-
Notifications
You must be signed in to change notification settings - Fork 1.4k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Servos won't initiate #10057
Comments
Just to confirm, are you moving the same servo to a different set of pins? Or testing with a different servo? Also, can we please see a screenshot of your mixer and a pic of which pins don't work? |
Solved. I reversed rudder channel on the radio. All working now. |
Reversing a channel on the radio will create some issues, which you may or may not run into. Unless it was already reversed and you unreversed it. If it's moving the wrong way, it should be reversed on the output tab, or in the mixer. Remember that rudder isn't controlled by that radio channel, except in manual mode (passthrough). And that radio channel doesn't mean rudder. It means different things in different modes. Consider as a simple example any navigation mode. If the plane needs to turn right, do you want it applying left rudder? |
All servos won't initiate ulness I unplug the rudder servo, then the remaining work. Once plug it back in all fail to respond again. ESC motor runs regardless once armed. If I switch out the rudder servo to another set of servo pins with another servo all work (just Tx sticks move wrong surfaces of course)
Servos test OK.
INav Mixer moving with sticks regardless of rudder plus
What could be the issue?
Thanks in advance.
Build : fixed wing (full tail, separate flaps), matek f405-wing v2, with spectrum ESC (spmxae1060 smart esc)Tx (Spektrum NX8 8-Channel DSMX) and Rx. Rx(Spektrum SRXL2 DSMX).
The text was updated successfully, but these errors were encountered: