Spidermonkey configure fails on Raspberry Pi w/ Debian #58
Comments
|
Cross reference: @benoitc has managed to get CouchDB running on Raspberry Pi. |
|
by davidoccam » Mon Aug 27, 2012 7:03 pm https://friendpaste.com/6GW1BpWK2UNCAcuCexF1kM at 928 is the cause of problems this I found instructive I think widelord made the changes to configure and not to configure.in and his working configure gets overwritten in next build causing second failure. This is a widespread issue and I wish to get to the real cause. You are nearly there Widelord - I think |
|
Sounds like @snej was able to get an almost-working copy of CouchDB 1.2 installed simply via The only problem he ran into was a permissions issue. So maybe a little poking into who/how that package is being maintained would answer some questions? |
|
FYI, I'm running the Raspbian distro. This is almost certainly not the same distro that the OP was trying to install on, as Raspbian was only released in July (a week or so before I did my install.) As Raspbian is now the recommended Linux to install on RPi, the OP's error might be moot by now... |
|
I'm running the newest Raspbian image (2012-10-28-wheezy-raspbian) and have precisely the same issue: "checking for correct temporary object destruction order" fails, and then the build terminates with failure. I need to be able to use the development versions of Couch, not the package version, so the apt-get doesn't work for me; any more ideas what might be causing this issue? |
|
spidemonkey still need a patch?
|
|
Yes Spidermonkey will not compile without patch, CFLAGS="-O2 -mcpu=arm1176jzf-s -mfpu=vfp -mfloat-abi=hard" see http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17983&p=191171 for chapter and verse and benchmarks on various combinations On 31/10/12 06:21, Benoit Chesneau wrote:
|
|
How do you put in those flags, in the context of a rake task? I tried just setting them locally, and it didn't seem to help. |
|
If I run Then I get the same error. However, if I run I get a few errors at the beginning of the configure, but then it completes successfully, and I can run the make. The make crashes later, however, with a bunch of undefined references. |
|
Any updates on this? |
|
I was having this problem as well. It turns out, in the end, I didn't need to compile from source- SpiderMonkey is installable from the repository via: (For me it was the latter, but I was trying to install to get JS support for elinks, not couchDB. This worked to build elinks from source with native JS support, for anyone looking to do the same) |
I'm trying to get CouchDB 1.2.0 up and running on my brand new Raspberry Pi, but the process fails during the Spidermonkey configure process (I think). Here is the end of the output with --trace:
configure:11226: checking for an implementation of va_copy()
configure:11250: gcc -o conftest -fno-strict-aliasing -pthread -lpthread conftest.c -ldl 1>&5
configure: In function 'f':
configure:11244: warning: incompatible implicit declaration of built-in function 'exit'
configure:11267: checking for an implementation of __va_copy()
configure:11291: gcc -o conftest -fno-strict-aliasing -pthread -lpthread conftest.c -ldl 1>&5
configure: In function 'f':
configure:11285: warning: incompatible implicit declaration of built-in function 'exit'
configure:11308: checking whether va_lists can be copied by value
configure:11332: gcc -o conftest -fno-strict-aliasing -pthread -lpthread conftest.c -ldl 1>&5
configure: In function 'f':
configure:11326: warning: incompatible implicit declaration of built-in function 'exit'
configure:11441: checking for ARM EABI
configure:11459: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11481: checking for gcc 3.0 ABI
configure:11499: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11523: checking for C++ "explicit" keyword
configure:11538: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11559: checking for C++ "typename" keyword
configure:11583: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11604: checking for modern C++ template specialization syntax support
configure:11619: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11641: checking whether partial template specialization works
configure:11654: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11675: checking whether operators must be re-defined for templates derived from templates
configure:11692: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11714: checking whether we need to cast a derived template to pass as its base class
configure:11728: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11749: checking whether the compiler can resolve const ambiguities for templates
configure:11775: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11797: checking whether the C++ "using" keyword can change access
configure:11810: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11821: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure: In function 'int main()':
configure:11814: error: 'int A::foo()' is inaccessible
configure:11817: error: within this context
configure: failed program was:
line 11813 "configure"
include "confdefs.h"
class A { public: int foo() { return 1; } };
class B : public A { private: using A::foo; };
int main() {
B b; return b.foo();
; return 0; }
configure:11849: checking whether the C++ "using" keyword resolves ambiguity
configure:11870: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11891: checking for "std::" namespace
configure:11903: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11924: checking whether standard template operator!=() is ambiguous
configure:11939: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11961: checking for C++ reinterpret_cast
configure:11974: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:11995: checking for C++ dynamic_cast to void*
configure:12022: c++ -o conftest -fno-strict-aliasing -pthread -lpthread conftest.C -ldl 1>&5
configure:12046: checking whether C++ requires implementation of unused virtual methods
configure:12058: c++ -o conftest -fno-strict-aliasing -pthread -lpthread conftest.C -ldl 1>&5
/tmp/ccMnFdpy.o: In function
X::X()': conftest.C:(.text._ZN1XC1Ev[X::X()]+0x30): undefined reference tovtable for X'collect2: ld returned 1 exit status
configure: failed program was:
line 12051 "configure"
include "confdefs.h"
class X {private: virtual void never_called();};
int main() {
X x;
; return 0; }
configure:12081: checking for trouble comparing to zero near std::operator!=()
configure:12097: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:12121: checking for thread keyword for TLS variables
configure:12133: c++ -o conftest -fno-strict-aliasing -pthread -lpthread -fPIC -shared -Wl,-z,defs conftest.C -ldl 1>&5
configure:12170: checking for malloc.h
configure:12282: checking for strndup
configure:12313: c++ -o conftest -fno-strict-aliasing -pthread -lpthread conftest.C -ldl 1>&5
configure:12282: checking for posix_memalign
configure:12313: c++ -o conftest -fno-strict-aliasing -pthread -lpthread conftest.C -ldl 1>&5
configure:12282: checking for memalign
configure:12313: c++ -o conftest -fno-strict-aliasing -pthread -lpthread conftest.C -ldl 1>&5
configure:12282: checking for valloc
configure:12313: c++ -o conftest -fno-strict-aliasing -pthread -lpthread conftest.C -ldl 1>&5
configure:12340: checking for __attribute((always_inline))
configure:12352: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:12367: checking for attribute((malloc))
configure:12379: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:12394: checking for attribute((warn_unused_result))
configure:12406: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:12421: checking for attribute((noreturn))
configure:12433: c++ -c -fno-strict-aliasing -pthread conftest.C 1>&5
configure:12457: checking for LC_MESSAGES
configure:12469: gcc -c -fno-strict-aliasing -pthread conftest.c 1>&5
configure:12492: checking for localeconv
configure:12520: gcc -o conftest -fno-strict-aliasing -pthread -lpthread conftest.c -ldl 1>&5
configure:13041: checking for valid optimization flags
configure:13052: gcc -c -fno-strict-aliasing -pthread -march=armv7-a -marm -mfloat-abi=softfp -Os -freorder-blocks -fomit-frame-pointer conftest.c 1>&5
configure:13767: checking for __cxa_demangle
configure:13798: c++ -o conftest -fno-strict-aliasing -pthread -march=armv7-a -marm -mfloat-abi=softfp -lpthread conftest.C -ldl 1>&5
configure:13846: checking for unwind.h
configure:13856: gcc -E conftest.c >/dev/null 2>conftest.out
configure:13875: checking for _Unwind_Backtrace
configure:13903: gcc -o conftest -fno-strict-aliasing -pthread -march=armv7-a -marm -mfloat-abi=softfp -lpthread conftest.c -ldl 1>&5
configure:13952: checking for gcc -pipe support
dummy-hello.c:2:21: warning: missing terminating " character
dummy-hello.c: In function 'main':
dummy-hello.c:2: error: missing terminating " character
dummy-hello.c:3:1: warning: missing terminating " character
dummy-hello.c:3: error: missing terminating " character
dummy-hello.c:3: error: expected expression at end of input
dummy-hello.c:3: error: expected declaration or statement at end of input
configure:13974: gcc -c -fno-strict-aliasing -pthread -march=armv7-a -marm -mfloat-abi=softfp -pipe conftest.c 1>&5
configure:14004: checking whether C compiler supports -fprofile-generate
configure:14013: gcc -c -fno-strict-aliasing -pthread -march=armv7-a -marm -mfloat-abi=softfp -pipe -fprofile-generate -fprofile-correction conftest.c 1>&5
configure:14077: checking whether C++ compiler has -pedantic long long bug
configure:14086: c++ -c -fno-strict-aliasing -pthread -march=armv7-a -marm -mfloat-abi=softfp -pipe -Wall -Wpointer-arith -Woverloaded-virtual -Wsynth -Wno-ctor-dtor-privacy -Wno-non-virtual-dtor -Wno-invalid-offsetof -Wno-variadic-macros -Werror=return-type -pedantic -Wno-long-long conftest.C 1>&5
configure:14111: checking for correct temporary object destruction order
configure:14139: c++ -o conftest -fno-strict-aliasing -pthread -march=armv7-a -marm -mfloat-abi=softfp -pipe -lpthread conftest.C -ldl 1>&5
configure: failed program was:
line 14116 "configure"
include "confdefs.h"
ifdef __cplusplus
extern "C" void exit(int);
endif
class A {
public: A(int& x) : mValue(x) {}
~A() { mValue--; }
operator char*_() { return 0; }
private: int& mValue;
};
void func(char *_arg) {}
int m=2;
void test() {
func(A(m));
if (m==1) m = 0;
}
int main() {
test();
return(m);
}
== End of config.log ==
rake aborted!
Command failed with status (1): [env /opt/build-couchdb/dependencies/spider...]
/usr/lib/ruby/1.8/rake.rb:995:in
sh' /usr/lib/ruby/1.8/rake.rb:1010:incall'/usr/lib/ruby/1.8/rake.rb:1010:in
sh' /usr/lib/ruby/1.8/rake.rb:1094:insh'/opt/build-couchdb/tasks/tracemonkey.rake:42
/opt/build-couchdb/tasks/lib.rb:185:in
show_file' /opt/build-couchdb/tasks/tracemonkey.rake:41 /opt/build-couchdb/tasks/tracemonkey.rake:28:inchdir'/opt/build-couchdb/tasks/tracemonkey.rake:28
/usr/lib/ruby/1.8/tmpdir.rb:129:in
mktmpdir' /opt/build-couchdb/tasks/tracemonkey.rake:27 /usr/lib/ruby/1.8/rake.rb:636:incall'/usr/lib/ruby/1.8/rake.rb:636:in
execute' /usr/lib/ruby/1.8/rake.rb:631:ineach'/usr/lib/ruby/1.8/rake.rb:631:in
execute' /usr/lib/ruby/1.8/rake.rb:597:ininvoke_with_call_chain'/usr/lib/ruby/1.8/monitor.rb:242:in
synchronize' /usr/lib/ruby/1.8/rake.rb:590:ininvoke_with_call_chain'/usr/lib/ruby/1.8/rake.rb:607:in
invoke_prerequisites' /usr/lib/ruby/1.8/rake.rb:604:ineach'/usr/lib/ruby/1.8/rake.rb:604:in
invoke_prerequisites' /usr/lib/ruby/1.8/rake.rb:596:ininvoke_with_call_chain'root@raspberrypi:/opt/build-couchdb# /usr/lib/ruby/1.8/monitor.rb:242:in
synchronize' /usr/lib/ruby/1.8/rake.rb:590:ininvoke_with_call_chain'/usr/lib/ruby/1.8/rake.rb:607:in
invoke_prerequisites' /usr/lib/ruby/1.8/rake.rb:604:ineach'/usr/lib/ruby/1.8/rake.rb:604:in
invoke_prerequisites' /usr/lib/ruby/1.8/rake.rb:596:ininvoke_with_call_chain'/usr/lib/ruby/1.8/monitor.rb:242:in
synchronize' /usr/lib/ruby/1.8/rake.rb:590:ininvoke_with_call_chain'/usr/lib/ruby/1.8/rake.rb:607:in
invoke_prerequisites' /usr/lib/ruby/1.8/rake.rb:604:ineach'/usr/lib/ruby/1.8/rake.rb:604:in
invoke_prerequisites' /usr/lib/ruby/1.8/rake.rb:596:ininvoke_with_call_chain'/usr/lib/ruby/1.8/monitor.rb:242:in
synchronize' /usr/lib/ruby/1.8/rake.rb:590:ininvoke_with_call_chain'/usr/lib/ruby/1.8/rake.rb:607:in
invoke_prerequisites' /usr/lib/ruby/1.8/rake.rb:604:ineach'/usr/lib/ruby/1.8/rake.rb:604:in
invoke_prerequisites' /usr/lib/ruby/1.8/rake.rb:596:ininvoke_with_call_chain'/usr/lib/ruby/1.8/monitor.rb:242:in
synchronize' /usr/lib/ruby/1.8/rake.rb:590:ininvoke_with_call_chain'/usr/lib/ruby/1.8/rake.rb:583:in
invoke' /usr/lib/ruby/1.8/rake.rb:2051:ininvoke_task'/usr/lib/ruby/1.8/rake.rb:2029:in
top_level' /usr/lib/ruby/1.8/rake.rb:2029:ineach'/usr/lib/ruby/1.8/rake.rb:2029:in
top_level' /usr/lib/ruby/1.8/rake.rb:2068:instandard_exception_handling'/usr/lib/ruby/1.8/rake.rb:2023:in
top_level' /usr/lib/ruby/1.8/rake.rb:2001:inrun'/usr/lib/ruby/1.8/rake.rb:2068:in
standard_exception_handling' /usr/lib/ruby/1.8/rake.rb:1998:inrun'/usr/bin/rake:28
-Andrew
The text was updated successfully, but these errors were encountered: