My Daikin64 Air Con is power off

[Trion]

My Daikin64 air con is automatic power off when air con temperature is changed .
My AC remote (Daikin Acson A/C Conditioning APGS02 ECGS02 Controller).
Test with #include <ir_Daikin.h>
Receive Status test with irRecvDump Demo : response IRDaikin64
My Test Code is
Help Me what wrong in my code ( sorry for my bad english)

#include <IRremoteESP8266.h>
#include <IRsend.h>
#include <IR_Daikin.h>
IRDaikin64 daikin(IrLed);
void setup() {
daikin.begin();
daikin.setPowerTogle(true);
daikin.setMode(kDaikin64Cool);
daikin.send();
//change temp 16 to 30
for(int i=15;i<30;i++){
daikin.setTemp(i);
daikin.send();
}
}
void loop() {
}

[NiKiZe]

If you set power toggle it will switch state.

Some protocols do not support state, and only has a toggle. Since you set that toggle in your code (remove the power toggle line), it will change. (There is nothing we can do, since it is a limitation of the specific ac protocol)

[Damar15]

Hi, i have the same problem. So, there is nothing we can do to change temp only or mode only when trying to make our esp32 act like a AC remote?

[NiKiZe]

If this protocol uses a toggle, then you leave the "PowerToggle" in off state and it should only change other settings.
If unsure use dumpv3 program to collect what your remote actually sends.