-
Notifications
You must be signed in to change notification settings - Fork 1.4k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Speedybee F405 Wing App - does not connect to inav-configurator software #9974
Comments
I have 2 of those SB 405W. Both are working here. Dont think its bug related |
What else could I try to find out what the problem is? |
Have you tried another computer, or connecting with your phone or pad with the speedybee app? |
I have tried it with my iPhone15 and an older Samsung Galaxy with the Speedybee APP. -> The Speedybee is found but an error message always appears when connecting. Regarding the app connection, unfortunately I cannot check UART6 to see if this is activated as I cannot establish a connection. |
hm ok. Then something could be wrong with the flightcontroller. Have you tried to flash Betaflight or an older firmware? |
I haven't tried Betaflight yet, I will definitely do that and give feedback! |
Well thats great. If you get Betaflight to work maybe a developer here can help you since they are quite alike |
I have now connected the Speedybee to Betaflight via DFU using a USB cable and installed the firmware file "betaflight_4.5.0_STM32F405.hex". The connection works but no "data" is displayed and I can't set almost anything: Addition: @Thidsa: Do you have INAV up on both your SP F405 Wing? |
Kind of great that you could connect. I just checked and on the speedybee page they say that there is no betaflight target for the wing board. So i've guess you flashed the target for 405 stack board for multirotors. Yes have latest inav on both sb 405 wing here. |
And if you then could connect, maybe at the same time load a dump or diff from me |
Ok. Sorry was a typo. Cloud should be Could. |
I have been in contact with Speedybee Support for several days. Does anyone have any ideas on how I can rule out further errors on my part or how I should continue testing? |
Steps to Reproduce
2024-04-25 @ 06:14:57 -- Verbunden mit: COM4
2024-04-25 @ 06:14:57 -- MSP-Verbindung erfolgreich geöffnet mit ID: 1
2024-04-25 @ 06:15:07 -- Keine Konfiguration innerhalb von 10 Sekunden erhalten, Kommunikation fehlgeschlagen
2024-04-25 @ 06:15:07 -- MSP-Verbindung erfolgreich geschlossen
8.1 manuell heruntergeladene Firmware "inav_7.1.0_SPEEDYBEEF405WING.hex" ausgewählt
8.2 SPEEDYBEEF405WING ausgewählt und Firmware 7.1
Connect button klicken -> Fehlermeldung:
2024-04-25 @ 06:14:57 -- Verbunden mit: COM4
2024-04-25 @ 06:14:57 -- MSP-Verbindung erfolgreich geöffnet mit ID: 1
2024-04-25 @ 06:15:07 -- Keine Konfiguration innerhalb von 10 Sekunden erhalten, Kommunikation fehlgeschlagen
2024-04-25 @ 06:15:07 -- MSP-Verbindung erfolgreich geschlossen
Expected behavior
It should connect to the FC and the properties/options should appear so that I can set the FC.
Proposed solution(s)
If this is a bug, fix it please.
Additional context
Unfortunately I can't get to the CLI tab.
The text was updated successfully, but these errors were encountered: