-
Made up a few of these beautiful boards and tried with two official RPi Pico H - both work fine (very excited) Then I tried with three RPi Pico RP240 clones (4M and 16M veresions, non LED) and none of them work - no sound and no config menu? all three of these boards work with the blink.uf2? what could I be doing wrong, I'm afraid my knowlege of RPi ends about here? Awesome project!! what is the difference between the LED and RGB uf2 files (where do I find that info? - sorry pretty new to github too) |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 8 replies
-
I hope you did not try the purple clones? Because they have another pinout and won't work... (flash size 4M, 16M, ... does not matter) LED = firmware that lets the status LED blink, RGB = firmware for clones with RGB LED on the PCB. |
Beta Was this translation helpful? Give feedback.
Color aside :-) -- is the pinout the same as for the original Pi Pico?
Several people experience bad build quality for the cheap clones (wrongly soldered parts, solder bridges etc), so the best thing is to also try a "blink" example to see if it works at all