/
hardware-mapping.c
287 lines (246 loc) · 8.77 KB
/
hardware-mapping.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
/* -*- mode: c; c-basic-offset: 2; indent-tabs-mode: nil; -*-
* Copyright (C) 2013, 2016 Henner Zeller <h.zeller@acm.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation version 2.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http: *gnu.org/licenses/gpl-2.0.txt>
*/
/*
* We do this in plain C so that we can use designated initializers.
*/
#include "hardware-mapping.h"
#define GPIO_BIT(b) ((uint64_t)1<<(b))
struct HardwareMapping matrix_hardware_mappings[] = {
/*
* The regular hardware mapping described in the wiring.md and used
* by the adapter PCBs.
*/
{
.name = "regular",
.output_enable = GPIO_BIT(18),
.clock = GPIO_BIT(17),
.strobe = GPIO_BIT(4),
/* Address lines */
.a = GPIO_BIT(22),
.b = GPIO_BIT(23),
.c = GPIO_BIT(24),
.d = GPIO_BIT(25),
.e = GPIO_BIT(15), /* RxD kept free unless 1:64 */
/* Parallel chain 0, RGB for both sub-panels */
.p0_r1 = GPIO_BIT(11), /* masks: SPI0_SCKL */
.p0_g1 = GPIO_BIT(27), /* Not on RPi1, Rev1; use "regular-pi1" instead */
.p0_b1 = GPIO_BIT(7), /* masks: SPI0_CE1 */
.p0_r2 = GPIO_BIT(8), /* masks: SPI0_CE0 */
.p0_g2 = GPIO_BIT(9), /* masks: SPI0_MISO */
.p0_b2 = GPIO_BIT(10), /* masks: SPI0_MOSI */
/* All the following are only available with 40 GPIP pins, on A+/B+/Pi2,3 */
/* Chain 1 */
.p1_r1 = GPIO_BIT(12),
.p1_g1 = GPIO_BIT(5),
.p1_b1 = GPIO_BIT(6),
.p1_r2 = GPIO_BIT(19),
.p1_g2 = GPIO_BIT(13),
.p1_b2 = GPIO_BIT(20),
/* Chain 2 */
.p2_r1 = GPIO_BIT(14), /* masks TxD when parallel=3 */
.p2_g1 = GPIO_BIT(2), /* masks SCL when parallel=3 */
.p2_b1 = GPIO_BIT(3), /* masks SDA when parallel=3 */
.p2_r2 = GPIO_BIT(26),
.p2_g2 = GPIO_BIT(16),
.p2_b2 = GPIO_BIT(21),
},
/*
* This is used if you have an Adafruit HAT in the default configuration
*/
{
.name = "adafruit-hat",
.output_enable = GPIO_BIT(4),
.clock = GPIO_BIT(17),
.strobe = GPIO_BIT(21),
.a = GPIO_BIT(22),
.b = GPIO_BIT(26),
.c = GPIO_BIT(27),
.d = GPIO_BIT(20),
.e = GPIO_BIT(24), /* Needs manual wiring, see README.md */
.p0_r1 = GPIO_BIT(5),
.p0_g1 = GPIO_BIT(13),
.p0_b1 = GPIO_BIT(6),
.p0_r2 = GPIO_BIT(12),
.p0_g2 = GPIO_BIT(16),
.p0_b2 = GPIO_BIT(23),
},
/*
* An Adafruit HAT with the PWM modification
*/
{
.name = "adafruit-hat-pwm",
.output_enable = GPIO_BIT(18), /* The only change compared to above */
.clock = GPIO_BIT(17),
.strobe = GPIO_BIT(21),
.a = GPIO_BIT(22),
.b = GPIO_BIT(26),
.c = GPIO_BIT(27),
.d = GPIO_BIT(20),
.e = GPIO_BIT(24),
.p0_r1 = GPIO_BIT(5),
.p0_g1 = GPIO_BIT(13),
.p0_b1 = GPIO_BIT(6),
.p0_r2 = GPIO_BIT(12),
.p0_g2 = GPIO_BIT(16),
.p0_b2 = GPIO_BIT(23),
},
/*
* The regular pin-out, but for Raspberry Pi1. The very first Pi1 Rev1 uses
* the same pin for GPIO-21 as later Pis use GPIO-27. Make it work for both.
*/
{
.name = "regular-pi1",
.output_enable = GPIO_BIT(18),
.clock = GPIO_BIT(17),
.strobe = GPIO_BIT(4),
/* Address lines */
.a = GPIO_BIT(22),
.b = GPIO_BIT(23),
.c = GPIO_BIT(24),
.d = GPIO_BIT(25),
.e = GPIO_BIT(15), /* RxD kept free unless 1:64 */
/* Parallel chain 0, RGB for both sub-panels */
.p0_r1 = GPIO_BIT(11), /* masks: SPI0_SCKL */
/* On Pi1 Rev1, the pin other Pis have GPIO27, these have GPIO21. So make
* this work for both Rev1 and Rev2.
*/
.p0_g1 = GPIO_BIT(21) | GPIO_BIT(27),
.p0_b1 = GPIO_BIT(7), /* masks: SPI0_CE1 */
.p0_r2 = GPIO_BIT(8), /* masks: SPI0_CE0 */
.p0_g2 = GPIO_BIT(9), /* masks: SPI0_MISO */
.p0_b2 = GPIO_BIT(10), /* masks: SPI0_MOSI */
/* No more chains - there are not enough GPIO */
},
/*
* Classic: Early forms of this library had this as default mapping, mostly
* derived from the 26 GPIO-header version so that it also can work
* on 40 Pin GPIO headers with more parallel chains.
* Not used anymore.
*/
{
.name = "classic",
.output_enable = GPIO_BIT(27), /* Not available on RPi1, Rev 1 */
.clock = GPIO_BIT(11),
.strobe = GPIO_BIT(4),
.a = GPIO_BIT(7),
.b = GPIO_BIT(8),
.c = GPIO_BIT(9),
.d = GPIO_BIT(10),
.p0_r1 = GPIO_BIT(17),
.p0_g1 = GPIO_BIT(18),
.p0_b1 = GPIO_BIT(22),
.p0_r2 = GPIO_BIT(23),
.p0_g2 = GPIO_BIT(24),
.p0_b2 = GPIO_BIT(25),
.p1_r1 = GPIO_BIT(12),
.p1_g1 = GPIO_BIT(5),
.p1_b1 = GPIO_BIT(6),
.p1_r2 = GPIO_BIT(19),
.p1_g2 = GPIO_BIT(13),
.p1_b2 = GPIO_BIT(20),
.p2_r1 = GPIO_BIT(14), /* masks TxD if parallel = 3 */
.p2_g1 = GPIO_BIT(2), /* masks SDA if parallel = 3 */
.p2_b1 = GPIO_BIT(3), /* masks SCL if parallel = 3 */
.p2_r2 = GPIO_BIT(15),
.p2_g2 = GPIO_BIT(26),
.p2_b2 = GPIO_BIT(21),
},
/*
* Classic pin-out for Rev-A Raspberry Pi.
*/
{
.name = "classic-pi1",
/* The Revision-1 and Revision-2 boards have different GPIO mappings
* on the P1-3 and P1-5. So we use both interpretations.
* To keep the I2C pins free, we avoid these in later mappings.
*/
.output_enable = GPIO_BIT(0) | GPIO_BIT(2),
.clock = GPIO_BIT(1) | GPIO_BIT(3),
.strobe = GPIO_BIT(4),
.a = GPIO_BIT(7),
.b = GPIO_BIT(8),
.c = GPIO_BIT(9),
.d = GPIO_BIT(10),
.p0_r1 = GPIO_BIT(17),
.p0_g1 = GPIO_BIT(18),
.p0_b1 = GPIO_BIT(22),
.p0_r2 = GPIO_BIT(23),
.p0_g2 = GPIO_BIT(24),
.p0_b2 = GPIO_BIT(25),
},
#ifdef ENABLE_WIDE_GPIO_COMPUTE_MODULE
/*
* Custom pin-out for compute-module
*/
{
.name = "compute-module",
/* This GPIO mapping is made for the official I/O development
* board. No pin is left free when using 6 parallel chains.
*/
.output_enable = GPIO_BIT(18),
.clock = GPIO_BIT(16),
.strobe = GPIO_BIT(17),
.a = GPIO_BIT(2),
.b = GPIO_BIT(3),
.c = GPIO_BIT(4),
.d = GPIO_BIT(5),
.e = GPIO_BIT(6), /* RxD kept free unless 1:64 */
/* Chain 0 */
.p0_r1 = GPIO_BIT(7),
.p0_g1 = GPIO_BIT(8),
.p0_b1 = GPIO_BIT(9),
.p0_r2 = GPIO_BIT(10),
.p0_g2 = GPIO_BIT(11),
.p0_b2 = GPIO_BIT(12),
/* Chain 1 */
.p1_r1 = GPIO_BIT(13),
.p1_g1 = GPIO_BIT(14),
.p1_b1 = GPIO_BIT(15),
.p1_r2 = GPIO_BIT(19),
.p1_g2 = GPIO_BIT(20),
.p1_b2 = GPIO_BIT(21),
/* Chain 2 */
.p2_r1 = GPIO_BIT(22),
.p2_g1 = GPIO_BIT(23),
.p2_b1 = GPIO_BIT(24),
.p2_r2 = GPIO_BIT(25),
.p2_g2 = GPIO_BIT(26),
.p2_b2 = GPIO_BIT(27),
/* Chain 3 */
.p3_r1 = GPIO_BIT(28),
.p3_g1 = GPIO_BIT(29),
.p3_b1 = GPIO_BIT(30),
.p3_r2 = GPIO_BIT(31),
.p3_g2 = GPIO_BIT(32),
.p3_b2 = GPIO_BIT(33),
/* Chain 4 */
.p4_r1 = GPIO_BIT(34),
.p4_g1 = GPIO_BIT(35),
.p4_b1 = GPIO_BIT(36),
.p4_r2 = GPIO_BIT(37),
.p4_g2 = GPIO_BIT(38),
.p4_b2 = GPIO_BIT(39),
/* Chain 5 */
.p5_r1 = GPIO_BIT(40),
.p5_g1 = GPIO_BIT(41),
.p5_b1 = GPIO_BIT(42),
.p5_r2 = GPIO_BIT(43),
.p5_g2 = GPIO_BIT(44),
.p5_b2 = GPIO_BIT(45),
},
#endif
{0}
};