Skip to content

Releases: hathach/tinyusb

0.16.0

24 Nov 16:40
1eb6ce7
Compare
Choose a tag to compare

0.16.0

  • New controller driver: MAX3421e (usb host shield), rusb2 (Renesas USB2.0), ChipIdea fullspeed
  • New MCUs: MCXn9, nRF5340, STM32: G0, G4, L5, U575, U5A5, RA6m5, CH32F20x
  • Add initial TypeC PowerDelivery support with STM32G4
  • Remove submodules and use python script to manage repo dependencies #1947
  • Add CMake support for most families and boards, move build file from tools/ to examples/build_system
  • Add ETM trace support with JTrace for nrf52840, nrf5340, mcb1857, stm32h743eval, ra6m5
  • [osal] Make it possible to override the osal_task_delay() in osal_none
  • Add CDC+UAC2 composite device example
  • Enhance Hardware-in-the-loop (HIL) testing with more boards: rp2040, stm32l412nucleo, stm32f746disco, lpcxpresso43s67

Controller Driver (DCD & HCD)

  • Add new ISO endpoint API: dcd_edpt_iso_alloc() and dcd_edpt_iso_activate()

  • Remove legacy driver st/synopsys

  • EHCI

    • [iMXRT] Add dache clean/invalidate when memory is in cacheable memory
    • Fix portsc write issue which cause problem with enumeration
    • Fix an issue when doing port reset write to portsc
    • Fix port change detect is not recognized when power on with attached device
    • Fix xfer failed with disconnected device as stalled
    • Fix error on EHCI causes xfer error in non-queued qhd which cause memory fault
    • Un-roll recursive hub removal with usbh queue
    • Fix issue when removing queue head
    • Implement hcd_edpt_abort_xfer()
    • use standard USB complete interrupt instead of custom chipidea async/period interrupt to be more compatible with other ehci implementation
    • refactor usb complete & error isr processing, merge, update. Fix EHCI QHD reuses QTD on wrong endpoint
    • Improve bus reset, fix send_setup() not carried out if halted previously
    • Fix clear qhd halted bit if not caused by STALL protocol to allow for next transfer
  • ChipIdea Highspeed

    • Fix control transfer issue when previous status and new setup complete in the same isr frame
    • [imxrt] Add dcache support for cache region
  • ChipIdea Fullspeed

    • Generalize ChipIdea Fullspeed driver for mcxn9 (port 0), kinetis
  • nrf

    • Fix DMA race condition with ISO OUT transfer #1946
    • Add support for nRF5340 with pca10095 board
  • Renesas rusb2

    • Generalize rusb2 driver for ra, rx mcus
    • rework both dcd and hcd for better multiple ports support
    • Add support for board with HS USB port: ra6m5 port1
  • rp2040

    • [dcd] Make writes to SIE_CTRL aware of concurrent access
    • [hcd] add hcd_frame_number(), hcd_edpt_abort_xfer() for pio-usb host
  • stm32 fsdev:

    • Add STM32L5 support
    • Implement dcd_edpt_iso_alloc() and dcd_edpt_iso_activate()
  • OHCI

    • Allows configurable root hub ports, handles SMM mode (Ref OHCI spec 5.1.1.3.3) and Bios mode (Ref OHCI spec 5.1.1.3.4)
    • Fix FrameIntervalToggle must be toggled after we write the FrameInterval (Ref OHCI Spec 7.3.1)
    • Wait PowerOnToPowerGoodTime after we enable power of the RH ports (Ref OHCI Spec 7.4.1)
    • Generate port interrupts for devices already connected during init.
    • Fix issue when removing queue head
    • Disable MIE during IRQ processing and clear HccaDoneHead on completion as per OCHI Spec Page 80

Device Stack

  • Add optional hooks tud_event_hook_cb()

  • Audio (UAC2)

    • Fix feedback EP buffer alignment.
    • Fix encoding, update example
    • Improve IN transfer
  • Bluetooth

    • Add historical EP compatibility for Bluetooth HCI
  • CDC

    • Fix line_coding alignment
    • Fix typo in cdc line coding enum
  • MIDI

    • Fix stream_write() always writes system messages to cable 0
    • Fix incorrect NOTE_ON, NOTE_OFF definitions
  • USBTMC: Fix tmc488 bit order

  • Vendor: fix read()/write() race condition

  • Video (UVC)

    • Add the capability for video class to handle a bulk endpoint in the streaming interface.

Host Stack

  • USBH

    • Add new APIs: tuh_interface_set(), tuh_task_event_ready(), tuh_edpt_abort_xfer(), tuh_rhport_reset_bus(), tuh_rhport_is_active()
    • Fix issue when device generate multiple attach/detach/attach when plugging in
    • Prefer application callback over built-in driver on transfer complete event
    • Correct hcd_edpt_clear_stall() API signature
    • Separate bus reset delay and contact debouncing delay in enumeration
    • Support usbh_app_driver_get_cb() for application drivers
    • Fix usbh enumeration removal race condition
    • Add optional hooks tuh_event_hook_cb()
  • CDC

    • Breaking: change tuh_cdc_itf_get_info() to use tuh_itf_info_t instead of tuh_cdc_info_t
    • Fix cdc host enumeration issue when device does not support line request
    • Add support for vendor usb2uart serial: ftdi, cp210x, ch9102f
    • Improve sync control API e.g tuh_cdc_set_control_line_state(), tuh_cdc_set_line_coding()
  • HID

    • Add new APIs tuh_hid_send_report(), tuh_hid_itf_get_info(), tuh_hid_receive_ready(), tuh_hid_send_ready(), tuh_hid_set_default_protocol()
    • Change meaning of CFG_TUH_HID to total number of HID interfaces supported. Previously CFG_TUH_HID is max number of interfaces per device which is rather limited and consume more resources than needed.
  • HUB

    • Fix handling of empty "status change" interrupt
    • Fix issue with hub status_change is not aligned
  • MSC

    • Fix bug in tuh_msc_ready()
    • Fix host msc get maxlun not using aligned section memory

What's Changed

0.15.0

10 Feb 10:40
86c416d
Compare
Choose a tag to compare
  • Add codespell to detect typo
  • Add support for fuzzing and bagde for oss-fuzz
  • [osal]
    • Allow the use of non-static allocation for FreeRTOS
    • Fix FreeRTOS wrong task switch in some cases
  • Fix tu_fifo memory overflown when repeatedly write to overwritable fifo (accumulated more than 2 depths)
  • Better support for IAR (ARM) with ci build check for stm32 mcus.
  • Fix Windows build for some mingw gnu make situations

Controller Driver (DCD & HCD)

  • Add new port support (WIP) for WCH CH32V307 USB Highspeed
  • Add new port support (WIP) for PIC32MM/MX & PIC24
  • [nRF]
    • Fix endpoint internal state when closed
    • Fix reception of large ISO packets
  • [rp2040]
    • [dcd] Implement workaround for Errata 15. This enable SOF when bulk-in endpoint is in use and reduce its bandwidth to only 80%
    • [hcd] Fix shared irq slots filling up when hcd_init() is called multiple times
    • [hcd] Support host bulk endpoint using hw "interrupt" endpoint. Note speed limit is 64KB/s
  • [samd][dcd] Add support for ISO endpoint
  • [dwc2][dcd] Add support for stm32u5xx
  • [esp32sx] Fix Isochronous transfers only transmitted on even frame
  • [lpc_ip3511][dcd] Add isochronous support and fix endpoint accidental write
  • [ft90x] Improve and enhance support for FT9xx MCU, tested with more examples

Device Stack

  • [Video]
    • Add support for MJPEG
    • Fix probe on macOS
  • [MIDI]
    • Support port name strings
    • fix MS Header wTotalLength computation
  • [HID]
    • Add FIDO descriptor template
    • change length in tud_hid_report_complete_cb() from uint8 to uint16
  • [CDC]
    • Fix autoflush for FIFO < MPS
    • Fix tx fifo memory overflown when DTR is not set and tud_cdc_write() is called repeatedly with large enough data
  • [USBTMC] Fix packet size with highspeed

Host Stack

  • Retry a few times with transfers in enumeration since device can be unstable when starting up
  • [MSC] Rework host masstorage API. Add new host/msc_file_explorer example
  • [CDC]
    • Add support for host cdc
    • Fix host cdc with device without IAD e.g Arduino Due

What's Changed

New Contributors

0.14.0

23 Aug 06:19
9e91b02
Compare
Choose a tag to compare
  • Improve compiler support for CCRX and IAR
  • Add timeout to osal_queue_receive()
  • Add tud_task_ext(timeout, in_isr) as generic version of tud_task(). Same as tuh_task_ext(), tuh_task()
  • Enable more warnings -Wnull-dereference -Wuninitialized -Wunused -Wredundant-decls -Wconversion
  • Add new examples
    • host/bare_api to demonstrate generic (app-level) enumeration and endpoint transfer
    • dual/host_hid_to_device_cdc to run both device and host stack concurrently, get HID report from host and print out to device CDC. This example only work with multiple-controller MCUs and rp2040 with the help of pio-usb as added controller.

Controller Driver (DCD & HCD)

  • Enhance rhports management to better support dual roles
    • CFG_TUD_ENABLED/CFG_TUH_ENABLED, CFG_TUD_MAX_SPEED/CFG_TUH_MAX_SPEED can be used to replace CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE
    • tud_init(rphort), tuh_init(rhport) can be used to init stack on specified roothub port (controller) instead of tusb_init(void)
  • Add dcd/hcd port specific defines TUP_ (stand for tinyusb port-specific)
  • [dwc2]
    • Update to support stm32 h72x, h73x with only 1 otg controller
    • Fix overwrite with grstctl when disable endpoint
  • [EHCI] Fix an issue with EHCI driver
  • [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0
  • [nrf5x] Fix DMA access race condition using atomic function
  • [pic32] Fix PIC32 santiy
  • [rp2040]
    • Add PICO-PIO-USB as controller (device/host) support for rp2040
    • Use shared IRQ handlers, so user can also hook the USB IRQ
    • Fix resumed signal not reported to device stack
  • [stm32fsdev] Add support for stm32wb55

Device Stack

  • [Audio] Add support for feedback endpoint computation
    • New API tud_audio_feedback_params_cb(), tud_audio_feedback_interval_isr().
    • Supported computation method are: frequency with fixed/float or power of 2. Feedback with fifo count is not yet supported.
    • Fix nitfs (should be 3) in TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR
    • Fix typo in audiod_rx_done_cb()
  • [DFU] Fix coexistence with other interfaces BTH, RNDIS
  • [MSC] Fix inquiry response additional length field
  • [Venndor] Improve write performance

Host Stack

  • Add new API tuh_configure(rhport, cfg_id, cfg_param) for dynamnic port specific behavior configuration
  • [HID] Open OUT endpoint if available
  • [Hub] hub clear port and device interrupts
  • [USBH] Major improvement
    • Rework usbh control transfer with complete callback. New API tuh_control_xfer() though still only carry 1 usbh (no queueing) at a time.
    • Add generic endpoint transfer with tuh_edpt_open(), tuh_edpt_xfer(). Require CFG_TUH_API_EDPT_XFER=1
    • Support app-level enumeration with new APIs
      • tuh_descriptor_get(), tuh_descriptor_get_device(), tuh_descriptor_get_configuration(), tuh_descriptor_get_hid_report()
      • tuh_descriptor_get_string(), tuh_descriptor_get_manufacturer_string(), tuh_descriptor_get_product_string(), tuh_descriptor_get_serial_string()
      • Also add _sync() as sync/blocking version for above APIs

What's Changed

0.13.0

23 Feb 06:28
fa895ed
Compare
Choose a tag to compare
  • [tu_fifo] Fix locked mutex when full, and return type in peek_n()

Controller Driver (DCD & HCD)

  • [DWC2] Generalize synopsys dwc2 with synopsys/dwc2 which support both FS and HS phy (UTMI and ULPI) for various MCUs.
    • Broadcom 28/27xx on raspberrypi SBC
    • Silicon Labs EFM32
    • Espressif ESP32 Sx
    • GigaDevice GD32
    • ST STM32
    • Infineon XMC
  • [KL25] Add new HCD for NXP KL25
  • [MUSB] Add new DCD and HCD for Mentor musb with TI MSP432E4
  • [F1C100s] Add new DCD for Allwinner F1C100s family
  • [PIC32MZ] Add new DCD for PIC32MZ
  • [nRF] Fix/Enhance varous race condtion with: EASY DMA, request HFXO, EPOUT
  • [ChipIdea] rename Transdimension to more popular ChipIdea Highspeed,
  • [RP2040] various update/fix for hcd/dcd
  • [FT9XX] new DCD port for Bridgetek FT90x and FT93x devices
  • [DA1469X] Fix resume
  • [OHCI] Fix device array out of bound

Note: legacy drivers such as st/synopsys, nxp/transdimension are still present in this release but won't recieve more update and could be removed in the future.

Device Stack

  • [Audio] Support disabling feedback format correction (16.16 <-> 10.14 format)
  • [MSC] Add tud_msc_request_sense_cb() callback, change most default sense error to medium not present (0x02, 0x3A, 0x00)
  • [Video] Fix video_capture example fails enumeration when 8FPS

Host Stack

No notable changes

What's Changed

New Contributors

0.12.0

19 Oct 09:11
4bfab30
Compare
Choose a tag to compare
  • add CFG_TUSB_OS_INC_PATH for os include path

Device Controller Driver (DCD)

  • Getting device stack to pass USB Compliance Verification test (chapter9, HID, MSC). Ports are tested:
    nRF, SAMD 21/51, rp2040, stm32f4, Renesas RX, iMXRT, ESP32-S2/3, Kinetic KL25/32, DA146xx
  • Added dcd_edpt_close_all() for switching configuration
  • [Transdimension] Support dcd_edpt_xfer_fifo() with auto wrap over if fifo buffer is 4K aligned and size is multiple of 4K.
  • [DA146xx] Improve vbus, reset, suspend, resume detection, and remote wakeup.

Device Stack

  • Add new network driver Network Control Model (CDC-NCM), update net_lwip_webserver to work with NCM (need re-configure example)
  • Add new USB Video Class UVC 1.5 driver and video_capture example ((work in progress)
  • Fix potential buffer overflow for HID, bluetooth drivers

Host Controller Driver (HCD)

No notable changes

Host Stack

No notable changes

0.11.0

30 Aug 09:26
Compare
Choose a tag to compare
  • Add host/hid_controller example: only worked/tested with Sony PS4 DualShock controller
  • Add device/hid_boot_interface example
  • Add support for Renesas CCRX toolchain for RX mcu

Device Controller Driver (DCD)

  • Add new DCD port for SAMx7x (E70, S70, V70, V71)
  • Add new mcu K32L2Bxx
  • Add new mcu GD32VF103
  • Add new mcu STM32l151
  • Add new mcu SAML21
  • Add new mcu RX65n RX72n
  • Fix NUC120/121/126 USBRAM can only be accessed in byte manner. Also improve set_address & disable sof
  • Add Suspend/Resume handling for Renesas RX family.
  • Fix DA1469x no VBUS startup

Synopsys
^^^^^^^^

  • Fix Synopsys set address bug which could cause re-enumeration failed
  • Fix for dcd_synopsys driver integer overflow in HS mode (issue #968)

nRF5x
^^^^^

  • Add nRF5x suspend, resume and remote wakeup
  • Fix nRF5x race condition with TASKS_EP0RCVOUT

RP2040
^^^^^^

  • Add RP2040 suspend & resume support
  • Implement double buffer for both host and device (#891). Howver device EPOUT is still single bufferred due to techinical issue with short packet

Device Stack

USBD
^^^^

  • Better support big endian mcu
  • Add tuh_inited() and tud_inited(), will separte tusb_init/inited() to tud/tuh init/inited
  • Add dcd_attr.h for defining common controller attribute such as max endpoints

Bluetooth
^^^^^^^^^

  • Fix stridx error in descriptor template

DFU
^^^

  • Enhance DFU implementation to support multiple alternate interface and better support bwPollTimeout
  • Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU

HID
^^^

  • Fix newline usage keyboard (ENTER 0x28)
  • Better support Hid Get/Set report
  • Change max gamepad support from 16 to 32 buttons

MIDI
^^^^

  • Fix midi available
  • Fix midi data
  • Fix an issue when calling midi API when not enumerated yet

UAC2
^^^^

  • Fix bug and enhance of UAC2

Vendor
^^^^^^

  • Fix vendor fifo deadlock in certain case
  • Add tud_vendor_n_read_flush

Host Controller Driver (HCD)

RP2040
^^^^^^

  • Implement double bufferred to fix E4 errata and boost performance
  • Lots of rp2040 update and enhancment

Host Stack

  • Major update and rework most of host stack, still needs more improvement
  • Lots of improvement and update in parsing configuration and control
  • Rework and major update to HID driver. Will default to enable boot interface if available
  • Sepearate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB for better management and reduce SRAM usage

0.10.1 - 2021.06.03

02 Jun 18:31
d49938d
Compare
Choose a tag to compare
  • rework rp2040 examples and CMake build, allow better integration with pico-sdk

Host Controller Driver (HCD)

  • Fix rp2040 host driver: incorrect PID with low speed device with max packet size of 8 bytes
  • Improve hub driver
  • Remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer()
  • Use hcd_frame_number() instead of micro frame
  • Fix OHCI endpoint address and xferred_bytes in xfer complete event

0.10.0 - 2021.05.28

28 May 10:25
Compare
Choose a tag to compare
  • Rework tu_fifo_t with separated mutex for read and write, better support DMA with read/write buffer info. And constant address mode
  • Improve audio_test example and add audio_4_channel_mic example
  • Add new dfu example
  • Remove pico-sdk from submodule

Device Controller Driver (DCD)

  • Add new DCD port for Silabs EFM32GG12 with board Thunderboard Kit (SLTB009A)
  • Add new DCD port Renesas RX63N, board GR-CITRUS
  • Add new (optional) endpoint API dcd_edpt_xfer_fifo
  • Fix build with nRF5340
  • Fix build with lpc15 and lpc54
  • Fix build with lpc177x_8x
  • STM32 Synopsys: greatly improve Isochronous transfer with edpt_xfer_fifo API
  • Support LPC55 port1 highspeed
  • Add support for Espressif esp32s3
  • nRF: fix race condition that could cause drop packet of Bulk OUT transfer

USB Device Driver (USBD)

  • Add new (optional) endpoint ADPI usbd_edpt_xfer_fifo

Device Class Driver

CDC

  • [Breaking] tud_cdc_peek(), tud_vendor_peek() no longer support random offset and dropped position parameter.

DFU

  • Add new DFU 1.1 class driver (WIP)

HID

  • Fix keyboard report descriptor template
  • Add more hid keys constant from 0x6B to 0xA4
  • [Breaking] rename API
    • HID_PROTOCOL_NONE/KEYBOARD/MOUST to HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE
    • tud_hid_boot_mode() to tud_hid_get_protocol()
    • tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb()

MIDI

  • Fix MIDI buffer overflow issue
  • [Breaking] rename API
    • Rename tud_midi_read() to tud_midi_stream_read()
    • Rename tud_midi_write() to tud_midi_stream_write()
    • Rename tud_midi_receive() to tud_midi_packet_read()
    • Rename tud_midi_send() to tud_midi_packet_write()

Host Controller Driver (HCD)

  • No noticable changes

USB Host Driver (USBH)

  • No noticable changes

Host Class Driver

  • HID: Rework host hid driver, basically everything changes

0.9.0 - 2021.03.12

12 Mar 08:16
3a27a94
Compare
Choose a tag to compare

Device Stack

Device Controller Driver (DCD)

RP2040

  • Fix endpoint buffer reallocation overrun problem
  • Fix osal_pico queue overflow in initialization
  • Fix Isochronous endpoint buffer size in transfer
  • Optimize hardware endpoint struct to reduce RAM usage
  • Fix enum walkaround forever check for SE0 when pull up is disabled

Sony CXD56

  • Pass the correct speed on Spresense
  • Fix setup processed flag

NXP Transdimention

  • Update dcd_init() to reset controller to device mode

USB Device Driver (USBD)

  • Fix issue with status zlp (tud_control_status) is returned by class driver with SET/CLEAR_FEATURE for endpoint.
  • Correct endpoint size check for fullspeed bulk, can be 8, 16, 32, 64
  • Ack SET_INTERFACE even if it is not implemented by class driver.

Device Class Driver

DFU Runtime

  • rename dfu_rt to dfu_runtime for easy reading

CDC

  • Add tud_cdc_send_break_cb() to support break request
  • Improve CDC receive, minor behavior changes: when tud_cdc_rx_wanted_cb() is invoked wanted_char may not be the last byte in the fifo

HID

  • [Breaking] Add itf argument to hid API to support multiple instances, follow API has signature changes
    • tud_hid_descriptor_report_cb()
    • tud_hid_get_report_cb()
    • tud_hid_set_report_cb()
    • tud_hid_boot_mode_cb()
    • tud_hid_set_idle_cb()
  • Add report complete callback tud_hid_report_complete_cb() API
  • Add DPad/Hat support for HID Gamepad
    • TUD_HID_REPORT_DESC_GAMEPAD() now support 16 buttons, 2 joysticks, 1 hat/dpad
    • Add hid_gamepad_report_t along with GAMEPAD_BUTTON_ and GAMEPAD_HAT_ enum
    • Add Gamepad to hid_composite / hid_composite_freertos example

MIDI

  • Fix dropping MIDI sysex message when fifo is full
  • Fix typo in tud_midi_write24(), make example less ambigous for cable and channel
  • Fix incorrect endpoint descriptor length, MIDI v1 use Audio v1 which has 9-byte endpoint descriptor (instead of 7)

Host Stack

Host Controller Driver (HCD)

  • Add rhport to hcd_init()
  • Improve EHCI/OHCI driver abstraction
    • Move echi/ohci files to portable/
    • Rename hcd_lpc18_43 to hcd_transdimension
    • Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr()
  • Update NXP transdimention hcd_init() to reset controller to host mode
    • Ported hcd to rt10xx

USB Host Driver (USBH)

  • No noticeable changes to usbh

Host Class Driver

MSC

  • Rename tuh_msc_scsi_inquiry() to tuh_msc_inquiry()
  • Rename tuh_msc_mounted_cb/tuh_msc_unmounted_cb to tuh_msc_mount_cb/tuh_msc_unmount_cb to match device stack naming
  • Change tuh_msc_is_busy() to tuh_msc_ready()
  • Add read10 and write10 function: tuh_msc_read10(), tuh_msc_write10()
  • Read_Capacity is invoked as part of enumeration process
  • Add tuh_msc_get_block_count(), tuh_msc_get_block_size()
  • Add CFG_TUH_MSC_MAXLUN (default to 4) to hold lun capacities

Others

  • Add basic support for rt-thread OS
  • Change zero bitfield length to more explicit padding
  • Build example now fetch required submodules on the fly while running make without prio submodule init for mcu drivers
  • Update pico-sdk to v1.1.0

New Boards

  • Microchip SAM E54 Xplained Pro
  • LPCXpresso 55s28
  • LPCXpresso 18s37

0.8.0 - 2021.02.05

05 Feb 16:01
7b62c71
Compare
Choose a tag to compare

Device Controller Driver

  • Added new device support for Raspberry Pi RP2040
  • Added new device support for NXP Kinetis KL25ZXX
  • Use dcd_event_bus_reset() with link speed to replace bus_signal
  • ESP32-S2:
    • Add bus suspend and wakeup support
  • SAMD21:
    • Fix (walkaround) samd21 setup_packet overflow by USB DMA
  • STM32 Synopsys:
    • Rework USB FIFO allocation scheme and allow RX FIFO size reduction
  • Sony CXD56
    • Update Update Spresense SDK to 2.0.2
    • Fix dcd issues with setup packets
    • Correct EP number for cdc_msc example

USB Device

USBD

  • Rework usbd control transfer to have additional stage parameter for setup, data, status
  • Fix tusb_init() return true instead of TUSB_ERROR_NONE
  • Added new API tud_connected() that return true after device got out of bus reset and received the very first setup packet

Class Driver

  • CDC
    • Allow to transmit data, even if the host does not support control line states i.e set DTR
  • HID
    • change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64
  • MIDI
    • Fix midi sysex sending bug
  • MSC
    • Invoke only scsi complete callback after status transaction is complete.
    • Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error.
  • USBTMC
    • Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu

Example

  • Support make from windows cmd.exe
  • Add HID Consumer Control (media keys) to hid_composite & hid_composite_freertos examples

USB Host

No noticeable changes to host stack

New Boards

  • NXP/Freescale Freedom FRDM-KL25Z
  • Feather Double M33 express
  • Raspberry Pi Pico
  • Adafruit Feather RP2040
  • Adafruit Itsy Bitsy RP2040
  • Adafruit QT RP2040
  • Adfruit Feather ESP32-S2
  • Adafruit Magtag 29" Eink
  • Adafruit Metro ESP32-S2
  • Adafruit PyBadge
  • Adafruit PyPortal
  • Great Scott Gadgets' LUNA D11 & D21