Skip to content
This repository has been archived by the owner on May 23, 2024. It is now read-only.

Latest commit

 

History

History
89 lines (67 loc) · 3.15 KB

README.md

File metadata and controls

89 lines (67 loc) · 3.15 KB
Raw

⚠️ This project has moved to a dedicated repository: https://github.com/open-ephys/onix-headstage-64 This folder should be considered archived.

headstage-64

Serialized, multifunction headstage for small rodents. Designed to function with eib-64.

headstage-64

Electrophysiology

This heastage uses an Intan RHD2164 bioamplifier chip. This chip provides:

  • 64 channels of ephys are pinned out through the large mezzanine connector on the bottom of the headstage
  • 3 auxiliary channels
    • AUX 1 and 2 are pinned out on the bottom of the headstage to an unpopulated mezzanine connector
    • Channel 3 is tied to the electrical stimulator's current measurement circuit

3D Position Tracking

Headstage-64 featurs 4 TS4231 Vive lighthouse receivers for 3D position tracking. They work with V2 lighthouses. To set up tracking,

  1. Serial into each of the basestations using the USB connection on the back and set up a terminal conneciton using screen /dev/ttyACM0 115200 or similar

  2. Once connected you can hit Tab to see commands

  3. Set the mode of one base staiton to 1 (mode 1) and the other to 2 (mode 2).

3D Orientation Tracking

TODO

Neural Stimulators

Headstage-64 provides onboard electrical and optical stimulation. Stimulus trains can be parameterized in a similar way to the master-8 or pulse pal. Electical and optical stimulus trains cannot be delivered simultaneously. If there is a conflict, electical stimuluation will take priority and optical stimulus triggers will be ignored.

To acheive the shortest latency, electrical and optical stimulation can be triggered using the GPIO1 serializer output. Because both stimulators share this trigger line, it is important to only enable one of the devices (using its ENABLE register) prioir to toggling this pin.

Optical Stimulation

Q. Can i parallel the Cathode connections to increase max current A. Yes.

Electical Stimulation

The electrical stimulation cicuit is an improved Howland current pump followed by an precision current measurement circuit. The current pump is supplied by +/-15V rails and can supply up to +/- 2.5 mA. The output c

ISTIM = (VDAC - 2.5)/1000. e.g. VDAC = 2.5 -> ISTIM = 0 VDAC = 5.0 -> ISTIM = 2.5 mA VDAC = 0.0 -> ISTIM = -2.5mA

and

Imeas = 400 * ISTIM + 1.25V e.g. ISTIM = 0 -> IMEAS = 1.25V ISTIM = 2.5mA -> IMEAS = 2.25V ISTIM = -2.5mA -> IMEAS = 0.25V

Schematic

headstage-64 Schematic

Gerber Files

{% include gerber_layers.md %}

headstage-64 Gerbers

Bill of Materials

The BOM is located on this google sheet.

FPGA Pinout

The FPGA pinout is located on this google sheet.

Connector Pinout

The headstage connector pinout (ADC input mapping, stimulation connections, etc) is located on this google sheet