora field in setup ? I must be making a mistake Thanks Scott W1AL

…

On Sat, Oct 7, 2023 at 10:33 AM W1AL ***@***.***> wrote: Sure thing. I’ll also try running the app in compatibility mode. Will send a screenshot in a couple of days. Really like CloudLog a lot. Also trying TYqsl but it seems to make WSJT-X freeze up so looking to stick with yours :) Thanks Scott W1AL On Sat, Oct 7, 2023 at 10:22 AM Peter Goodhall ***@***.***> wrote: > In the search box can you type System Information and load up the app > (should be on win 11) and screenshot the data for me especially interested > in the processor info > > — > Reply to this email directly, view it on GitHub > <#2550 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AMU3GS5KB24ETIRB7K5EVTDX6FQSBAVCNFSM6AAAAAA5W5VIV6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TEMJXGYYTQ> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[soakland5]

Hi Peter: I got it working. My station logbook somehow got disassociated from the station location in Cloudlog. Once I fixed that I was able to log my wsjt-x QSOs with Aurora. One other question: Aurora doesn’t show any info in “last call sign lookup. Or “last grid ***@***.*** Should it ? Scott W1AL

…

On Sat, Oct 7, 2023 at 8:19 PM W1AL ***@***.***> wrote: Hi Peter: I got it running in compatibility mode and got it to show WSJT-X as green - connected. However no qsos are sent to Cloudlog. Entered in a cloudlog API and logbook public slug URL as well as the ID of the logbook. Checked your website and followed it the best I could. Can you send detailed instructions I need to put in each Aurora field in setup ? I must be making a mistake Thanks Scott W1AL On Sat, Oct 7, 2023 at 10:33 AM W1AL ***@***.***> wrote: > Sure thing. I’ll also try running the app in compatibility mode. Will > send a screenshot in a couple of days. Really like CloudLog a lot. Also > trying TYqsl but it seems to make WSJT-X freeze up so looking to stick with > yours :) > > Thanks > Scott W1AL > > On Sat, Oct 7, 2023 at 10:22 AM Peter Goodhall ***@***.***> > wrote: > >> In the search box can you type System Information and load up the app >> (should be on win 11) and screenshot the data for me especially interested >> in the processor info >> >> — >> Reply to this email directly, view it on GitHub >> <#2550 (comment)>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/AMU3GS5KB24ETIRB7K5EVTDX6FQSBAVCNFSM6AAAAAA5W5VIV6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TEMJXGYYTQ> >> . >> You are receiving this because you authored the thread.Message ID: >> ***@***.***> >> >

[magicbug]

Be interested to know how you got Aurora to run

Yes Last Callsign only works for TCP which is separate to WSJT that being said, similar functions coming in an update soon

[soakland5]

Hi Peter, I got it working by making sure the station logbook is associated with the location. Somehow it got separated. I see that WSJT-X Improved fixed their Cloudlog logging so I am now using that instead of needing Aurora. I try to keep things simple without a lot of extra apps. Thanks. 73 Scott W1AL

…

On Sun, Oct 8, 2023 at 6:02 PM Peter Goodhall ***@***.***> wrote: Be interested to know how you got Aurora to run Yes Last Callsign only works for TCP which is separate to WSJT that being said, similar functions coming in an update soon — Reply to this email directly, view it on GitHub <#2550 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMU3GS5VXZL2QUTR7CB2DQTX6MPGHAVCNFSM6AAAAAA5W5VIV6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TEMRVGE3TM> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[magicbug]

Hi Scott,

OK strange but pleased its resolved now

Peter

[GregTroar]

I do confirm that I could not install CloudlogAurora as well on Windows 11 I did install with compatibility mode windows 7

[magicbug]

Thanks Greg, not sure what the Win 11 issue is but I'll look into it some more

[GregTroar]

After installing anyway the TCP for JTDX does not seem to work at all.
Nothing happens while TCP server is activated in JTDX.

Thanks

[magicbug]

When you say nothing happens Cloudlog Aurora accepts ADIF packets via TCP so there isn't much that can run.

Can you also confirm you installed Aurora as Admin could also be causing the issue I think

[GregTroar]

No I did not install with admin rights nor I run it in admin.
I will try and I also need to install with compatibility mode as windows 7.
Thanks

[GregTroar]

Whatever I tried I never was able to get Aurora Cloudlog to work.
Is anyone having it working for let's say logging QSO from MSHV in TCP ?
Nothing happens on my side

[GregTroar]

Does anyone have Cloudlog Aurora working ?
Trying to use with MSHV and TCP with proper Public slug and station Location ID but that does not work at all.
Nothing added to Cloudlog and Last searched call and last searched grid always showing Unknown.

[magicbug]

MSHV works just fine with the following settings

JTDX seems to function good with

[soakland5]

Just fyi - the latest “WSJT-X Improved” logs directly to Cloudlog without issues, thus eliminating the need for Aurora

…

On Thu, Nov 30, 2023 at 6:27 AM Peter Goodhall ***@***.***> wrote: MSHV works just fine with the following settings image.png (view on web) <https://github.com/magicbug/Cloudlog/assets/84308/085efe81-d7ec-4941-a8bc-0a6201ec6b0c> JTDX seems to function good with image.png (view on web) <https://github.com/magicbug/Cloudlog/assets/84308/86e95b33-445f-4b4b-82bc-62dff33d3168> — Reply to this email directly, view it on GitHub <#2550 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMU3GS4IV55MJF3GZS5YZCLYHBUR3AVCNFSM6AAAAAA5W5VIV6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TOMJWGY3DM> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[GregTroar]

MSHV works just fine with the following settings

JTDX seems to function good with

But in Aurora which one do you activate the WSJT-X UDP for MSHV ?

[GregTroar]

ok found my error and missed the trailing slash at the end of the cloudlog url now it works !

But the TCP does not work while it is activated in MShv with port 52001

[R1BLH]

When you say nothing happens Cloudlog Aurora accepts ADIF packets via TCP so there isn't much that can run.

Can you also confirm you installed Aurora as Admin could also be causing the issue I think

I have tried Cloudlog Aurora with JTDX.
My test software successfully receives TCP ADIF data from JTDX (as you can see on the screenshot), but Aurora still shows Unknown for last searched callsign and grid square (server port of my test software is closed when Aurora is running as administrator).
If I would close Aurora, then JTDX shows a TCP server connection error when logging QSOs, which means that Aurora TCP server is accepting connections.

Is any possibility to get the debug log for Aurora?

[OK1TK]

HI guys, the same problem on Win 11. I downloaded the Cloudlog-Aurora.exe and can't run it. It says (transalted from CZ): "This application can't run on your computer. If you want to find a vaersion compatible with your compuer contact the SW provider." The same if i try to run the file as admin.

[f4cib]

Same here.
Workaround is to install it with W7 compatibility mode as admin. Then works as expected on W11.

[OK1TK]

Unfortunately it doesn't work for me. Could you describe step by step what you did, please ?

[f4cib]

Right click on aurora installer, then Properties, compatibility tab and choose execute with compatibility windows 7 like in screenshot below (sorry it is in French)

Apply, OK. Then execute installer as administrator and it should work

[github-actions]

Uh oh! @f4cib, the image you shared is missing helpful alt text. Check #2550 (comment).

Alt text is an invisible description that helps screen readers describe images to blind or low-vision users. If you are using markdown to display images, add your alt text inside the brackets of the markdown image.

Learn more about alt text at Basic writing and formatting syntax: images on GitHub Docs.

[github-actions]

Uh oh! @f4cib, the image you shared is missing helpful alt text. Check #2550 (comment).

Alt text is an invisible description that helps screen readers describe images to blind or low-vision users. If you are using markdown to display images, add your alt text inside the brackets of the markdown image.

Learn more about alt text at Basic writing and formatting syntax: images on GitHub Docs.

[OK1TK]

This is exactly what I did. Downloaded the installer, right click, Windows 7 compatibilty mode, OK and then run the installer as admin.

Sory it is in Czech. But it is the same setup. I alredy set the properties to "Run as admin".

This is what I get:

It says: "This application can not run on your computer. If you want to find the version compatible with your PC contact rhe SW developer." The only option is "Close"

My PC info:

Everything should be updated.

[github-actions]

Uh oh! @OK1TK, the image you shared is missing helpful alt text. Check #2550 (reply in thread).

Alt text is an invisible description that helps screen readers describe images to blind or low-vision users. If you are using markdown to display images, add your alt text inside the brackets of the markdown image.

Learn more about alt text at Basic writing and formatting syntax: images on GitHub Docs.

[f4cib]

Sorry, same OS here W11Pro 23H2 but looks like behavior is different so cannot help you further more :(
I've checked what was was my execution setting on aurora (they are as default) but you're stucked ahead that !