Welcome to power-flow-card Discussions!

[flixlix]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[DBT85]

Just a quick thank you for the fork. I attempted my won but was struggling and had basically no idea what I was doing.

I know there are plenty of people out there that don't and even cant monitor gas/water usage so your fork to allow people to set up solar diverters, chargers etc is great. I doubt I'll be of any help in making changes, but I can certainly spread the word.

[DBT85]

Might it be an idea to be something like Power Flow Card+ or Power Flow Card Extended?

[flixlix]

I like that idea 👍
I already thought about "Power Flow Card Extension" but that name would probably be misleading, since people would think, you have to install the original one first. Im probably going to decide change the name to "Power Flow Card Plus"

[gjpgjp]

Been looking for this functionality for a long time. Thank you. It would be great if the "color_icon" boolean were able to be set on all icons.

[flixlix]

Currently working on it 😉
I really appreciate the support!

[flixlix]

This functionality has been added in the newest version 😊

[Vaseemes]

Thanks a lot for the great fork! I have one feature request, would it be possible to add to individual1 and 2 additional info, like state of charge or temperature (in case of water heater)?

In any case, thanks again!

[gjpgjp]

What am I doing wrong. How do I enter secondary information

individual1: entity: sensor.smart_meter_electricity_export name: Kia EV6 color_icon: true display_zero: true color:'#FF0000' icon: mdi:car-electric

[DBT85]

What am I doing wrong. How do I enter secondary information

individual1: entity: sensor.smart_meter_electricity_export name: Kia EV6 color_icon: true display_zero: true color:'#FF0000' icon: mdi:car-electric

Here is mine for you to reference. also, put your code in ``` above and below to get it to show properly. It's not an apostrophe, its the one in the top left above tab.

  individual1:
    entity: sensor.myenergi_ct_eddi_internal_load_ct1
    secondary_info:
      entity: sensor.myenergi_ct_eddi_hub_green_energy_today
      unit_of_measurement: kW
    name: Eddi
    icon: mdi:air-filter
    color: '#4293f5'
    display_zero: true

[gjpgjp]

Unfortunately, that’s not working for me. No secondary information being shown.

[DBT85]

Unfortunately, that’s not working for me. No secondary information being shown.

If you go into HACS what version does it say you are running? Latest is 0.0.9.4.

[affer]

And could it be even possible to add the possibility for secondary information to home, grid and solar.?

[stevenheff]

HI

So I have jus tinstalled and confiurged
I have an off dride system and am pulling in data to HA
I have current solar, and Bat in and out
when the bat is charging I see X coming into the house via the Solar and X coming into the Batt which seem sto get added to the house
so if I have 2kw in the pannels and and using 500w in the house I see 2kw going to the house and 1.5 also from the bat to the house as well
What I dont see in the 1.5kw going ot the batt and 500w being used n the house.

config is entities:
solar:
entity: sensor.current_generation_3
battery:
entity:
consumption: sensor.battin
production: sensor.battout
state_of_charge: sensor.soc_2
display_state: two_way

[stevenheff]

All good worked it out
I do nitice that the Batt % does not seem to show?

[shayes83]

I love this card, so thank you for the work put into it. Question and/or request: Is there a way to make the sensor data more realtime? It seems that it takes about 30s for the system to update? perhaps scan_interval: 5s ?

[flixlix]

Thank you very much for that compliment, I really do appreciate it!
Regarding the scan interval, the card updates as soon as the state of one of the entities you provided updates, meaning if your entity only updates every 30 seconds, there's really nothing that can be done about it in the frontend 😊

[shayes83]

I will see what I can come up with.... Thanks Again!

[barryperfect]

Firstly, thanks for a great power flow card! I have now migrated all my existing power cards to this one.

I have a question on the new flow formula introduced in v0.0.9.6.

I have put two cards side by side on a dashboard, one with use_new_flow_rate_model set to true and the other set to false and they both seem to look the same, no matter what power is being generated by grid, solar, battery, fossil fuel.

I am no expert, but I had a quick look at the code and I couldn’t see the use_new_flow_rate_model config actually being read and set?

As I say, I am probably wrong on the code, but would be interested to see if others have managed to get the new flow working or not

[flixlix]

Thank you very much for your support. The new formula is going to be introduced in the next version of this card. I should have only updates the readme, when the last version supports it

[barryperfect]

Ah, OK, thanks for that, thought it was just something I had configured wrongly :-)

Look forward to seeing the next version

[BeeSteady]

Hi all - loving this!
I am however having some struggles to override the home consumption with sensor.load_power. it just doesn't seem to work! ANY help would be appreciated thankS!

[flixlix]

I am glad you are liking this card!
Are you using the version 0.1beta? This feature is only available in that version and up

[ColinSainsbury]

I love the idea and intent of this card but I am struggling with the current builds. I have tried 0.0.9.6, 0.1.0b and now 0.1 release

1. I never get the UI to configure the card - I have tried HACS install and manual
2. The values should probably be Watt hours (Wh) or kilowatt hours (kWh) rather than W and kW as that is what the sensors typically measure.
3. I cannot get the values shown in the custom power flow plus card to agree with the numbers from the card provided by the Energy dashboard despite using the same sensor inputs as the dashboard.

I have included my YAML and a side by side screenshot

type: custom:power-flow-card-plus
entities:
  home:
    entity: sensor.home_consumption
    color_icon: solar
  fossil_fuel_percentage:
    entity: sensor.co2_signal_grid_fossil_fuel_percentage
    icon: mdi:leaf
    color_icon: true
    display_zero: true
    name: Low Carbon
    state_type: power
  grid:
    icon: mdi:transmission-tower
    name: Octopus
    entity:
      production: sensor.export_kwh
      consumption: sensor.daily_energy_total
      unit_of_measurement: kWh
  solar:
    entity: sensor.powerwall_solar_export
  battery:
    name: Powerwall
    entity:
      consumption: sensor.powerwall_battery_import
      production: sensor.powerwall_battery_export
  individual1:
    entity: sensor.myenergi_eddi_21491793_energy_consumed_session
    unit_of_measurement: kWh
    icon: mdi:heating-coil
    color: '#00CC44'
    name: Eddi
    color_icon: true
    display_zero: true
  individual2:
    entity: sensor.myenergi_eddi_21491793_energy_used_today
    unit_of_measurement: kWh
    icon: mdi:heat-pump-outline
    color: '#00CC44'
    name: Heat Pump
    color_icon: true
    display_zero: true
w_decimals: 0
kw_decimals: 2
min_flow_rate: 0.9
max_flow_rate: 6
watt_threshold: 1000
clickable_entities: true
title: Power Flow Card Plus

[flixlix]

This is a card for power sensors, so the unit needs to be W and not Wh. If you want to use energy sensors, you can try this new card I created: https://github.com/flixlix/energy-flow-card-plus

[Andurilll]

First i have to thank everyone who has contributed in this amazing Card

I have a idea. Now the Speed of the dots on the lines is proportional to the amount of Power.
What about a Option to Display more than one dot on one Line and then use the density(amount of points) to Display the power Flow. I guess this would feel a bit Like seeing the electrons Flow (physically correctly would be the Flow of the absence of a electrons)

What do you think about this?

[shane142142]

This is the best card I have found to display power data, is there a way to increase the size of the bubbles and text size?
I display this on a screen mounted to the wall and find its a little to small for me

[MartinWatson1]

Thank you for an excellent power flow card ive found it very useful. Would it be possible to move the two 'individuals' up to the inverter to represent the solar arrays inputting into the Inverter? I have amended the card to represent this but it would be great to move them physically from the home icon to the inverter if possible?

[edlestau]

Hi there.

Thank you for this great power card!

Can you say when version 2.0 will change from beta to official release?