Hitachi RAR-2P2

[step3528]

Bonjour,

je possède une clim Hitachi avec une télécommande RAR-2P2 et le code ne correspond pas a ceux qui sont déjà développer.
la trame de celle ci comporte 33bytes elle est proche du protocole HITACHI_AC344.

J'ai réussit a décoder les octets qui change suivant le mode mais je ne vois pas comment l'intégrer dans le fichier hitachi actuel.

merci

[crankyoldgit]

Translation to English:

Hello,

I have a Hitachi air conditioning with a RAR-2P2 remote control and the code does not correspond to those which are already developed.
the frame of this one comprises 33bytes it is close to the HITACHI_AC344 protocol.

I managed to decode the bytes which change depending on the mode but I don't see how to integrate it into the current hitachi file.

thank you

[crankyoldgit]

@step3528
You will need to read and follow these links:
Vous devrez lire et suivre ces liens:
https://github.com/crankyoldgit/IRremoteESP8266/wiki/Adding-support-for-a-new-IR-protocol
&
https://github.com/crankyoldgit/IRremoteESP8266/wiki/Adding-support-for-a-new-AC-protocol

[step3528]

Hello,

I started to decode the frames of the remote control RAR-2P2. I identified 8 bytes which changes.

is there a exemple code that allows sending the frame captured by IRrecvDumpV2 to the console?
does the exemple code DumbIRRepeater allow this?

thank you.

[crankyoldgit]

Don't be sorry, it's better than my French

[crankyoldgit]

How did you go?

[step3528]

hello,
I tested with IRsendDemo and the console started.

I identified the different bytes that change
mix byte 12 and 13 Same hitachi AC424
mix bytes 14 and 15 for the T °
mix bytes 26 and 27 for Heat mod (cool,heat,dry) and FAN speed
mix byte 28 and 29 for ON and OFF

the other bytes not change.

I have to synthesize correctly in an excel file.

[step3528]

I realized that there are 66 bytes 33 MSB and 33 LSB and I decode that 33

[crankyoldgit]

Per https://github.com/crankyoldgit/IRremoteESP8266/wiki/Adding-support-for-a-new-AC-protocol, please create a New Issue, and share your spreadsheet publicly when you do.

[step3528]

Hello,

I created this file.

https://docs.google.com/spreadsheets/d/1qDnKM3ZslWrR-skgQjaConq3U2b7RuzZK1tA64WYRBM/edit?usp=sharing

I am going to create a new issue.