x3.conf.example

/* ***************************************************************** 
 *   X3 Services Example Configuration file.
 *  
 *   Copy it to your x3 runtime dir, and edit to taste.
 * 
 * This file allows two kinds of comments.  Whitespaces between 
 * tokens are ignored.  All strings (even if they're just numbers) 
 * MUST be enclosed in double quotes.  There must be a semicolon 
 * after every * key/value pair.
 */

/* UPLINKS (servers we connect to) *********************************
 * Each subsection describes one server. X3 will try to connect to
 * each in turn maxtries times, and then will quit.
 */
"uplinks" {
    // This first entry connects to an ircd on teh same server an X3..
    "Hub" {  // This can be any string, just used here for your convenience
        "address"        "127.0.0.1";  // The IP address of the server
        "port"           "8888";       // What TCP port to connect to
        "password"       "laoo,rpe";  // Both of these passwords must match 
        "uplink_password" "laoo,rpe";  //   the one in the ircd C line for X3.
        "enabled"        "1";   // Set to 0 to disable connecting to this server
        "max_tries"      "10";  // How many times to attemt reconnect before quitting
        "bind_address"   "127.0.0.1";  // LOCAL IP address we want to connect FROM
    };
    // This next one connects to an ircd on another server
    "Hub-west" {
        // IP address and port the server listens on
        "address"        "192.168.234.123"; // IP of remote server
        "port"           "8888";
        "password"       "ekrpat";  // C line passwords
        "uplink_password" "ekrpat";  // Set same as above
        "enabled"        "0"; // Set this to 1 to use this server..
        "max_tries"      "1";
        "bind_address"   "192.168.1.10";
    };
};

/* SERVER (Details about our existance) **********************************
 */
"server" {
    "hostname" "X3.AfterNET.Services";  // The servers name. (Use this in the ircd's C line)
    "description" "AfterNET Network Services"; // Shows up in /links.
    "network" "AfterNET";
    "hidden_host" "Users.AfterNET.Org"; // set this if you enabled Nefarious' +x mode
    /* hidden_host should match the F:HIDDEN_HOST: line in your ircu's ircd.conf;
     * x3 does not set the host suffix for users, but must know it when making
     * things like bans, where it should not show the user's real hostname. */
    "hidden_host_type" "1"; // change this to 2 if you use Nefarious's style 2 host hiding.
    "key1" "45432"; // Set these key values to the network KEY values you use
    "key2" "76934"; // for host hiding style 2. If you are using Nefarious 1.3.0 (type 8)
    "key3" "98336"; // then these are ignored.
    "prefix" "AfterNET"; // If you use style 2 then this is the name that is prefixed to hosts.
    "numeric" "51"; // hint: If you get collisions on link, CHANGE THIS.
    /* Type handles some changes in Nefarious from version to version.
     * 4 - nefarious 0.4.x and other ircds
     * 5 - nefarious 1.0.x and higher (Obselete)
     * 6 - nefarious 1.1.0 and higher (Obselete)
     * 7 - nefarious 1.2.0 and higher (Obselete)
     * 8 - nefarious 1.3.0 and higher (Legacy Version)
     * 9 - nefarious 2.0.x and higher (Current Version)
     */
    "type" "8";
    "host_in_topic" "1"; //Set to 1 if your Nefarious server have the HOST_IN_TOPIC F:line set to TRUE.
    "max_users" "256"; // You can save a little memory by setting this to a lower value.
    "force_n2k" "1"; // Use extended (5-digit) numnick for self, even if 3 are possible.
    "ping_freq" "60";
    "ping_timeout" "90";
    "max_cycles" "30"; // max uplink cycles before giving up
    // Admin information is traditionally: location, location, email
    // This shows up on a /admin x3.afternet.services command.
    "admin" (
         "AfterNET IRC Network", 
         "www.afternet.org", 
         "Support Staff <support@afternet.org>"
    );
    /* extended_accounts -
     * enable this for nefarious 0.4.x and higher and in ircd.conf add F:EXTENDED_ACCOUNTS:TRUE. 
     * Sends 'AC R nick account' instead of 'AC nick account' and allows 
     * for renames, login-on-connect,  etc.  If you use stock ircu set to 0. */
    "extended_accounts" "1";

    /* the following two settings are for ircu's HEAD_IN_SAND features, and are equivelent to
     * the F: lines in ircu's ircd.conf. both can be disabled by commenting them out. */
    //"his_servername" "*.AfterNET.org"; // hidden server name, shown in remote /whois requests
    //"his_servercomment" "AfterNET IRC Network";
};

/* SERVICES (Bot nicknames) *******************************************
 * Each section describes one service nickname and the details of that
 * bot's features
 *  You may disable a service by commenting out its "nick" config item.
 */
"services" {
    /* Nickserv is the bot you register with and auth to.
     * Afternet uses the name "Authserv" without the nickname reservation
     * features enabled. Some nets call it Nickserv and configure it to 
     * reserve nicks.
     */
    "nickserv" {
        "nick" "AuthServ";  // The bots nick on IRC

        // If you want to have *@* as the default hostmask, set
        // default_hostmask. I highly reccomend this, and its required
        // for login-on-connect to work.
        "default_hostmask" "1";

        // do we warn users when someone new auths to their account?
        "warn_clone_auth" "1"; // -X3- warning: foobar has authed to your account

        // default max number of logins allowed on new accounts. Users can set it
        // to something different using authserv commands.
        "default_maxlogins" "3";
        
        // hard_maxlogins is the ammount the user cant override.
        "hard_maxlogins" "10";

        //automatically set the following modes when opers auth:
        // - if it includes o, then are auto remote-opered.
        "auto_oper" "+oxwgs";
        "auto_oper_privs" "CHAN_LIMIT SHOW_INVIS SHOW_ALL_INVIS KILL LOCAL_KILL REHASH RESTART DIE JUPE LOCAL_JUPE OPMODE WHOX SEE_CHAN PROPAGATE DISPLAY SEE_OPERS WIDE_GLINE FORCE_OPMODE REMOTEREHASH CHECK SEE_SECRET_CHAN WIDE_SHUN WIDE_ZLINE LIST_CHAN";

        // This names a file that contains easily guessed passwords.
        // It always contains "password", "<password>" and the user's
        // account name.
        // uncomment if you have a dict file.
         //"dict_file" "/usr/share/dict/words";

        // Minimum number of various types of characters permitted in
        // a password. Authserv will enforce these.
        "password_min_length" "4";
        "password_min_digits" "0";
        "password_min_upper" "0";
        "password_min_lower" "0";
        
        // What should valid account and nicks look like?
        // If valid_nick_regex is omitted, valid_account_regex is used
        // for both nicks and accounts.
        // Be very carefull changing these. This default is 
        // basically limited to letters, numbers, dash and underscore.
        "valid_account_regex" "^[-_a-z0-9A-Z]{2,15}$";
        "valid_nick_regex" "^[-_a-z][-_a-z0-9]*$";

        // Whats a valid hostname look like for fakehosts?
        "valid_fakehost_regex" "^[-_a-zA-Z0-9.]+$";

        // Force account names to lowercase? 1=yes 0=no
        //   WARNING: this will convert when reading them from the db, too.
        "force_handles_lowercase" "0";

        // "Nickserv" networks, set this to 0. "Authserv" networks,
        // set it to 1.
        "disable_nicks" "1"; 
            // One account may only own this many nicks.
            "nicks_per_account" "4";

            // Send a warning when someone uses a registered nick?
            "warn_nick_owned" "0";

            // What to do when someone uses the NickServ "reclaim" command?
            // This can be one of "none", "warn", "svsnick", or "kill", but
            // stock ircu does not support svsnick -- you need nefarious.
            "reclaim_action" "none";

            // What (else) to do when someone uses a registered nick?
            // This can be anything "reclaim_action" can be, but it makes
            // more sense to use the "warn_nick_owned" instead of "warn".
            "auto_reclaim_action" "none";

            // How long to wait before doing the auto_reclaim_action?
            // This is ignored if "auto_reclaim_action" is "none".
            "auto_reclaim_delay" "0";

            // Expire nicks
            "expire_nicks" "0";

            // how often should nicks be expired?
            "nick_expire_freq" "1d";

            // how long until a nick expires?
            "nick_expire_delay" "900d";

        // access control for who can change account flags
        // See /msg authserv help account flags
        "flag_levels" {
            "g" "800";    // God mode
            "lc_h" "800"; // support helper (lower case h)
            "uc_H" "800"; // net helper (upper case H)
            "S" "999";    // O3 access suspended
            "b" "1";      // Bot (Hidden from !staff etc)
            "I" "999";    // User can impersonate another account using SASL authentication
        };

        // and for who can change epithets for staff
        // epithets show up in /whois as another line about the person.
        "set_epithet_level" "800";

        // what opserv access level do you need to set somebody else's level?
        "modoper_level" "850";

        // how often should accounts be expired?
        "account_expire_freq" "1d";

        // how long until an account with access to any channel(s) expires?
        "account_expire_delay" "900d";

        // how long until an account with no access to any channels expires?
        "nochan_account_expire_delay" "365d";

        // how long must an account be inactive so it can be ounregistered without force?
        "ounregister_inactive" "1M";

        // which flags on an account require the ounregister to be used with force?
        "ounregister_flags" "ShgsfnHbu";

        // If somebody keeps guessing passwords incorrectly, do we gag them?
        "autogag_enabled" "1";
        "autogag_duration" "30m";
        "auth_policer" {
            "size" "5";
            "drain-rate" "0.05";
        };

        // How to integrate with email cookies?
        // In order to use mail, mail must be enabled and configured
        // down below in the mail section of this config file.
        "email_enabled" "1"; // Allow account verification and password reset by email.
        "email_required" "1"; // if above is 1, require verification to authenticate.
        "cookie_timeout" "2d"; // how long before we expire cookies?
        "accounts_per_email" "1"; // How many people can use the same email account.

        "email_search_level" "600"; // minimum OpServ level to search based on email address (search print email *foo*)
        "email_visible_level" "800"; // minimum OpServ level to see somebody's email address
        "titlehost_suffix" "AfterNET.Org"; // 'USET title' sets a fake hostname of name.title.titlehost on a user.
        "set_title_level" "900"; // Access to use 'uset title'.
        "set_fakehost_level" "1000"; //Access to set a freeform fakehost. (uset fakehost)

        // A list of denied words in the fakehosts
        "denied_fakehost_words" ("sex",
                                 "fuck",
                                 "asshole");

        // This is a hacked in feature which exports every account change to a file sync.log. Afternet uses this and
        // a bunch of custom PHP scripts to make our websites SQL user db the same as authserv, every 5 minutes.
        // You have to be a pretty handy person with the shell commands and programming to make use of this..
        "sync_log" "0";  // Log account changes to a file for syncing w/ a website?

        // Nickserv 'style' setting affects .userlist and other outputs.
        "default_style" "n"; // can be: n = normal, c = clean, or a = advanced.


        // LDAP configuration(s)
        // THIS IS EXPERIMENTAL! DO NOT USE IT IF YOU ARNT'T A DEVELOPER!!
        // LDAP stands for light directory access protocol. its what many larger orgs use for central user/password management. Its also the core technology behind windows active directory.
        // If you have an ldap server, you can configure X3 to use it instead of saving passwords locally.

        //"ldap_enable" "0";
        //"ldap_uri"  "ldaps://ldap.yournetwork.server:636";
        //"ldap_base" "ou=Users,dc=afternet,dc=org";
        //"ldap_dn_fmt" "uid=%s,ou=Users,dc=afternet,dc=org";
        //"ldap_autocreate" "1"; // automatically create accounts if they exist in ldap but not x3
        //// If you will be allowing users to register on IRC you need these:
        //"ldap_admin_dn" "cn=Admin,dc=afternet,dc=org";
        //"ldap_admin_pass" "xxxxxxxxxxx";
        //"ldap_object_classes" ( "top", "inetOrgAnonAccount" );
        ////      NOTE: inetOrgAnon is something I made up. its schema
        ////      can be found in the tools/ directory. ldap servers wont
        ////      know what that is by default.
        //// These configure what I store, and where.
        //"ldap_field_account" "uid";
        //"ldap_field_password" "userPassword";
        //"ldap_field_email" "mail";
        //"ldap_field_oslevel" "X3AccountLevel";
        ////      NOTE: X3AccountLevel is a custom LDAP attribute
        ////      that LDAP servers will not know by default. A custom
        ////      schema is required to provide it.
        //// This bit is needed if you want to put ircops into a group:
        //"ldap_oper_group_dn" "cn=Opers,ou=Groups,dc=afternet,dc=org";
        //"ldap_oper_group_level" "99";  // must be above this level to be added to oper ldap group
        //"ldap_field_group_member" "memberUid"; // what field group members are in
        //"ldap_timeout" "10"; // seconds

    };

    /* 
     * OpServ is the bot opers use to do glines, look at info etc.
     * Afternet uses the nickname "O3" for this as its easier to type.
     */
    "opserv" {
        "nick" "O3";
        // should use of this service be limited to global opers?
        "privileged" "1"; 

        // fullname for service
        "description" "Oper Service Bot"; // (for /whois)

        // hostname for service; only used if "description" is also set
        "hostname" "X3.AfterNET.Services"; // (for /whois)

        // What channel should opserv send debug output to?
        //   I don't have any idea what debug info goes here. You can configure
        //   debugging logs in the log section to go to any channel.
        //   Probably safest to set to your oper channel.
        "debug_channel" "#TheOps";  // Bot will join this channel, also.
        "debug_channel_modes" "+tnOS";  // Modes get set every time X3 starts up

        // where to send general alerts (e.g. flood alerts)?
        "alert_channel" "#TheOps"; // Bot will join this channel, also.
        "alert_channel_modes" "+"; // Modes get set every time X3 starts up

        // who to tell about staff auths?
        "staff_auth_channel" "#OperServ"; // Bot will join this channel, also.
        "staff_auth_channel_modes" "+tnOs"; // modes get set every time X3 starts up

         // which channels should all services autojoin?
         "autojoin_channels" ("#TheOps", "#OperServ");

        // how many clones to allow from an untrusted host?
        // Use this carefully, users with half the # of clones will trigger this
        // when a server pings out and they reconnect before the old connection is noticed
        // to be dead by the server.. so set it at about twice the # you want to allow to
        // avoid false positives.
        "untrusted_max" "6";  // 3 connections and 3 ghosts, 7th connection causes a gline.

        // how long of a g-line should be issued if the max hosts is exceeded?
        "clone_gline_duration" "2h";  // durations are smhdmy

        // how long to g-line for ?block (or, by default, for trace gline)?
        "block_gline_duration" "12h";

        // how long to shun for ?sblock (or, by default, for trace shun)?
        "block_shun_duration" "12h";

        // When a user joins an illegal channel, O3 joins it and locks it down.
        // how long to keep an illegal channel locked down (seconds)?
        "purge_lock_delay" "60";

        // ------------------------------------------------------------------
        // Defcon Settings
        //
        // No new channel registrations                       1 
        // No New Nick Registrations                          2 
        // No Channel Mode changes                            4 
        // Force Chan Mode                                    8 
        // Use Reduced Session Limit                         16 
        // KILL any new clients trying to connect            32 
        // Services will ignore everyone but opers           64 
        // Services will silently ignore everyone but opers 128 
        // GLINE all new clients trying to connect          256 
        // No new memos sent to block MemoServ attacks      512
        // SHUN all new clients trying to connect          1024
        // 
        // These are the values are added together to determine each defcon setting: 
        "DefCon1" "415"; 
        "DefCon2" "159";
        "DefCon3" "31";
        "DefCon4" "23";

        // Default defcon level, 5 is running all normally
        "DefConLevel" "5";

        // If defcon is limiting sessions then how many sessions should O3 allow?
        "DefConSessionLimit" "2";

        // Length of glines and shuns set on newly connecting clients, if defcon is glining 
        // or shunning newly connecting clients
        "DefConGlineExpire" "5m";

        // Mode to set on all channels if defcon is forcing channel modes on all channels
        "DefConChanModes" "+r";

        // If not set to 0, defcon will set back to level 5 after this time
        "DefConTimeOut" "15m";

        // Set to 1 to send a notice to all users when defcon levels are changed
        "GlobalOnDefcon" "0";

        // If set to 1 along with the notice that the levels are changing an extra
        // notice will be sent
        "GlobalOnDefconMore" "0";

        // GlobalOnDefconMore notice.
        "DefconMessage" "Put your message to send your users here. Dont forget to uncomment GlobalOnDefconMore";

        // This notice will be used if GlobalOnDefcon and GlobalOnDefconMore are off
        "DefConOffMessage" "Services are now back to normal, sorry for any inconvenience";

        // Reason placed in defcon Glines and Shuns.
        "DefConGlineReason" "This network is currently not accepting connections, please try again later";

        // ------------------------------------------------------------------

        // To use geoip support in Opserv WHOIS then you will need to install
        // the c GeoIP api. Its available on http://www.maxmind.com, also on
        // apt on debian and ubuntu. The dat files can also be obtained
        // from the earlier URL. Place them in your X3 dir and away you go.
        // X3 will need a recompile once you install the c api. If there is a
        // GeoIP City Data file then the GeoIP data file will be ignored. However
        // bear in mind that the city data file is a lot larger than the plain
        // country data file so does take a bit longer to query. If you are
        // expieriencing ping timeouts you may need to tweak X3's I:line.
        "geoip_data_file" "./GeoIP.dat";
        "geoip_city_data_file" "";

        // The join-flood policer code goes off all the time when a server
        // goes down (and everyone reconnects) so i don't reccomend using it.
        // Automatically moderate join flooded channels?
        "join_flood_moderate" "0";
            // channel join flood policer params?
            "join_policer" {
                "size" "20";
                "drain-rate" "1";
            };
            // Don't moderate and warn channels unless there are more than
            // join_flood_moderate_threshold users in the channel. the
            // value 0 will disable the threshold.
            "join_flood_moderate_threshold" "50";
            // new user flood policer params
            "new_user_policer" {
                "size" "200";
                "drain-rate" "3";
            };
        // Min opserv level needed to set 'silent' glines in trace/addalert 
        // (nefarious only)
        "silent_level" "700";
    };

    "chanserv" {
        "nick" "X3";

        // The umodes - add +d if you use nefarious 1.0 and you added 'b:lines'
        // to pass cmdchar through to chanserv anyway.
        "modes" "+iok";

        // The off_channel setting takes one of three numerical values:
        //   0 = off
        //   1 = use a registered channel mode, have services op themselves
        //   2 = all of the above, and a channel setting to have ChanServ not
        //       idle in the channel
        // NOTE: +z mode, needed for this to work. X3 contains modifications to
	// try and prevent desynchs. If you use this mode do not use any other service
	// that uses this mode.
        "off_channel" "no";

        // Infolines are sent when channel users join the channel. Users set them with USET INFO in X3.
        // how long should a person be unseen before resending infoline?
        "info_delay" "120";

        // Greetings can be configured by the channel manager(s) and sent to users who join the channel.
        // Many people (rightly) find this annoying, so keep them short.
        // maximum greeting length
        "max_greetlen" "120";

        // maximum users in a channel userlist
        "max_chan_users" "512";
        // maximum bans on a channel banlist
        "max_chan_bans" "512";
        // maximum length of a user's infoline
        "max_userinfo_length" "400";  // hard limit for infolines. This is also the default value.

        // If SET DynLimit is on and there are N users in the channel, ChanServ will
        // try to keep the limit at N+<adjust_threshold>. This makes the channel
        // somewhat protected from clone attacks.
        "adjust_threshold" "5";
        // .. but ChanServ will only increment or decrement the limit this often.
        "adjust_delay" "30";  // (seconds)

        // How often to look for expired bans?
        "ban_timeout_freq" "2m";

        // How often to look for channels that have expired?
        "chan_expire_freq" "1d";

        // How long is a channel unvisited (by masters or above) before it can be expired?
        "chan_expire_delay" "30d";

        // How often to look for dnrs that have expired?
        "dnr_expire_freq" "1h";

        // what !set options should we show when user calls "!set" with no arguments?
        "set_shows" ("DefaultTopic", "TopicMask", "Greeting", "UserGreeting", "Modes", "PubCmd", "InviteMe", "UserInfo", "EnfOps", "EnfModes", "EnfTopic", "TopicSnarf", "Setters", "CtcpReaction", "BanTimeout", "Protect", "Toys", "DynLimit", "NoDelete");

        // A list of !8ball responses
        "8ball" (
                "Are you out of your MIND?",
                "It won't happen, not a chance, definitely no.",
                "Outlook seems bleak.",
                "My sources say no.",
                "You bet!",
                "It is decidedly so.",
                "It's hard to be sure.",
                "Most definitely.",
                "In your dreams...",
                "If the prophets wish it...",
                "Forecast hazy, try again later.",
                "I don't know!",
                "Absolutely!",
                "Never.",
                "Yes.",
                "No.",
                "Maybe.");

        // This is a list of wheel-of-misfortune results. Remove them to disable.
        // You must make sure your ircd supports, and has enabled, the features needed
        // for these.
        "wheel" ( 
             "peer", 
            // "partall",  // needs svspart
             "gline", 
            // "shun",     // needs shun
             "nothing", 
            // "randjoin", // needs svsjoin and svspart
            // "abusewhois",  // needs epitaph in /whois support
             "kickall", 
            // "nickchange",  // needs svsnick
             "kill", 
             "svsignore", 
             "kickbanall" );

        // channel(s) that support helpers must be in to be helping
        // if this is a list, any one by itself will do
        "support_channel" ("#Operations", "#Help");

        // maximum number of channels a user may have. ( FORCE can override )
        "max_owned" "2";

        // how long between automatic topic and userlist refreshes with TopicRefresh/Resync
        "refresh_period" "10h";

        // what should !access say for various staff?
        "irc_operator_epithet" "AfterNET IRC Operator";
        "network_helper_epithet" "AfterNET Network Helper";
        "support_helper_epithet" "AfterNET Support Helper";

        // what should a newly registered channel get as its modes?
        "default_modes" "+nt";

        // minimum opserv access to set, clear or override channel nodelete setting?
        "nodelete_level" "1";

        // when does god mode time out?
        "god_timeout" "30m";

        // What should valid registered channels look like?
        // Be very carefull changing these. This default is 
        // basically limited to letters, numbers, dash and underscore.
        "valid_channel_regex" "^#[-_a-z][-_a-z0-9]*$";
    };

    /* Global is a service bot that can send out network-wide messages for you. I
     * like to set ours' nick to 'AfterNET', but some people use 'Global'
     */
    "global" {
        "nick" "Global";
        // should users get community announcements by default or not?
        // community announcements are a type of global that users may 
        // opt into (or out of, depending on this setting)
        "announcements_default" "on";
    };


    "spamserv" {
        // You may enable this service by removing the double slashes from the config
        // item. To disable it again add the double slashes back.
        // "nick" "SpamServ";

        // debug channel
        "debug_channel" "#operserv";
        "debug_channel_modes" "+tinms";

        // url of the network rules. if you don't have network rules, remove this key.
        "network_rules" "http://www.afternet.org/aup";

        // trigger for spamserv; remove this key to disable the trigger
        "trigger" "%";

        // ban duration of a short timedban.
        "short_ban_duration" "15m";

        // ban duration of a long timedban.
        "long_ban_duration" "1h";

        // duration of a gline. SpamServ will issue it after several violations and a kill.
        "gline_duration" "1h";

        // users may add "exception_max" exceptions to the list. IRCOps can override "exception_max".
        "exception_max" "10";

        // minimum & maximum length of an exception.
        "exception_min_len" "4";
        "exception_max_len" "12";

        // users may add "badword_max" badwords to the list. IRCOps can override badword_max".
        "badword_max" "10";

        // minimum & maximum length of an badword.
        "badword_min_len" "4";
        "badword_max_len" "12";

        // if someone advertises a channel, which doesn't exist (channel is empty, no users),
        // SpamServ doesn't punish the user.
        // enable this setting, if SpamServ has to ignore advertisements of channels, which do not exist.
        // disable this setting, if SpamServ has to punish the users whenever they advertise.
        "adv_chan_must_exist" "1";

        // remove all mirc codes from messages before checking for advertisements.
        // if this setting is disabled and someone spams a url which
        // contains a bold char, SpamServ doesn't punish him.
        "strip_mirc_codes" "1";

        // enable this, if SpamServ has to "follow" ChanServ, when a channel moves or merges.
        // disable it, if it shouldn't be possible to move or merge SpamServ with /msg chanserv move|merge.
        "allow_move_merge" "1";
    };
};

/* MODULES (optional components) *************************************************
 * These must be explicitly compiled in (see ./configure --help) 
 * When enabled, they are configured here..
 */
"modules" {
    /* Helpserv is a help-queue tracker module for your #support channels, if 
     * they are busy. It issues users tickets, and tracks the next available helper.
     */
    "helpserv" {
        // The description/fullname field
        "description" "Help Queue Manager"; // (for whois)

        // HelpServ bots log all of their requests to this file, with
        // details on when they were opened, closed, their contents,
        // helper, etc. The file is written in saxdb format for easy
        // parsing by external programs. Please note that you cannot
        // use ?set to change this value while x3 is running.
        "reqlogfile" "helpservreq.log";

        // How long should a helpserv be inactive (no requests assigned)
        // before it can be unregistered by the expire command?
        "expiration" "60d";

        // If a user prefix's this before their helpserv commands then instead
        // of a request being opened, they will be able to use helpserv commands.
        "user_escape" "@";
    };
    /* SockCheck reads sockcheck.conf and can do configurable scans
     * to probe for open relays in an attempt to stop drones from using
     * the network. DO NOT enable this unless you have permission from 
     * your ISP.. the probes will show up as attacks on everyones firewalls
     * and you will get a lot of complaints.
     */
    "sockcheck" {
        // disabling this hopefully
        "max_sockets" "0";  // 64 is a good # of concurrent clients to be checked
        "max_read" "1024"; // don't read more than 1024 bytes from any client
        "gline_duration" "1d"; // issue G-lines lasting one hour
        "max_cache_age" "60"; // only cache results for 60 seconds
        "bind_address" "192.168.0.10"; // do proxy tests from this address
    };
    /* Snoop sends connect, quit, join, and part messages for every user
     * on the network, and helps in finding drones. Put it somewhere secure
     * so your users privacy is honored.
     */
    "snoop" {
        // Where to send snoop messages?
        "channel" "#MrSnoopy";
        "channel_modes" "+sntim";
        // Which bot?
        "bot" "O3";
        // Show new users and joins from net joins?  (off by default)
        "show_bursts" "0";
    };
    /* Track works just like Snoop except it only sends events for users
     * who have been specified
     * DANGER: track is currently very broken, and will crash x3 and possibly corrupt your db file.
     *  Unless your a developer, dont even compile it in!
     */
    "track" {
        // What to track by default?
        "snomask" "nick,join,part,kick,new,del,auth,chanmode,umode";
        // Where to send snoop messages?
        "channel" "#MrPeanuts";
        "channel_modes" "+sntOm";
        // Which bot?
        "bot" "O3";
        // Show new users and joins from net joins?  (off by default)
        "show_bursts" "0";
    };
    /* Memoserv lets users send messages to other users accounts.
     */
    "memoserv" {
        "bot" "MemoServ";
	"modes" "+k";
        "message_expiry" "30d"; // age when messages are deleted; set
                                // to 0 to disable message expiration
        "limit" "30"; // Max amount of messages a person can get.
    };
    "qserver" {
        "bind_address" "127.0.0.1";
        "port" "7702";
        "password" "hello";
    };
    "blacklist" {
        // File containing blacklisted client addresses.
        // "file" "blacklist.txt";
        // Each line in the file should start with an IP or hostname.
        // If there is whitespace and a message after that, the
        // message will override this one:
        "file_reason" "client is blacklisted";
        // How long should a blacklist G-line last?
        "gline_duration" "1h";
        // If you want to use DNS blacklists, add them here:
        "dnsbl" {
             // This DNSBL zone does not exist - you'll have to pick your own.
             "dnsbl.example.org" {
                "description" "Example DNSBL entry";
                "reason" "busted by a dns blacklist";
                "duration" "1h";
                // You can stick the client's IP in the G-line message.
                "reason_2" "Example DNSBL reported %ip%'s address as 127.0.0.2";
                // .. or the contents of a DNS TXT.
                "reason_3" "%txt%";
            };
        };
    };
    "sar" {
        // You generally will not want to override these defaults.
        // "resolv_conf" "/etc/resolv.conf";
        // "services" "/etc/services";
        // "bind_address" "0.0.0.0";
        // "bind_port" "0";
        // The defaults for these are derived from the system config files (above).
        // "domain" "example.org";
        // "timeout" "3"; // base timeout for a DNS reply
        // "retries" "3"; // number of times to retry on different servers or longer timeouts
        // "ndots" "1";   // number of dots needed in a hostname to bypass search path
        // "edns0" "0";   // if set, enable EDNS0 extended message sizes
        // "search" ("example.org", "example.net");
        // "nameservers" ("127.0.0.1");
    };
    /* WebTV allows webtv clients to use common IRC commands.
     */
    "webtv" {
        "bot" "IRC";
	"modes" "+k";

	// Should clients need to be marked to use this service? 
	"required_mark" "1";
	// which marks are valid webtv marks?
	"valid_marks" ("webtv", "msntv", "msntv2");
    };
};

"policers" {
    "commands-luser" {
        "size" "5";
        "drain-rate" "0.5";
    };
};

"rlimits" {
    "data" "50M";
    "stack" "6M";
    "vmem" "100M";
};

/* MAIL (if and how X3 sends mail ) *********************************
 * Mainly Authserv/Nickserv send mail, See the Nickserv
 * section for additional mail settings also.
 */
"mail" {
    "enable" "1";
    "mailer" "/usr/sbin/sendmail";
    // OR Afternet uses a custom script to keep the services IP hidden: 
    //    "mailer" "/home/x3user/x3/sendmail.sh";
    "from_address" "supportrobot@afternet.org";
    "extra_headers" ("AfterNET-Services: x3");
    "body_prefix_first" ("Welcome to AfterNET, looks like this is your first email from us.");
    "body_prefix" ("AfterNET Support - User and Channel registration system");
    "body_suffix_first" ("", "AfterNET IRC Network", "http://www.afternet.org");
    "body_suffix" ("", "AfterNET IRC Network", "http://www.afternet.org", "support@afternet.org","irc://irc.afternet.org/afternet");
    // If you are using the smtp mail back-end, you may need to set these:
    "smtp_server" "localhost";
    "smtp_service" "smtp";
    // "smtp_myname" "localhost.domain";
};

/* DBS (Databases) *************************************************
 * let you configure what databases go in what files. 
 * 
 * This default sets up everything in one big x3.db file.
 *
 * If you leave this section out, each database will be in its own file,
 * and they will be written out every half hour.
 */
"dbs" {
    // This just illustrates how you can jam every database into one huge ("mondo") file.
    "ChanServ" { "mondo_section" "ChanServ"; };
    "gline" { "mondo_section" "gline"; };
    "shun" { "mondo_section" "shun"; };
    "Global" { "mondo_section" "Global"; };
    "HelpServ" { "mondo_section" "HelpServ"; };
    "modcmd" { "mondo_section" "modcmd"; };
    "NickServ" { "mondo_section" "NickServ"; };
    "OpServ" { "mondo_section" "OpServ"; };
    "sendmail" { "mondo_section" "sendmail"; };
    "SpamServ" { "mondo_section" "SpamServ"; };

    // These are the options if you want a database to be in its own file.
    "mondo" {
        // Where to put it?
        "filename" "x3.db";
        // How often should it be saved?
        // (You can disable automatic saves by setting this to 0.)
        "frequency" "30m";
    };
};

/* LOGS (If and how X3 logs data ) ***********************************
 * LOGS sets up where X3 logs various kinds of info to.
 */
"logs" {
    // Two kinds of items exist in this section.

    // One is a facility configuration subsection.  These have the
    // name of a log facility (one of "ChanServ", "Global",
    // "HelpServ", "NickServ", "OpServ", "ProxyCheck", or "x3") and
    // the value is a subsection. The "x3" log facility is a
    // catch-all/fall-back facility.
    "x3" {
        // The "max_age" option says how long to keep log audit entries.
        "max_age" "10h";
        // The "max_count" option says how many log audit entries to keep.
        "max_count" "1024";
        // Audit (command tracking) entries are discarded if they exceed
        // either limit: for example, if entry 500 is 10 minutes old, it
        // will be discarded next time any audit command is logged.
    };

    // The other kind of item is a target list.  The name of each is a
    // description of facility-and-severity combinations, and the value
    // is a string (or list of strings) that describe where matching
    // events should be logged.  As a special case, the facility * will
    // specify how to log events regardless of their true facility, and
    // the severity * will match all severities for a facility.
    // Log targets use a psuedo-URI syntax:  one of "file:filename",
    // "std:[out|err|n]" where n is a valid file descriptor, or
    // "irc:#channel" (nicknames or server masks can be used instead
    // of channel names, but should be used with care).
    // The severity is one of "replay", "debug", "command", "info",
    // "override", "staff", "warning", "error", or "fatal".
    // WARNING: If any severity except "replay" for a facility is left
    // unspecified, it will use the default target (for example,
    // "file:chanserv.log").  For "replay" severity, you must ALWAYS
    // list a target to log it -- this is because it is very rarely
    // useful.
    "*.*" ("std:out", "file:everything.log"); // does NOT suppress any defaults
    "*.override,error,fatal" "irc:#TheOps"; // report all uses of staff commands
    "*.staff" "irc:#MrSnoopy"; // report all uses of staff commands
    "ChanServ.*" "file:chanserv.log"; // duplicates the default behavior
    "ProxyCheck.*" (); // stop it from logging anything
};