-
Name: MAX7219
-
Author: Gavin Lyons.
-
Description: A Raspberry pi library to display data on a 8-digit MAX7219 seven segment module. Dynamic install-able system level Raspberry Pi C++ library. Hardware or software SPI, Shutdown mode, test mode and Brightness control supported.
Example files list:
| List No | Example file name | Description | SPI type |
|---|---|---|---|
| 1 | src/TESTS/main.cpp | test sequence | software |
| 2 | src/HELLOWORLD/main.cpp | Hello world | hardware & software user adjust |
| 3 | src/BCDMODE/main.cpp | Shows use of BCD built-in font | hardware |
| 4 | src/CLOCK_DEMO/main.cpp | Clock demo , Shows use of cascaded displays | hardware |
| 5 | src/CASCADE_DEMO/main.cpp | simple Demo showing use of cascaded displays | hardware |
For Software SPI Pick any GPIO you want. For Hardware SPI the User must use fixed SPI pins SPIMOSI and SPISCLK, user can choice between SPICE0 and SPICE1 for chip select. The Datasheet says it's a 10MHZ device, In hardware SPI user can pick SPI bus speed. In software SPI user may need to increase or decrease CommDelay variable (uS Communication delay) depending on speed of CPU on system. User can adjust brightness from 0x00 to 0x0f by default it is 0x08. 0x0f being brightest
Connections to RPI:
| Pin no | RPI SW SPI | RPI HW SPI | Pin function |
|---|---|---|---|
| 1 | any GPIO output | SPISCLK | CLK = Clock |
| 2 | any GPIO output | SPICE0 or SP1CE1 | CS = Chip select |
| 3 | any GPIO output | SPIMOSI | DIN = Data in |
VCC 5V in theory but works at 3.3V in testing, albeit with a dimmer display. Logic seems to work fine at 3.3V , It safe as it is all one way communications From RPI to MAX.
Support for Cascaded Displays added is untested as only one display available. Casacded Displays are displays connected together. Din-> Dout and CS lines tied together.