digikey parts list #29
Replies: 3 comments 3 replies
-
Have you seen the BOM on the PCBWay page? It has all the data. If you're looking for alternative parts (the part numbers in the BOM are from Mouser):
|
Beta Was this translation helpful? Give feedback.
-
That is only the diode link. My cart looks like this but I think don't have the right parts yet. I copied the page and put it on my google drive here. https://photos.app.goo.gl/wFk5PyvzKnDFzdmW8 It be nice if could just click on a link to have all the parts listed there to buy. Or any link were they sell all the parts for this board? -Raymond Day |
Beta Was this translation helpful? Give feedback.
-
I got the 5 other boards they all ready had the parts on them. So I solder the pins to it. Install it on the old C=64 and I got this photo of it in the Commodore on the google photos. https://photos.app.goo.gl/UMSXq1jczH7ybaQo8 Were does a wire go for the 2nd SID for stereo I want to solder it on Pin 7 of the video port. Not sure if this old C=64 works When I plug it in the power LED did not go on. So I unsolder the 2 address pins from the board and then the power LED goes on but no video the screen turns black like it's trying. Maybe I messed it up must of solder the 2 address lines on the wrong pins on the ROM chip. I got another old Commodore 64 and will get it out to try on that but don't have time today will try tomorrow. Looks like the PLA the 906114-01 U17 went bad in this. Order a replacement from 8-Bit Classics. Thank you. -Raymond Day |
Beta Was this translation helpful? Give feedback.
-
If you go here can make a digikey parts list and then know will get the right parts. https://www.digikey.com/en/mylists/
I was doing it and it's hard to find some. I don't know if it's the right size resistors and things like that so it would be good for some one to make a list there so can just click it on to order all the parts.
Got the boards from PCB way from the link on here and I thought I order them with the parts all ready on them but I got them blank they look real good but now I have to get the parts and solder them on it.
-Raymond Day
Beta Was this translation helpful? Give feedback.
All reactions