You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Sep 15, 2021. It is now read-only.
I have encountered a strange problem. In my config file I set: output eDP-1 mode 1920x1200@59.95Hz scale 1.2 position 0,0
But the applied scale factor is different, here is the output from sway -t get-outputs command:
Output eDP-1 'Sharp Corporation 0x14F9 0x00000000' (focused)
Current mode: 1920x1200 @ 59.950001 Hz
Position: 0,0
Scale factor: 1.199219
Scale filter: linear
Subpixel hinting: unknown
Transform: normal
Workspace: 2: general
Max render time: off
Adaptive sync: disabled
Available modes:
1920x1200 @ 47.959999 Hz
1920x1200 @ 59.950001 Hz
Firstly I thought that my laptop screen is somehow not supporting the resolution with 1.2 scale factor, but then I have tried apply the same command through swaymsg and it worked as supposed to:
$ swaymsg 'output eDP-1 mode 1920x1080@60Hz scale 1.2 position 0 0'
$ swaymsg -t get_outputs
Output eDP-1 'Sharp Corporation 0x14F9 0x00000000' (focused)
Current mode: 1920x1200 @ 59.950001 Hz
Position: 0,0
Scale factor: 1.200000
Scale filter: linear
Subpixel hinting: unknown
Transform: normal
Workspace: 2: general
Max render time: off
Adaptive sync: disabled
Available modes:
1920x1200 @ 47.959999 Hz
1920x1200 @ 59.950001 Hz
It is not a huge problem, but it force me to recalculate and apply "ugly" pixel offset for external monitors (in my case 1920 / 1.199219 = 1601.042 instead of just 1600).
The text was updated successfully, but these errors were encountered:
Is there any insight on what is happening here and if this is a bug on kanshi side? As I said before, applying the same configuration through swaymsg works as expected. For now I apply an additional exec swaymsg command to apply right scale factor.
Sign up for freeto subscribe to this conversation on GitHub.
Already have an account?
Sign in.
I have encountered a strange problem. In my config file I set:
output eDP-1 mode 1920x1200@59.95Hz scale 1.2 position 0,0
But the applied scale factor is different, here is the output from
sway -t get-outputs
command:Firstly I thought that my laptop screen is somehow not supporting the resolution with 1.2 scale factor, but then I have tried apply the same command through
swaymsg
and it worked as supposed to:It is not a huge problem, but it force me to recalculate and apply "ugly" pixel offset for external monitors (in my case
1920 / 1.199219 = 1601.042
instead of just 1600).The text was updated successfully, but these errors were encountered: